On Wed, 2018-01-17 at 21:21 +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> The LG 4k TV I have doesn't deassert HPD when I turn the TV off, but
> when I turn it back on it will pulse the HPD line. By that time it has
> forgotten everything we told it about scrambling and the clock ratio.
> Hence if we want to get a picture out if it again we have to tell it
> whether we're currently sending scrambled data or not. Implement
> that via the encoder->hotplug() hook.
>
> v2: Force a full modeset to not follow the HDMI 2.0 spec more
> closely (Shashank)
>
> Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 146
> ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 145 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 1aeae3e97013..25793bdc692f 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -25,6 +25,7 @@
> *
> */
>
> +#include <drm/drm_scdc_helper.h>
> #include "i915_drv.h"
> #include "intel_drv.h"
>
> @@ -2756,6 +2757,146 @@ intel_ddi_init_dp_connector(struct intel_digital_port
> *intel_dig_port)
> return connector;
> }
>
> +static int modeset_pipe(struct drm_crtc *crtc,
> + struct drm_modeset_acquire_ctx *ctx)
> +{
> + struct drm_atomic_state *state;
> + struct drm_crtc_state *crtc_state;
> + int ret;
> +
> + state = drm_atomic_state_alloc(crtc->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + state->acquire_ctx = ctx;
> +
> + crtc_state = drm_atomic_get_crtc_state(state, crtc);
> + if (IS_ERR(crtc_state)) {
> + ret = PTR_ERR(crtc_state);
> + goto out;
> + }
> +
> + crtc_state->mode_changed = true;
> +
> + ret = drm_atomic_add_affected_connectors(state, crtc);
> + if (ret)
> + goto out;
> +
> + ret = drm_atomic_add_affected_planes(state, crtc);
> + if (ret)
> + goto out;
> +
> + ret = drm_atomic_commit(state);
> + if (ret)
> + goto out;
> +
> + return 0;
> +
> + out:
> + drm_atomic_state_put(state);
> +
> + return ret;
> +}
> +
> +static int intel_hdmi_reset_link(struct intel_encoder *encoder,
> + struct drm_modeset_acquire_ctx *ctx)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_hdmi *hdmi = enc_to_intel_hdmi(&encoder->base);
> + struct intel_connector *connector = hdmi->attached_connector;
> + struct i2c_adapter *adapter =
> + intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
> + struct drm_connector_state *conn_state;
> + struct intel_crtc_state *crtc_state;
> + struct intel_crtc *crtc;
> + u8 config;
> + int ret;
> +
> + if (!connector || connector->base.status !=
> connector_status_connected)
> + return 0;
> +
> + ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
> ctx);
> + if (ret)
> + return ret;
> +
> + conn_state = connector->base.state;
> +
> + crtc = to_intel_crtc(conn_state->crtc);
> + if (!crtc)
> + return 0;
> +
> + ret = drm_modeset_lock(&crtc->base.mutex, ctx);
> + if (ret)
> + return ret;
> +
> + crtc_state = to_intel_crtc_state(crtc->base.state);
> +
> + WARN_ON(!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI));
> +
> + if (!crtc_state->base.active)
> + return 0;
> +
> + if (!crtc_state->hdmi_high_tmds_clock_ratio &&
> + !crtc_state->hdmi_scrambling)
> + return 0;
> +
> + if (conn_state->commit &&
> + !try_wait_for_completion(&conn_state->commit->hw_done))
> + return 0;
Probably should make a helper function for this since we use this in both DP and
HDMI codepaths
> +
> + ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
> + if (ret < 0) {
> + DRM_ERROR("Failed to read TMDS config: %d\n", ret);
> + return 0;
> + }
> +
> + if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) ==
> + crtc_state->hdmi_high_tmds_clock_ratio &&
> + !!(config & SCDC_SCRAMBLING_ENABLE) ==
> + crtc_state->hdmi_scrambling)
> + return 0;
> +
> + /*
> + * HDMI 2.0 says that one should not send scrambled data
> + * prior to configuring the sink scrambling, and that
> + * TMDS clock/data transmission should be suspended when
> + * changing the TMDS clock rate in the sink. So let's
> + * just do a full modeset here, even though some sinks
> + * would be perfectly happy if were to just reconfigure
> + * the SCDC settings on the fly.
> + */
> + return modeset_pipe(&crtc->base, ctx);
> +}
> +
> +static bool intel_ddi_hotplug(struct intel_encoder *encoder,
> + struct intel_connector *connector)
> +{
> + struct drm_modeset_acquire_ctx ctx;
> + bool changed;
> + int ret;
> +
> + changed = intel_encoder_hotplug(encoder, connector);
> +
> + drm_modeset_acquire_init(&ctx, 0);
> +
> + for (;;) {
> + ret = intel_hdmi_reset_link(encoder, &ctx);
> +
> + if (ret == -EDEADLK) {
> + drm_modeset_backoff(&ctx);
> + continue;
> + }
> +
> + break;
> + }
> +
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
> + WARN(ret, "Acquiring modeset locks failed with %i\n", ret);
> +
> + return changed;
> +}
> +
> static struct intel_connector *
> intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port)
> {
> @@ -2866,7 +3007,10 @@ void intel_ddi_init(struct drm_i915_private *dev_priv,
> enum port port)
> drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
> DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
>
> - intel_encoder->hotplug = intel_encoder_hotplug;
> + if (init_hdmi)
> + intel_encoder->hotplug = intel_ddi_hotplug;
> + else
> + intel_encoder->hotplug = intel_encoder_hotplug;
> intel_encoder->compute_output_type = intel_ddi_compute_output_type;
> intel_encoder->compute_config = intel_ddi_compute_config;
> intel_encoder->enable = intel_enable_ddi;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
