Re: [PATCH 26/43] drm/i915: Define Intel HDCP2.2 registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 14, 2018 at 07:43:41PM +0530, Ramalingam C wrote:
> Intel HDCP2.2 registers are defined with addr offsets and bit details.
> 
> Macros are defined for referencing the register offsets based on the
> port index.
> 
> Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h | 120 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 120 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index f6afa5e5e7c1..6a57b12d8dab 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2268,6 +2268,126 @@ enum i915_power_well_id {
>  				   _PORT_TX_DW14_LN0_C) +		\
>  	      _BXT_LANE_OFFSET(lane))
>  
> +/*
> + *HDCP Registers
> + **/

Do you need a new section for these? Just stick them with the existing HDCP
registers.

> +
> +/*
> + * HW register offsets are incresing in the order of B, C, D, A, F, E.
> + * But enum value increses in the order of A, B, C, D, E, F.
> + * So port numbers are adjusted for offset calculations.
> + */
> +#define HDCP_PORT_INDEX_ADJUST(p)	(((p) == PORT_A ? PORT_E : \
> +						(p) == PORT_E ? (0x6) : \
> +						(p)) - 1)
> +#define _MMIO_HDCP_PORT(p, a, b)	_MMIO_PORT(HDCP_PORT_INDEX_ADJUST(p), \
> +						a, b)

Can you do this the same was as I did _PORT_HDCP_AUTHENC, with _PICK? Then you
aren't limited to just ports a and b (and you don't need the arithmatic above.

