From: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
ICP, like BXT, has has two panel power sequencers.
v2: Simplify the code. Remove unwanted register definitions.
Make code as close to BXT style as possible. (Ville)
Also, remove the use of ICP_SECOND_PPS_BACKLIGHT for now.
Moving forward, if we are sure we need to set this register,
we can access it.
v3: Use INTEL_GEN(dev_priv), make code more readeable. (Ville)
v4 (from Paulo):
- Coding style fixes.
- Add a missing HAS_PCH_CNP -> gen10+ check.
- Rebase.
v5: Use per platform checks rather than INTEL_GEN().
v4 of this patch breaks on CoffeeLake, since CFL uses
CNP and per platform check makes sense in that case.
v6 (from Paulo):
- v5 was a patch on top of v4, not a new version. Now v6 is correctly
a new version of the original patch.
Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 46937a8c48cc..cdfdacf27939 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -796,7 +796,8 @@ static void intel_pps_get_registers(struct intel_dp *intel_dp,
regs->pp_stat = PP_STATUS(pps_idx);
regs->pp_on = PP_ON_DELAYS(pps_idx);
regs->pp_off = PP_OFF_DELAYS(pps_idx);
- if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv))
+ if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv) &&
+ !HAS_PCH_ICP(dev_priv))
regs->pp_div = PP_DIVISOR(pps_idx);
}
@@ -5453,7 +5454,8 @@ intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
pp_on = I915_READ(regs.pp_on);
pp_off = I915_READ(regs.pp_off);
- if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv)) {
+ if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv) &&
+ !HAS_PCH_ICP(dev_priv)) {
I915_WRITE(regs.pp_ctrl, pp_ctl);
pp_div = I915_READ(regs.pp_div);
}
@@ -5471,7 +5473,8 @@ intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
seq->t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
PANEL_POWER_DOWN_DELAY_SHIFT;
- if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
+ if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+ HAS_PCH_ICP(dev_priv)) {
seq->t11_t12 = ((pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
BXT_POWER_CYCLE_DELAY_SHIFT) * 1000;
} else {
@@ -5642,7 +5645,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
(seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
- if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
+ if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+ HAS_PCH_ICP(dev_priv)) {
pp_div = I915_READ(regs.pp_ctrl);
pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
@@ -5668,7 +5672,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
I915_WRITE(regs.pp_on, pp_on);
I915_WRITE(regs.pp_off, pp_off);
- if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
+ if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+ HAS_PCH_ICP(dev_priv))
I915_WRITE(regs.pp_ctrl, pp_div);
else
I915_WRITE(regs.pp_div, pp_div);
@@ -5676,7 +5681,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
I915_READ(regs.pp_on),
I915_READ(regs.pp_off),
- (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) ?
+ (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+ HAS_PCH_ICP(dev_priv)) ?
(I915_READ(regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK) :
I915_READ(regs.pp_div));
}
--
2.14.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
