Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_psr.c | 199 +++++++++++++++++++--------------------
2 files changed, 96 insertions(+), 104 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 82a106b1bdbc..44b551f1576d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -780,6 +780,7 @@ struct i915_psr {
void (*enable_sink)(struct intel_dp *);
void (*activate)(struct intel_dp *);
void (*setup_vsc)(struct intel_dp *, const struct intel_crtc_state *);
+ void (*exit)(struct intel_dp *intel_dp, bool wait_exit);
};
enum intel_pch {
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 2ef374f936b9..e8c32c3afb0e 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -551,25 +551,12 @@ static void vlv_psr_disable(struct intel_dp *intel_dp,
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
uint32_t val;
- if (dev_priv->psr.active) {
- /* Put VLV PSR back to PSR_state 0 (disabled). */
- if (intel_wait_for_register(dev_priv,
- VLV_PSRSTAT(crtc->pipe),
- VLV_EDP_PSR_IN_TRANS,
- 0,
- 1))
- WARN(1, "PSR transition took longer than expected\n");
+ dev_priv->psr.exit(intel_dp, true);
- val = I915_READ(VLV_PSRCTL(crtc->pipe));
- val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
- val &= ~VLV_EDP_PSR_ENABLE;
- val &= ~VLV_EDP_PSR_MODE_MASK;
- I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
-
- dev_priv->psr.active = false;
- } else {
- WARN_ON(vlv_is_psr_active_on_pipe(dev, crtc->pipe));
- }
+ val = I915_READ(VLV_PSRCTL(crtc->pipe));
+ val &= ~VLV_EDP_PSR_ENABLE;
+ val &= ~VLV_EDP_PSR_MODE_MASK;
+ I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
}
static void hsw_psr_disable(struct intel_dp *intel_dp,
@@ -579,44 +566,100 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- if (dev_priv->psr.active) {
- i915_reg_t psr_status;
- u32 psr_status_mask;
-
- if (dev_priv->psr.aux_frame_sync)
- drm_dp_dpcd_writeb(&intel_dp->aux,
- DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
- 0);
+ dev_priv->psr.exit(intel_dp, true);
+}
- if (dev_priv->psr.psr2_support) {
- psr_status = EDP_PSR2_STATUS;
- psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
+static void hsw_psr_exit(struct intel_dp *intel_dp, bool wait_exit)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ i915_reg_t psr_status;
+ u32 psr_status_mask;
- I915_WRITE(EDP_PSR2_CTL,
- I915_READ(EDP_PSR2_CTL) &
- ~(EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE));
+ if (!dev_priv->psr.active) {
+ if (dev_priv->psr.psr2_support)
+ WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
+ else
+ WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
+ return;
+ }
- } else {
- psr_status = EDP_PSR_STATUS;
- psr_status_mask = EDP_PSR_STATUS_STATE_MASK;
+ if (dev_priv->psr.aux_frame_sync)
+ drm_dp_dpcd_writeb(&intel_dp->aux,
+ DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF, 0);
- I915_WRITE(EDP_PSR_CTL,
- I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
- }
+ if (dev_priv->psr.psr2_support) {
+ psr_status = EDP_PSR2_STATUS;
+ psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
- /* Wait till PSR is idle */
- if (intel_wait_for_register(dev_priv,
- psr_status, psr_status_mask, 0,
- 2000))
- DRM_ERROR("Timed out waiting for PSR Idle State\n");
+ I915_WRITE(EDP_PSR2_CTL,
+ I915_READ(EDP_PSR2_CTL) &
+ ~(EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE));
- dev_priv->psr.active = false;
} else {
- if (dev_priv->psr.psr2_support)
- WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
- else
- WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
+ psr_status = EDP_PSR_STATUS;
+ psr_status_mask = EDP_PSR_STATUS_STATE_MASK;
+
+ I915_WRITE(EDP_PSR_CTL,
+ I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
+ }
+
+ /* Wait till PSR is idle */
+ if (wait_exit && intel_wait_for_register(dev_priv, psr_status,
+ psr_status_mask, 0, 2000))
+ DRM_ERROR("Timed out waiting for PSR Idle State\n");
+
+ dev_priv->psr.active = false;
+}
+
+static void vlv_psr_exit(struct intel_dp *intel_dp, bool wait_exit)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ uint32_t val;
+
+ if (!dev_priv->psr.active) {
+ WARN_ON(vlv_is_psr_active_on_pipe(dev, crtc->pipe));
+ return;
}
+
+ if (intel_wait_for_register(dev_priv, VLV_PSRSTAT(crtc->pipe),
+ VLV_EDP_PSR_IN_TRANS, 0, 1))
+ WARN(1, "PSR transition took longer than expected\n");
+
+ /*
+ * Here we do the transition directly from
+ * PSR_state 3 (active - no Remote Frame Buffer (RFB) update) to
+ * PSR_state 5 (exit).
+ * PSR State 4 (active with single frame update) can be skipped.
+ * On PSR_state 5 (exit) Hardware is responsible to transition
+ * back to PSR_state 1 (inactive).
+ * Now we are at Same state after vlv_psr_enable_source.
+ */
+ val = I915_READ(VLV_PSRCTL(crtc->pipe));
+ val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
+ I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
+
+ /*
+ * Send AUX wake up - Spec says after transitioning to PSR
+ * active we have to send AUX wake up by writing 01h in DPCD
+ * 600h of sink device.
+ * XXX: This might slow down the transition, but without this
+ * HW doesn't complete the transition to PSR_state 1 and we
+ * never get the screen updated.
+ */
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
+
+ if (wait_exit && intel_wait_for_register(dev_priv,
+ VLV_PSRSTAT(crtc->pipe),
+ VLV_EDP_PSR_INACTIVE,
+ VLV_EDP_PSR_INACTIVE, 2000))
+ DRM_ERROR("Timed out waiting for PSR inactive state\n");
+
+ dev_priv->psr.active = false;
}
/**
@@ -718,60 +761,6 @@ static void intel_psr_work(struct work_struct *work)
mutex_unlock(&dev_priv->psr.lock);
}
-static void intel_psr_exit(struct drm_i915_private *dev_priv)
-{
- struct intel_dp *intel_dp = dev_priv->psr.enabled;
- struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
- u32 val;
-
- if (!dev_priv->psr.active)
- return;
-
- if (HAS_DDI(dev_priv)) {
- if (dev_priv->psr.aux_frame_sync)
- drm_dp_dpcd_writeb(&intel_dp->aux,
- DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
- 0);
- if (dev_priv->psr.psr2_support) {
- val = I915_READ(EDP_PSR2_CTL);
- WARN_ON(!(val & EDP_PSR2_ENABLE));
- I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
- } else {
- val = I915_READ(EDP_PSR_CTL);
- WARN_ON(!(val & EDP_PSR_ENABLE));
- I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
- }
- } else {
- val = I915_READ(VLV_PSRCTL(pipe));
-
- /*
- * Here we do the transition drirectly from
- * PSR_state 3 (active - no Remote Frame Buffer (RFB) update) to
- * PSR_state 5 (exit).
- * PSR State 4 (active with single frame update) can be skipped.
- * On PSR_state 5 (exit) Hardware is responsible to transition
- * back to PSR_state 1 (inactive).
- * Now we are at Same state after vlv_psr_enable_source.
- */
- val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
- I915_WRITE(VLV_PSRCTL(pipe), val);
-
- /*
- * Send AUX wake up - Spec says after transitioning to PSR
- * active we have to send AUX wake up by writing 01h in DPCD
- * 600h of sink device.
- * XXX: This might slow down the transition, but without this
- * HW doesn't complete the transition to PSR_state 1 and we
- * never get the screen updated.
- */
- drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
- DP_SET_POWER_D0);
- }
-
- dev_priv->psr.active = false;
-}
-
/**
* intel_psr_single_frame_update - Single Frame Update
* @dev_priv: i915 device
@@ -854,7 +843,7 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv,
dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits;
if (frontbuffer_bits)
- intel_psr_exit(dev_priv);
+ dev_priv->psr.exit(dev_priv->psr.enabled, false);
mutex_unlock(&dev_priv->psr.lock);
}
@@ -895,7 +884,7 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
/* By definition flush = invalidate + flush */
if (frontbuffer_bits)
- intel_psr_exit(dev_priv);
+ dev_priv->psr.exit(dev_priv->psr.enabled, false);
if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
if (!work_busy(&dev_priv->psr.work.work))
@@ -956,11 +945,13 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
dev_priv->psr.enable_sink = vlv_psr_enable_sink;
dev_priv->psr.activate = vlv_psr_activate;
dev_priv->psr.setup_vsc = vlv_psr_setup_vsc;
+ dev_priv->psr.exit = vlv_psr_exit;
} else {
dev_priv->psr.enable_source = hsw_psr_enable_source;
dev_priv->psr.disable_source = hsw_psr_disable;
dev_priv->psr.enable_sink = hsw_psr_enable_sink;
dev_priv->psr.activate = hsw_psr_activate;
dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
+ dev_priv->psr.exit = hsw_psr_exit;
}
}
--
2.16.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