> +
> +
> +/* RO Registers for I915. Programmable from FW(ME) only */
> +#define HDCP2_AUTH_DDI_A		0x66898
> +#define HDCP2_AUTH_DDI_B		0x66598
> +#define HDCP2_AUTH_DDI_C		0x66698
> +#define HDCP2_AUTH_DDI_D		0x66798
> +#define HDCP2_AUTH_DDI_E		0x66A98
> +#define HDCP2_AUTH_DDI_F		0x66998
> +#define   AUTH_LINK_AUTHENTICATED	(1 << 31)
> +#define   AUTH_LINK_TYPE		(1 << 30)
> +#define   AUTH_FORCE_CLR_INPUTCTR	(1 << 19)
> +#define   AUTH_CLR_KEYS			(1 << 18)
> +
> +#define HDCP2_AUTH_DDI(port)		_MMIO_HDCP_PORT(port, \
> +							HDCP2_AUTH_DDI_B, \
> +							HDCP2_AUTH_DDI_C)
> +
> +
> +/* Multi stream DP registers */
> +/* RO Registers for I915. Programmable from FW(ME) only */
> +#define HDCP2_AUTH_STREAM_A		0x66F00
> +#define HDCP2_AUTH_STREAM_B		0x66F04
> +#define HDCP2_AUTH_STREAM_C		0x66F08
> +#define HDCP2_AUTH_STREAM_D		0x66F0C
> +#define   AUTH_STREAM_TYPE		(1 << 31)
> +
> +#define HDCP2_AUTH_STREAM(stream)	_MMIO_PORT(stream, \
> +						   HDCP2_AUTH_STREAM_A, \
> +						   HDCP2_AUTH_STREAM_B)
> +
> +/* RW Registers for I915 */
> +#define HDCP2_CTL_DDI_A			0x668B0
> +#define HDCP2_CTL_DDI_B			0x665B0
> +#define HDCP2_CTL_DDI_C			0x666B0
> +#define HDCP2_CTL_DDI_D			0x667B0
> +#define HDCP2_CTL_DDI_E			0x66AB0
> +#define HDCP2_CTL_DDI_F			0x669B0
> +#define   CTL_LINK_ENCRYPTION_REQ	(1 << 31)
> +#define   CTL_VBID_TYPE_SELECT_SHIFT	29
> +#define   CTL_VBID_TYPE_SELECT_MASK	(3 << CTL_VBID_TYPE_SELECT_SHIFT)
> +
> +#define HDCP2_CTR_DDI(port)		_MMIO_HDCP_PORT(port, HDCP2_CTL_DDI_B, \
> +							HDCP2_CTL_DDI_C)
> +
> +/* RO only. For Debug purpose */
> +#define HDCP2_INPUTCTR_DDI_A		0x668B8
> +#define HDCP2_INPUTCTR_DDI_B		0x665B8
> +#define HDCP2_INPUTCTR_DDI_C		0x666B8
> +#define HDCP2_INPUTCTR_DDI_D		0x667B8
> +#define HDCP2_INPUTCTR_DDI_E		0x66AB8
> +#define HDCP2_INPUTCTR_DDI_F		0x669B8
> +
> +#define HDCP2_INPUTCTR_LO_DDI(port)	_MMIO_HDCP_PORT(port, \
> +							HDCP2_INPUTCTL_DDI_B, \
> +							HDCP2_INPUTCTL_DDI_C)
> +
> +#define HDCP2_INPUTCTR_HI_DDI(port)	_MMIO_HDCP_PORT(port, \
> +						(HDCP2_INPUTCTL_DDI_B + 4), \
> +						(HDCP2_INPUTCTL_DDI_C + 4))
> +
> +/* RO Registers for I915. Programmable from FW(ME) only */
> +#define HDCP2_RIV_DDI_A			0x66890
> +#define HDCP2_RIV_DDI_B			0x66590
> +#define HDCP2_RIV_DDI_C			0x66690
> +#define HDCP2_RIV_DDI_D			0x66790
> +#define HDCP2_RIV_DDI_E			0x66A90
> +#define HDCP2_RIV_DDI_F			0x66990
> +
> +#define HDCP2_RIV_LO_DDI(port)		_MMIO_HDCP_PORT(port, HDCP2_RIV_DDI_B, \
> +							HDCP2_RIV_DDI_C)
> +
> +#define HDCP2_RIV_HI_DDI(port)		_MMIO_HDCP_PORT(port, \
> +							(HDCP2_RIV_DDI_B + 4), \
> +							(HDCP2_RIV_DDI_C + 4))
> +
> +/* RO only. For Debug purpose */
> +#define HDCP2_STATUS_DDI_A		0x668B4
> +#define HDCP2_STATUS_DDI_B		0x665B4
> +#define HDCP2_STATUS_DDI_C		0x666B4
> +#define HDCP2_STATUS_DDI_D		0x667B4
> +#define HDCP2_STATUS_DDI_E		0x66AB4
> +#define HDCP2_STATUS_DDI_F		0x669B4
> +#define   STREAM_ENCRYPTION_STATUS_A	(1 << 31)
> +#define   STREAM_ENCRYPTION_STATUS_B	(1 << 30)
> +#define   STREAM_ENCRYPTION_STATUS_C	(1 << 29)
> +#define   LINK_TYPE_STATUS		(1 << 22)
> +#define   LINK_AUTH_STATUS		(1 << 21)
> +#define   LINK_ENCRYPTION_STATUS	(1 << 20)
> +
> +#define HDCP2_STATUS_DDI(port)		_MMIO_HDCP_PORT(port, \
> +							HDCP2_STATUS_DDI_B, \
> +							HDCP2_STATUS_DDI_C)
> +
> +/* RO only. For Debug purpose */
> +#define HDCP2_STREAM_STATUS_A		0x668C0
> +#define HDCP2_STREAM_STATUS_B		0x665C0
> +#define HDCP2_STREAM_STATUS_C		0x666C0
> +#define HDCP2_STREAM_STATUS_D		0x667C0
> +#define   STREAM_ENCRYPTION_STATUS	(1 << 31)
> +#define   STREAM_TYPE_STATUS		(1 << 30)
> +
> +#define HDCP2_STREAM_STATUS(stream)	_MMIO_HDCP_PORT(stream, \
> +							HDCP2_STREAM_STATUS_B, \
> +							HDCP2_STREAM_STATUS_C)
> +
>  /* UAIMI scratch pad register 1 */
>  #define UAIMI_SPR1			_MMIO(0x4F074)
>  /* SKL VccIO mask */
> -- 
> 2.7.4
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux