On Tue, Jan 23, 2018 at 05:05:23PM -0200, Paulo Zanoni wrote:
> From: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
>
> ICL has 2 slices of DBuf, enable both the slices during display init.
>
> Ideally we should only enable the second slice when needed in order to
> save power, but while we're not there yet, adopt the simpler solution
> to keep us bug-free.
>
> v2 (from Paulo):
> - Add the TODO comment.
> - Reorganize where things are defined.
> - Fix indentation.
> - Remove unnecessary POSTING_READ() calls.
> - Improve the commit message.
>
> Signed-off-by: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_runtime_pm.c | 34 +++++++++++++++++++++++++++++++--
> 2 files changed, 34 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 979bc06a59f4..1746df9a263d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7122,6 +7122,8 @@ enum {
> #define DISP_DATA_PARTITION_5_6 (1<<6)
> #define DISP_IPC_ENABLE (1<<3)
> #define DBUF_CTL _MMIO(0x45008)
> +#define DBUF_CTL_S1 _MMIO(0x45008)
Since it's the exact same register, is it really worth duplicating, or
should we just use the existing DBUF_CTL instead of adding DBUF_CTL_S1?
> +#define DBUF_CTL_S2 _MMIO(0x44FE8)
> #define DBUF_POWER_REQUEST (1<<31)
> #define DBUF_POWER_STATE (1<<30)
> #define GEN7_MSG_CTL _MMIO(0x45010)
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 2556db16c76a..7801a425398f 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -2610,6 +2610,36 @@ static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
> DRM_ERROR("DBuf power disable timeout!\n");
> }
>
> +/*
> + * TODO: we shouldn't always enable DBUF_CTL_S2, we should only enable it when
> + * needed and keep it disabled as much as possible.
> + */
> +static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
> +{
> + I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) | DBUF_POWER_REQUEST);
> + I915_WRITE(DBUF_CTL_S2, I915_READ(DBUF_CTL_S2) | DBUF_POWER_REQUEST);
> + POSTING_READ(DBUF_CTL_S2);
> +
> + udelay(10);
BSpec says to poll, and timeout/fail after 10 uS, rather than
unconditionally busy wait - worth making more complex to potentially
save a few uS of busy wait?
> +
> + if (!(I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) ||
> + !(I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE))
> + DRM_ERROR("DBuf power enable timeout\n");
> +}
> +
> +static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
> +{
> + I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) & ~DBUF_POWER_REQUEST);
> + I915_WRITE(DBUF_CTL_S2, I915_READ(DBUF_CTL_S2) & ~DBUF_POWER_REQUEST);
> + POSTING_READ(DBUF_CTL_S2);
> +
> + udelay(10);
> +
> + if ((I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) ||
> + (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE))
> + DRM_ERROR("DBuf power disable timeout!\n");
> +}
> +
> static void skl_display_core_init(struct drm_i915_private *dev_priv,
> bool resume)
> {
> @@ -2920,7 +2950,7 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
> icl_init_cdclk(dev_priv);
>
> /* 6. Enable DBUF. */
> - gen9_dbuf_enable(dev_priv);
> + icl_dbuf_enable(dev_priv);
>
> /* 7. Setup MBUS. */
> /* FIXME: MBUS code not here yet. */
> @@ -2940,7 +2970,7 @@ static void icl_display_core_uninit(struct drm_i915_private *dev_priv)
> /* 1. Disable all display engine functions -> aready done */
>
> /* 2. Disable DBUF */
> - gen9_dbuf_disable(dev_priv);
> + icl_dbuf_disable(dev_priv);
>
> /* 3. Disable CD clock */
> icl_uninit_cdclk(dev_priv);
> --
> 2.14.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
