On Tue, Jan 23, 2018 at 05:05:22PM -0200, Paulo Zanoni wrote:
> This code is similar enough to the CNL code that I considered just
> adding ICL support to the CNL function, but I think it's still
> different enough, and having a function specific to ICL allows us to
> more easily adapt code in case the spec changes more later.
>
> We're still missing the power wells and the mbus code, so leave those
> pieces with a FIXME comment while they're not here yet.
>
> v2: Don't use _PICK, don't WARN_ON(1), don't forget the chicken bits.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Reviewed-by: James Ausmus <james.ausmus@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 16 ++++++-
> drivers/gpu/drm/i915/intel_runtime_pm.c | 82 ++++++++++++++++++++++++++++++++-
> 2 files changed, 94 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index ebf6261d30fd..979bc06a59f4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1904,6 +1904,11 @@ enum i915_power_well_id {
> #define CL_POWER_DOWN_ENABLE (1 << 4)
> #define SUS_CLOCK_CONFIG (3 << 0)
>
> +#define _ICL_PORT_CL_DW5_A 0x162014
> +#define _ICL_PORT_CL_DW5_B 0x6C014
> +#define ICL_PORT_CL_DW5(port) _MMIO((port == PORT_A) ? \
> + _ICL_PORT_CL_DW5_A : _ICL_PORT_CL_DW5_B)
> +
> #define _PORT_CL1CM_DW9_A 0x162024
> #define _PORT_CL1CM_DW9_BC 0x6C024
> #define IREF0RC_OFFSET_SHIFT 8
> @@ -7126,8 +7131,9 @@ enum {
> #define RESET_PCH_HANDSHAKE_ENABLE (1<<4)
>
> #define GEN8_CHICKEN_DCPR_1 _MMIO(0x46430)
> -#define SKL_SELECT_ALTERNATE_DC_EXIT (1<<30)
> -#define MASK_WAKEMEM (1<<13)
> +#define SKL_SELECT_ALTERNATE_DC_EXIT (1 << 30)
> +#define MASK_WAKEMEM (1 << 13)
> +#define CNL_DDI_CLOCK_REG_ACCESS_ON (1 << 7)
>
> #define SKL_DFSM _MMIO(0x51000)
> #define SKL_DFSM_CDCLK_LIMIT_MASK (3 << 23)
> @@ -9696,4 +9702,10 @@ enum skl_power_gate {
> #define MMCD_PCLA (1 << 31)
> #define MMCD_HOTSPOT_EN (1 << 27)
>
> +#define _ICL_PHY_MISC_A 0x64C00
> +#define _ICL_PHY_MISC_B 0x64C04
> +#define ICL_PHY_MISC(port) _MMIO((port == PORT_A) ? \
> + _ICL_PHY_MISC_A : _ICL_PHY_MISC_B)
> +#define ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN (1 << 23)
> +
> #endif /* _I915_REG_H_ */
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 73dd525d241a..2556db16c76a 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -2882,6 +2882,80 @@ static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
> I915_WRITE(CHICKEN_MISC_2, val);
> }
>
> +static void icl_display_core_init(struct drm_i915_private *dev_priv,
> + bool resume)
> +{
> + enum port port;
> + u32 val;
> +
> + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> +
> + /* 1. Enable PCH reset handshake. */
> + val = I915_READ(HSW_NDE_RSTWRN_OPT);
> + val |= RESET_PCH_HANDSHAKE_ENABLE;
> + I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +
> + for (port = PORT_A; port <= PORT_B; port++) {
> + /* 2. Enable DDI combo PHY comp. */
> + val = I915_READ(ICL_PHY_MISC(port));
> + val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> + I915_WRITE(ICL_PHY_MISC(port), val);
> +
> + cnl_set_procmon_ref_values(dev_priv, port);
> +
> + val = I915_READ(ICL_PORT_COMP_DW0(port));
> + val |= COMP_INIT;
> + I915_WRITE(ICL_PORT_COMP_DW0(port), val);
> +
> + /* 3. Set power down enable. */
> + val = I915_READ(ICL_PORT_CL_DW5(port));
> + val |= CL_POWER_DOWN_ENABLE;
> + I915_WRITE(ICL_PORT_CL_DW5(port), val);
> + }
> +
> + /* 4. Enable power well 1 (PG1) and aux IO power. */
> + /* FIXME: ICL power wells code not here yet. */
> +
> + /* 5. Enable CDCLK. */
> + icl_init_cdclk(dev_priv);
> +
> + /* 6. Enable DBUF. */
> + gen9_dbuf_enable(dev_priv);
> +
> + /* 7. Setup MBUS. */
> + /* FIXME: MBUS code not here yet. */
> +
> + /* 8. CHICKEN_DCPR_1 */
> + I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
> + CNL_DDI_CLOCK_REG_ACCESS_ON);
> +}
> +
> +static void icl_display_core_uninit(struct drm_i915_private *dev_priv)
> +{
> + enum port port;
> + u32 val;
> +
> + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> +
> + /* 1. Disable all display engine functions -> aready done */
> +
> + /* 2. Disable DBUF */
> + gen9_dbuf_disable(dev_priv);
> +
> + /* 3. Disable CD clock */
> + icl_uninit_cdclk(dev_priv);
> +
> + /* 4. Disable Power Well 1 (PG1) and Aux IO Power */
> + /* FIXME: ICL power wells code not here yet. */
> +
> + /* 5. Disable Comp */
> + for (port = PORT_A; port <= PORT_B; port++) {
> + val = I915_READ(ICL_PHY_MISC(port));
> + val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> + I915_WRITE(ICL_PHY_MISC(port), val);
> + }
> +}
> +
> static void chv_phy_control_init(struct drm_i915_private *dev_priv)
> {
> struct i915_power_well *cmn_bc =
> @@ -3014,7 +3088,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
>
> power_domains->initializing = true;
>
> - if (IS_CANNONLAKE(dev_priv)) {
> + if (IS_ICELAKE(dev_priv)) {
> + icl_display_core_init(dev_priv, resume);
> + } else if (IS_CANNONLAKE(dev_priv)) {
> cnl_display_core_init(dev_priv, resume);
> } else if (IS_GEN9_BC(dev_priv)) {
> skl_display_core_init(dev_priv, resume);
> @@ -3055,7 +3131,9 @@ void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
> if (!i915_modparams.disable_power_well)
> intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
>
> - if (IS_CANNONLAKE(dev_priv))
> + if (IS_ICELAKE(dev_priv))
> + icl_display_core_uninit(dev_priv);
> + else if (IS_CANNONLAKE(dev_priv))
> cnl_display_core_uninit(dev_priv);
> else if (IS_GEN9_BC(dev_priv))
> skl_display_core_uninit(dev_priv);
> --
> 2.14.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
