Em Ter, 2018-01-23 às 16:32 -0800, James Ausmus escreveu:
> On Tue, Jan 23, 2018 at 05:05:21PM -0200, Paulo Zanoni wrote:
> > On ICL we have two sets of registers: one for port A and another
> > for
> > port B. The set of port A registers is the same as the CNL
> > registers.
> >
> > Since the procmon table on ICL is the same we want to reuse the CNL
> > function. To do that we add a port argument and make CNL always
> > call
> > the function passing port A. This way, we'll be able to easily
> > reuse
> > the function on ICL when we add icl_display_core_init().
> >
> > v2: Don't use _PICK() when you can use a ternary operator.
> >
> > Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 26
> > ++++++++++++++++++++++++++
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 21 ++++++++++++++-------
> > 2 files changed, 40 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index d72e206b2b9f..ebf6261d30fd 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -2102,6 +2102,32 @@ enum i915_power_well_id {
> > #define CNL_PORT_COMP_DW9 _MMIO(0x162124)
> > #define CNL_PORT_COMP_DW10 _MMIO(0x162128)
> >
> > +#define _ICL_PORT_COMP_DW0_A 0x162100
> > +#define _ICL_PORT_COMP_DW0_B 0x6C100
> > +#define ICL_PORT_COMP_DW0(port) _MMIO((port ==
> > PORT_A) ? \
> > + _ICL_PORT_COMP_DW0_A
> > : \
> > + _ICL_PORT_COMP_DW0_B
> > )
> > +#define _ICL_PORT_COMP_DW1_A 0x162104
> > +#define _ICL_PORT_COMP_DW1_B 0x6C104
> > +#define ICL_PORT_COMP_DW1(port) _MMIO((port ==
> > PORT_A) ? \
> > + _ICL_PORT_COMP_DW1_A
> > : \
> > + _ICL_PORT_COMP_DW1_B
> > )
> > +#define _ICL_PORT_COMP_DW3_A 0x16210C
> > +#define _ICL_PORT_COMP_DW3_B 0x6C10C
> > +#define ICL_PORT_COMP_DW3(port) _MMIO((port ==
> > PORT_A) ? \
> > + _ICL_PORT_COMP_DW3_A
> > : \
> > + _ICL_PORT_COMP_DW3_B
> > )
> > +#define _ICL_PORT_COMP_DW9_A 0x162124
> > +#define _ICL_PORT_COMP_DW9_B 0x6C124
> > +#define ICL_PORT_COMP_DW9(port) _MMIO((port ==
> > PORT_A) ? \
> > + _ICL_PORT_COMP_DW9_A
> > : \
> > + _ICL_PORT_COMP_DW9_B
> > )
> > +#define _ICL_PORT_COMP_DW10_A 0x162128
> > +#define _ICL_PORT_COMP_DW10_B 0x6C128
> > +#define ICL_PORT_COMP_DW10(port) _MMIO((port == PORT_A) ?
> > \
> > + _ICL_PORT_COMP_DW10_
> > A : \
> > + _ICL_PORT_COMP_DW10_
> > B)
> > +
> > /* BXT PHY Ref registers */
> > #define _PORT_REF_DW3_A 0x16218C
> > #define _PORT_REF_DW3_BC 0x6C18C
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index 5b1aa4b9c72c..73dd525d241a 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -2758,12 +2758,19 @@ static const struct cnl_procmon {
> > { .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 =
> > 0x8AE38FF1, },
> > };
> >
> > -static void cnl_set_procmon_ref_values(struct drm_i915_private
> > *dev_priv)
> > +/*
> > + * CNL has just one set of registers, while ICL has two sets: one
> > for port A and
> > + * the other for port B. The CNL registers are equivalent to the
> > ICL port A
> > + * registers, that's why we call the ICL macros even though the
> > function has CNL
> > + * on its name.
> > + */
My reply below refers to this comment here ^.
> > +static void cnl_set_procmon_ref_values(struct drm_i915_private
> > *dev_priv,
> > + enum port port)
> > {
> > const struct cnl_procmon *procmon;
> > u32 val;
> >
> > - val = I915_READ(CNL_PORT_COMP_DW3);
> > + val = I915_READ(ICL_PORT_COMP_DW3(port));
> > switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
> > default:
> > MISSING_CASE(val);
> > @@ -2784,13 +2791,13 @@ static void
> > cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv)
> > break;
> > }
> >
> > - val = I915_READ(CNL_PORT_COMP_DW1);
> > + val = I915_READ(ICL_PORT_COMP_DW1(port));
> > val &= ~((0xff << 16) | 0xff);
> > val |= procmon->dw1;
> > - I915_WRITE(CNL_PORT_COMP_DW1, val);
> > + I915_WRITE(ICL_PORT_COMP_DW1(port), val);
> >
> > - I915_WRITE(CNL_PORT_COMP_DW9, procmon->dw9);
> > - I915_WRITE(CNL_PORT_COMP_DW10, procmon->dw10);
> > + I915_WRITE(ICL_PORT_COMP_DW9(port), procmon->dw9);
> > + I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
> > }
> >
> > static void cnl_display_core_init(struct drm_i915_private
> > *dev_priv, bool resume)
> > @@ -2811,7 +2818,7 @@ static void cnl_display_core_init(struct
> > drm_i915_private *dev_priv, bool resume
> > val &= ~CNL_COMP_PWR_DOWN;
> > I915_WRITE(CHICKEN_MISC_2, val);
> >
> > - cnl_set_procmon_ref_values(dev_priv);
> > + cnl_set_procmon_ref_values(dev_priv, PORT_A);
>
> Maybe worth a one-line comment here about why we're passing PORT_A so
> drive-by readings don't get confused on why we're only setting
> PORT_A?
>
> Maybe something like
>
> /* Dummy PORT_A to get the correct CNL register from the ICL macro */
I put such comment at the beginning of the function. See above. Is that
enough or you think we also need this extra comment?
>
> Either way:
>
> Reviewed-by: James Ausmus <james.ausmus@xxxxxxxxx>
Thanks!
>
> >
> > val = I915_READ(CNL_PORT_COMP_DW0);
> > val |= COMP_INIT;
> > --
> > 2.14.3
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
