Re: [PATCH v2] drm/i915/edp: Do not do link training fallback or prune modes on EDP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 23, 2018 at 02:57:04PM +0200, Imre Deak wrote:
> On Tue, Jan 23, 2018 at 11:48:22AM +0200, Jani Nikula wrote:
> > On Mon, 22 Jan 2018, Imre Deak <imre.deak@xxxxxxxxx> wrote:
> > > On Fri, Jan 19, 2018 at 05:45:16PM +0200, Imre Deak wrote:
> > >> On Thu, Oct 12, 2017 at 12:13:38PM -0700, Manasi Navare wrote:
> > >> > In case of eDP because the panel has a fixed mode, the link rate
> > >> > and lane count at which it is trained corresponds to the link BW
> > >> > required to support the native resolution of the panel. In case of
> > >> > panles with lower resolutions where fewer lanes are hooked up internally,
> > >> > that number is reflected in the MAX_LANE_COUNT DPCD register of the panel.
> > >> > So it is pointless to fallback to lower link rate/lane count in case
> > >> > of link training failure on eDP connector since the lower link BW
> > >> > will not support the native resolution of the panel and we cannot
> > >> > prune the preferred mode on the eDP connector.
> > >> > 
> > >> > In case of Link training failure on the eDP panel, something is wrong
> > >> > in the HW internally and hence driver errors out with a loud
> > >> > and clear DRM_ERROR message.
> > >> > 
> > >> > v2:
> > >> > * Fix the DEBUG_ERROR and add {} in else (Ville Syrjala)
> > >> > 
> > >> > Cc: Clinton Taylor <clinton.a.taylor@xxxxxxxxx>
> > >> > Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
> > >> > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> > >> > Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> > >> > Cc: Dave Airlie <airlied@xxxxxxxxxx>
> > >> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > >> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > >> > Reviewed-by: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> > >> 
> > >> This fell through the cracks, looks like it partially fixes
> > >> https://bugs.freedesktop.org/show_bug.cgi?id=103369
> > >> 
> > >> Why link training fails there is not clear.
> > >
> > > Ok, the link training fail turned out to be a race between a modeset
> > > link training and a link retraining called from
> > > runtime_resume->intel_hpd_init->dp_detect. As Ville pointed out that
> > > one was fixed meanwhile by
> > >
> > > commit 42e5e65765265485ecf2a480c244d76c2c624449
> > > Author:     Daniel Vetter <daniel.vetter@xxxxxxxx>
> > > AuthorDate: Mon Nov 13 17:01:40 2017 +0100
> > > Commit:     Daniel Vetter <daniel.vetter@xxxxxxxx>
> > > CommitDate: Thu Nov 23 14:59:07 2017 +0100
> > >
> > >     drm/i915: sync dp link status checks against atomic commmits
> > >
> > > I merged now this fix to address the other issue, adding the above bug
> > > as reference. Thanks for the patch and the review.
> > 
> > Thanks for the follow-up... but should we have added a Fixes: or cc:
> > stable tag here?
> 
> Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link
> training failure")
> 
> I wasn't sure about stable, since for me the link training failure
> happened only due to the bug fixed by 42e5e65765265. In any case I can't
> see how it could cause problems, so yes let's Cc: stable too.
> 
> --Imre

Thanks for your feedback Imre and Jani.
This patch avoids fallback and modeset retry for link train failure on edp.
But lately we have seen a bunch of buggy panels that require just another modeset
at same link params to pass link training.
So one idea I had and as suggested by DK was that we try harder before failing on eDP.

So I was planning to add this code:
On eDP, if link train fails -> power cycle the panel -> Just call modeset retry function
without fallback -> send a uevent for modeset retry.

What do you think?

Manasi
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux