Regards
Shashank
On 1/18/2018 3:00 PM, Maarten Lankhorst wrote:
Op 18-01-18 om 07:27 schreef Sharma, Shashank:
Regards
Shashank
On 1/17/2018 11:57 PM, Ville Syrjälä wrote:
On Fri, Jan 05, 2018 at 03:15:35PM +0530, Shashank Sharma wrote:
LSPCON chips can generate YCBCR outputs, if asked nicely :).
In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes
Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes
So for both 4:2:0 as well as 4:4:4 outputs, we are driving the
pipe for YCBCR 4:4:4 output, but AVI infoframe's color space
information indicates LSPCON FW to start scaling down from YCBCR
4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by
LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.
V2: rebase
V3: Addressed review comments from Ville
- add enum crtc_output_format instead of bool ycbcr420
- use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output
cases in this way we will have YCBCR 4:4:4 framework ready (except
the ABI part)
Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 2 ++
drivers/gpu/drm/i915/intel_ddi.c | 7 +++++++
drivers/gpu/drm/i915/intel_dp.c | 10 ++++++++++
drivers/gpu/drm/i915/intel_drv.h | 2 ++
drivers/gpu/drm/i915/intel_lspcon.c | 28 ++++++++++++++++++++++++++++
5 files changed, 49 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 966e4df..45ee264 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8547,6 +8547,8 @@ enum skl_power_gate {
#define TRANS_MSA_MISC(tran) _MMIO_TRANS2(tran, _TRANSA_MSA_MISC)
#define TRANS_MSA_SYNC_CLK (1<<0)
+#define TRANS_MSA_SAMPLING_444 (2<<1)
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
#define TRANS_MSA_6_BPC (0<<5)
#define TRANS_MSA_8_BPC (1<<5)
#define TRANS_MSA_10_BPC (2<<5)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 7b89f2a..7616f6f 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1499,6 +1499,13 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)
break;
}
+ /*
+ * As per DP 1.2 spec section 2.3.4.3 while sending
+ * YCBCR 444 signals we should program MSA MISC1/0 fields with
+ * colorspace information.
+ */
+ if (crtc_state->output_format == CRTC_OUTPUT_YCBCR444)
+ temp |= TRANS_MSA_SAMPLING_444 | TRANS_MSA_CLRSP_YCBCR;
This fails to state that we're indicating BT.601 encoding. I think we
should spell that out explicitly.
Agree, I will add this in comments.
I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 35c5299..3bf82ea 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1613,6 +1613,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ struct intel_lspcon *lspcon = enc_to_intel_lspcon(&encoder->base);
enum port port = encoder->port;
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
struct intel_connector *intel_connector = intel_dp->attached_connector;
@@ -1642,6 +1643,15 @@ intel_dp_compute_config(struct intel_encoder *encoder,
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
pipe_config->has_pch_encoder = true;
+ if (lspcon->active) {
+ struct drm_connector *connector = &intel_connector->base;
+
+ if (lspcon_ycbcr420_config(connector, pipe_config)) {
+ pipe_config->output_format = CRTC_OUTPUT_YCBCR444;
I think I'd like to see all compute_config hooks explicitly set the
outout_format (to RGB usually obviously).
That's the one I was talking about in previous patch. If we keep output_format_RGB = 0, we need
not to do this, as reset of the pipe_config will automatically make it RGB.
+ lspcon->output_format = CRTC_OUTPUT_YCBCR420;
You should not modify any non-atomic state like that in compute_config.
Please help me to understand this better, Can you elaborate a bit more on:
- Why is this a non-atomic state ?
Because lspcon->output_format is modified even if a commit is TEST_ONLY..
This will break if you do a nonblocking modeset vs TEST_ONLY, it could commit the wrong lspcon->output_format. :)
- What is the right place we should modify it ?
intel_digital_connector_state probably.
~Maarten
Thanks for the explanation Maarten, this was very helpful :-).
- Shashank
- Shashank
+ }
+ }
+
pipe_config->has_drrs = false;
if (IS_G4X(dev_priv) || port == PORT_A)
pipe_config->has_audio = false;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2de6b41..5edba06 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -2047,6 +2047,8 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,
const struct drm_connector_state *conn_state);
bool lspcon_infoframe_enabled(struct drm_encoder *encoder,
const struct intel_crtc_state *pipe_config);
+bool lspcon_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *config);
/* intel_pipe_crc.c */
int intel_pipe_crc_create(struct drm_minor *minor);
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 066ea91..cb88138 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -180,6 +180,25 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)
return true;
}
+bool lspcon_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *config)
+{
+ struct drm_display_info *info = &connector->display_info;
+ struct drm_display_mode *mode = &config->base.adjusted_mode;
+
+ if (drm_mode_is_420_only(info, mode)) {
+ if (!connector->ycbcr_420_allowed) {
+ DRM_ERROR("Platform doesn't support YCBCR420 output\n");
+ return false;
+ }
+
+ config->port_clock /= 2;
+ return true;
+ }
+
+ return false;
+}
+
static bool lspcon_probe(struct intel_lspcon *lspcon)
{
int retry;
@@ -459,6 +478,13 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,
return;
}
+ if (lspcon->output_format == CRTC_OUTPUT_YCBCR420)
+ frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
+ else if (lspcon->output_format == CRTC_OUTPUT_YCBCR444)
+ frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+ else
+ frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+
drm_hdmi_avi_infoframe_quant_range(&frame.avi, mode,
crtc_state->limited_color_range ?
HDMI_QUANTIZATION_RANGE_LIMITED :
@@ -512,6 +538,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
struct intel_lspcon *lspcon = &intel_dig_port->lspcon;
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_connector *connector = &dp->attached_connector->base;
if (!HAS_LSPCON(dev_priv)) {
DRM_ERROR("LSPCON is not supported on this platform\n");
@@ -536,6 +563,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
return false;
}
+ connector->ycbcr_420_allowed = true;
lspcon->active = true;
DRM_DEBUG_KMS("Success: LSPCON init\n");
return true;
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
