On Thu, Feb 22, 2018 at 12:25:46PM -0800, Pandiyan, Dhinakaran wrote: > On Thu, 2018-02-22 at 12:13 -0800, Rodrigo Vivi wrote: > > On Thu, Feb 22, 2018 at 11:57:03AM -0800, Pandiyan, Dhinakaran wrote: > > > On Thu, 2018-02-22 at 11:34 -0800, Rodrigo Vivi wrote: > > > > On Thu, Feb 22, 2018 at 08:59:49PM +0200, Ville Syrjälä wrote: > > > > > On Tue, Feb 20, 2018 at 06:23:47PM -0800, José Roberto de Souza wrote: > > > > > > When PSR/PSR2/GTC is enabled hardware can do AUX transactions by it > > > > > > self, so lets use the mutex register that is available in gen9+ to > > > > > > avoid concurrent access by hardware and driver. > > > > > > > > > > > > Reference: https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-skl-vol12-display.pdf > > > > > > Page 198 - AUX programming sequence > > > > > > > > > > BTW since HSW/BDW don't have the mutex we should really be disabling PSR > > > > > around aux ch usage on those platforms. Not sure how big of a locking > > > > > inversion exercise it would be to make that happen though. > > > > > > > > True. But I believe that can be handled differently. > > > > Probably with Aux power domains blocking PSR off "domain". > > > > Something similar to DC off. > > > > > > > > I actually had patches for that lost somewhere... :( > > > > > > > > > > Just a note, the spec explicitly says we should disable PSR around AUX > > > transactions for BDW (and HSW iirc). > > > > > > About using the power domain infra, I am not quite sure. The _get() and > > > _put() idiom makes sense when we want reference counting to handle > > > multiple consumers that want PSR to be disabled. Does anything else need > > > to enable/disable PSR? > > > > VLV/CHV vblanks?! :/ > > > > I keep forgetting VLV/CHV, sorry. This brings us back to the whole > "calling blocking functions from atomic contexts" problem. Not sure how > to handle that. > > Assuming we solve that problem, we should also probably avoid polluting > the power domain code and add reference counting for PSR. However, since > all this is not required for BDW/HSW, I am inclined towards a simpler > solution for BDW/HSW AUX usage. I agree. Then probably the simpler solution could than be applied on VLV/CHV... who knows. anyways separated from this patch here... let's keep this one clean. > > > > > > > > > > > > > > > > > > > > > > > > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> > > > > > > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> > > > > > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx> > > > > > > --- > > > > > > drivers/gpu/drm/i915/i915_reg.h | 9 ++++++++ > > > > > > drivers/gpu/drm/i915/intel_dp.c | 50 ++++++++++++++++++++++++++++++++++++++++ > > > > > > drivers/gpu/drm/i915/intel_drv.h | 1 + > > > > > > 3 files changed, 60 insertions(+) > > > > > > > > > > > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > > > > > > index 1412abcb27d4..a62e3c1badab 100644 > > > > > > --- a/drivers/gpu/drm/i915/i915_reg.h > > > > > > +++ b/drivers/gpu/drm/i915/i915_reg.h > > > > > > @@ -5318,6 +5318,7 @@ enum { > > > > > > #define _DPA_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6401c) > > > > > > #define _DPA_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64020) > > > > > > #define _DPA_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64024) > > > > > > +#define _DPA_AUX_CH_MUTEX (dev_priv->info.display_mmio_offset + 0x6402C) > > > > > > > > > > > > #define _DPB_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64110) > > > > > > #define _DPB_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64114) > > > > > > @@ -5325,6 +5326,7 @@ enum { > > > > > > #define _DPB_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6411c) > > > > > > #define _DPB_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64120) > > > > > > #define _DPB_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64124) > > > > > > +#define _DPB_AUX_CH_MUTEX (dev_priv->info.display_mmio_offset + 0x6412C) > > > > > > > > > > > > #define _DPC_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64210) > > > > > > #define _DPC_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64214) > > > > > > @@ -5332,6 +5334,7 @@ enum { > > > > > > #define _DPC_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6421c) > > > > > > #define _DPC_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64220) > > > > > > #define _DPC_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64224) > > > > > > +#define _DPC_AUX_CH_MUTEX (dev_priv->info.display_mmio_offset + 0x6422C) > > > > > > > > > > > > #define _DPD_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64310) > > > > > > #define _DPD_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64314) > > > > > > @@ -5339,6 +5342,7 @@ enum { > > > > > > #define _DPD_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6431c) > > > > > > #define _DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320) > > > > > > #define _DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324) > > > > > > +#define _DPD_AUX_CH_MUTEX (dev_priv->info.display_mmio_offset + 0x6432C) > > > > > > > > > > > > #define _DPF_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64510) > > > > > > #define _DPF_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64514) > > > > > > @@ -5346,6 +5350,7 @@ enum { > > > > > > #define _DPF_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6451c) > > > > > > #define _DPF_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64520) > > > > > > #define _DPF_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64524) > > > > > > +#define _DPF_AUX_CH_MUTEX (dev_priv->info.display_mmio_offset + 0x6452C) > > > > > > > > > > > > #define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL) > > > > > > #define DP_AUX_CH_DATA(port, i) _MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */ > > > > > > @@ -5378,6 +5383,10 @@ enum { > > > > > > #define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5) > > > > > > #define DP_AUX_CH_CTL_SYNC_PULSE_SKL(c) ((c) - 1) > > > > > > > > > > > > +#define DP_AUX_CH_MUTEX(port) _MMIO_PORT(port, _DPA_AUX_CH_MUTEX, _DPB_AUX_CH_MUTEX) > > > > > > +#define DP_AUX_CH_MUTEX_ENABLE (1 << 31) > > > > > > +#define DP_AUX_CH_MUTEX_STATUS (1 << 30) > > > > > > + > > > > > > /* > > > > > > * Computing GMCH M and N values for the Display Port link > > > > > > * > > > > > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c > > > > > > index f20b25f98e5a..af07563bafba 100644 > > > > > > --- a/drivers/gpu/drm/i915/intel_dp.c > > > > > > +++ b/drivers/gpu/drm/i915/intel_dp.c > > > > > > @@ -1081,6 +1081,45 @@ static uint32_t intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp, > > > > > > aux_clock_divider); > > > > > > } > > > > > > > > > > > > +static bool intel_dp_aux_ch_trylock(struct intel_dp *intel_dp) > > > > > > +{ > > > > > > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); > > > > > > + struct drm_i915_private *dev_priv = > > > > > > + to_i915(intel_dig_port->base.base.dev); > > > > > > + > > > > > > + if (INTEL_GEN(dev_priv) < 9) > > > > > > + return true; > > > > > > + > > > > > > + I915_WRITE(intel_dp->aux_ch_mutex_reg, DP_AUX_CH_MUTEX_ENABLE); > > > > > > + > > > > > > + /* Spec says that mutex is acquired when status bit is read as unset, > > > > > > + * if set it should be read again after 500usec. Here waiting for > > > > > > + * 2msec or 4 tries before give up. > > > > > > + */ > > > > > > + if (__intel_wait_for_register(dev_priv, intel_dp->aux_ch_mutex_reg, > > > > > > + DP_AUX_CH_MUTEX_STATUS, 0, 500, 2, > > > > > > + NULL)) { > > > > > > + DRM_WARN("dp_aux_ch port locked for too long"); > > > > > > + return false; > > > > > > + } > > > > > > + > > > > > > + return true; > > > > > > +} > > > > > > + > > > > > > +static void intel_dp_aux_ch_unlock(struct intel_dp *intel_dp) > > > > > > +{ > > > > > > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); > > > > > > + struct drm_i915_private *dev_priv = > > > > > > + to_i915(intel_dig_port->base.base.dev); > > > > > > + > > > > > > + if (INTEL_GEN(dev_priv) < 9) > > > > > > + return; > > > > > > + > > > > > > + /* setting the status bit releases the mutex + keep mutex enabled */ > > > > > > + I915_WRITE(intel_dp->aux_ch_mutex_reg, DP_AUX_CH_MUTEX_ENABLE | > > > > > > + DP_AUX_CH_MUTEX_STATUS); > > > > > > +} > > > > > > + > > > > > > static int > > > > > > intel_dp_aux_ch(struct intel_dp *intel_dp, > > > > > > const uint8_t *send, int send_bytes, > > > > > > @@ -1115,6 +1154,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, > > > > > > > > > > > > intel_dp_check_edp(intel_dp); > > > > > > > > > > > > + if (!intel_dp_aux_ch_trylock(intel_dp)) { > > > > > > + ret = -EBUSY; > > > > > > + goto out_locked; > > > > > > + } > > > > > > + > > > > > > /* Try to wait for any previous AUX channel activity */ > > > > > > for (try = 0; try < 3; try++) { > > > > > > status = I915_READ_NOTRACE(ch_ctl); > > > > > > @@ -1244,6 +1288,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, > > > > > > > > > > > > ret = recv_bytes; > > > > > > out: > > > > > > + intel_dp_aux_ch_unlock(intel_dp); > > > > > > +out_locked: > > > > > > pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE); > > > > > > > > > > > > if (vdd) > > > > > > @@ -1496,6 +1542,10 @@ static void intel_aux_reg_init(struct intel_dp *intel_dp) > > > > > > intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port); > > > > > > for (i = 0; i < ARRAY_SIZE(intel_dp->aux_ch_data_reg); i++) > > > > > > intel_dp->aux_ch_data_reg[i] = intel_aux_data_reg(dev_priv, port, i); > > > > > > + if (INTEL_INFO(dev_priv)->gen >= 9) { > > > > > > + intel_dp->aux_ch_mutex_reg = DP_AUX_CH_MUTEX(port); > > > > > > + I915_WRITE(intel_dp->aux_ch_mutex_reg, DP_AUX_CH_MUTEX_ENABLE); > > > > > > + } > > > > > > } > > > > > > > > > > > > static void > > > > > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h > > > > > > index 50874f4035cf..0c88657d6066 100644 > > > > > > --- a/drivers/gpu/drm/i915/intel_drv.h > > > > > > +++ b/drivers/gpu/drm/i915/intel_drv.h > > > > > > @@ -1043,6 +1043,7 @@ struct intel_dp { > > > > > > i915_reg_t output_reg; > > > > > > i915_reg_t aux_ch_ctl_reg; > > > > > > i915_reg_t aux_ch_data_reg[5]; > > > > > > + i915_reg_t aux_ch_mutex_reg; > > > > > > uint32_t DP; > > > > > > int link_rate; > > > > > > uint8_t lane_count; > > > > > > -- > > > > > > 2.16.2 > > > > > > > > > > > > _______________________________________________ > > > > > > Intel-gfx mailing list > > > > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > > > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > > > > > > > > > -- > > > > > Ville Syrjälä > > > > > Intel OTC > > > > _______________________________________________ > > > > Intel-gfx mailing list > > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > _______________________________________________ > > Intel-gfx mailing list > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
