Re: [PATCH] [V3] drm/i915: Enable VBT based BL control for DP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Jani. 

Best regard 

Mustamin


-----Original Message-----
From: Jani Nikula [mailto:jani.nikula@xxxxxxxxxxxxxxx] 
Sent: Wednesday, February 28, 2018 5:42 PM
To: Mustaffa, Mustamin B <mustamin.b.mustaffa@xxxxxxxxx>; intel-gfx@xxxxxxxxxxxxxxxxxxxxx
Cc: Mustaffa, Mustamin B <mustamin.b.mustaffa@xxxxxxxxx>
Subject: Re:  [PATCH] [V3] drm/i915: Enable VBT based BL control for DP

On Tue, 27 Feb 2018, Mustamin B Mustaffa <mustamin.b.mustaffa@xxxxxxxxx> wrote:
> Currently, BXT_PP is hardcoded with value '0'.
> It practically disabled eDP backlight on MRB (BXT) platform.
>
> This patch will tell which BXT_PP registers (there are two set of 
> PP_CONTROL in the spec) to be used as defined in VBT (Video Bios 
> Timing
> table) and this will enabled eDP backlight controller on MRB (BXT) 
> platform.
>
> v2:
>  - Remove unnecessary information in commit message.
>  - Assign vbt.backlight.controller to a backlight_controller variable and
>    return the variable value.
> v3:
>  - Rebased to latest code base.
>  - updated commit title.
>
> Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@xxxxxxxxx>

Pushed to dinq, thanks for the patch.

BR,
Jani.

> ---
>  drivers/gpu/drm/i915/intel_dp.c | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c 
> b/drivers/gpu/drm/i915/intel_dp.c index 475a19d76a49..20e3fcd2bf7e 
> 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -655,18 +655,15 @@ bxt_power_sequencer_idx(struct intel_dp 
> *intel_dp)  {
>  	struct drm_i915_private *dev_priv = 
> to_i915(intel_dp_to_dev(intel_dp));
>  
> +	int backlight_controller = dev_priv->vbt.backlight.controller;
> +
>  	lockdep_assert_held(&dev_priv->pps_mutex);
>  
>  	/* We should never land here with regular DP ports */
>  	WARN_ON(!intel_dp_is_edp(intel_dp));
>  
> -	/*
> -	 * TODO: BXT has 2 PPS instances. The correct port->PPS instance
> -	 * mapping needs to be retrieved from VBT, for now just hard-code to
> -	 * use instance #0 always.
> -	 */
>  	if (!intel_dp->pps_reset)
> -		return 0;
> +		return backlight_controller;
>  
>  	intel_dp->pps_reset = false;
>  
> @@ -676,7 +673,7 @@ bxt_power_sequencer_idx(struct intel_dp *intel_dp)
>  	 */
>  	intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
>  
> -	return 0;
> +	return backlight_controller;
>  }
>  
>  typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,

--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux