On Thu, Feb 22, 2018 at 08:10:35PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Let's try to keep the details on the AKSV stuff concentrated
> in one place. So move the control bit and +5 data size handling
> there.
>
> Cc: Sean Paul <seanpaul@xxxxxxxxxxxx>
> Cc: Ramalingam C <ramalingam.c@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 42 +++++++++++++----------------------------
> 1 file changed, 13 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 217cc6aee477..328a03f14d8a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1059,29 +1059,11 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
> DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
> }
>
> -static uint32_t intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp,
> - bool has_aux_irq,
> - int send_bytes,
> - uint32_t aux_clock_divider,
> - bool aksv_write)
> -{
> - uint32_t val = 0;
> -
> - if (aksv_write) {
> - send_bytes += 5;
> - val |= DP_AUX_CH_CTL_AUX_AKSV_SELECT;
> - }
> -
> - return val | intel_dp->get_aux_send_ctl(intel_dp,
> - has_aux_irq,
> - send_bytes,
> - aux_clock_divider);
> -}
> -
> static int
> intel_dp_aux_xfer(struct intel_dp *intel_dp,
> const uint8_t *send, int send_bytes,
> - uint8_t *recv, int recv_size, bool aksv_write)
> + uint8_t *recv, int recv_size,
> + u32 aux_send_ctl_flags)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct drm_i915_private *dev_priv =
> @@ -1145,11 +1127,12 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> }
>
> while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
> - u32 send_ctl = intel_dp_get_aux_send_ctl(intel_dp,
> - has_aux_irq,
> - send_bytes,
> - aux_clock_divider,
> - aksv_write);
> + u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
> + has_aux_irq,
> + send_bytes,
> + aux_clock_divider);
> +
> + send_ctl |= aux_send_ctl_flags;
Actually I just realized this doesn't quite do what I wanted. Since
I now pass the full msg size this guy wants to load all of it into
the aux data registers. Since txbuf[] is on the stack we should just
end up loading some stack garbage which I suppose is fine from the
hardware POV (it should just ignore data right?).
But still perhaps not the best approach to access beyond the buffer
on the stack. So the fix would be to make txbuf[] five bytes longer
and maybe zeroing it to avoid loading stack garbage into the
registers.
>
> /* Must try at least 3 times according to DP spec */
> for (try = 0; try < 5; try++) {
> @@ -1287,7 +1270,7 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size);
>
> ret = intel_dp_aux_xfer(intel_dp, txbuf, txsize,
> - rxbuf, rxsize, false);
> + rxbuf, rxsize, 0);
> if (ret > 0) {
> msg->reply = rxbuf[0] >> 4;
>
> @@ -1310,7 +1293,7 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> return -E2BIG;
>
> ret = intel_dp_aux_xfer(intel_dp, txbuf, txsize,
> - rxbuf, rxsize, false);
> + rxbuf, rxsize, 0);
> if (ret > 0) {
> msg->reply = rxbuf[0] >> 4;
> /*
> @@ -5109,8 +5092,9 @@ int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
> txbuf[2] = DP_AUX_HDCP_AKSV & 0xff;
> txbuf[3] = DRM_HDCP_KSV_LEN - 1;
>
> - ret = intel_dp_aux_xfer(intel_dp, txbuf, sizeof(txbuf),
> - rxbuf, sizeof(rxbuf), true);
> + ret = intel_dp_aux_xfer(intel_dp, txbuf, sizeof(txbuf) + 5,
> + rxbuf, sizeof(rxbuf),
> + DP_AUX_CH_CTL_AUX_AKSV_SELECT);
> if (ret < 0) {
> DRM_ERROR("Write Aksv over DP/AUX failed (%d)\n", ret);
> return ret;
> --
> 2.13.6
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
