[PATCH v5 5/9] drm/i915: Add HDCP framework + base implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds the framework required to add HDCP support to intel
connectors. It implements Aksv loading from fuse, and parts 1/2/3
of the HDCP authentication scheme.

Note that without shim implementations, this does not actually implement
HDCP. That will come in subsequent patches.

Changes in v2:
- Don't open code wait_fors (Chris)
- drm_hdcp.c under MIT license (Daniel)
- Move intel_hdcp_disable() call above ddi_disable (Ram)
- Fix // comments (I wore a cone of shame for 12 hours to atone) (Daniel)
- Justify intel_hdcp_shim with comments (Daniel)
- Fixed async locking issues by adding hdcp_mutex (Daniel)
- Don't alter connector_state in enable/disable (Daniel)
Changes in v3:
- Added hdcp_mutex/hdcp_value to make async reasonable
- Added hdcp_prop_work to separate link checking & property setting
- Added new helper for atomic_check state tracking (Daniel)
- Moved enable/disable into atomic_commit with matching helpers
- Moved intel_hdcp_check_link out of all locks when called from dp
- Bumped up ksv_fifo timeout (noticed failure on one of my dongles)
Changes in v4:
- Remove SKL_ prefix from most register names (Daniel)
- Move enable/disable back to modeset path (Daniel)
- s/get_random_long/get_random_u32/ (Daniel)
- Remove mode_config.mutex lock in prop_work (Daniel)
- Add intel_hdcp_init to handle init of conn components (Daniel)
- Actually check return value of attach_property
- Check Bksv is valid before trying to authenticate (Ram)
Changes in v5:
- checkpatch whitespace changes
- s/DRM_MODE_CONTENT_PROTECTION_OFF/DRM_MODE_CONTENT_PROTECTION_UNDESIRED/
- Fix ksv list wait timeout (actually wait 5s)
- Increase the R0 timeout to 300ms (Ram)

Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Ramalingam C <ramalingm.c@xxxxxxxxx>
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/Makefile        |   1 +
 drivers/gpu/drm/i915/i915_reg.h      |  83 ++++
 drivers/gpu/drm/i915/intel_atomic.c  |   2 +
 drivers/gpu/drm/i915/intel_ddi.c     |   7 +
 drivers/gpu/drm/i915/intel_display.c |   4 +
 drivers/gpu/drm/i915/intel_drv.h     |  85 ++++
 drivers/gpu/drm/i915/intel_hdcp.c    | 740 +++++++++++++++++++++++++++++++++++
 7 files changed, 922 insertions(+)
 create mode 100644 drivers/gpu/drm/i915/intel_hdcp.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 4d9e2f855e9d..3bddd8a06806 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -109,6 +109,7 @@ i915-y += intel_audio.o \
 	  intel_fbc.o \
 	  intel_fifo_underrun.o \
 	  intel_frontbuffer.o \
+	  intel_hdcp.o \
 	  intel_hotplug.o \
 	  intel_modes.o \
 	  intel_overlay.o \
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 505c605eff98..5db8d18c73ab 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8046,6 +8046,7 @@ enum {
 #define     GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
 #define     GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT	16
 #define     GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT	24
+#define   SKL_PCODE_LOAD_HDCP_KEYS		0x5
 #define   SKL_PCODE_CDCLK_CONTROL		0x7
 #define     SKL_CDCLK_PREPARE_FOR_CHANGE	0x3
 #define     SKL_CDCLK_READY_FOR_CHANGE		0x1
@@ -8348,6 +8349,88 @@ enum skl_power_gate {
 #define  SKL_PW_TO_PG(pw)			((pw) - SKL_DISP_PW_1 + SKL_PG1)
 #define  SKL_FUSE_PG_DIST_STATUS(pg)		(1 << (27 - (pg)))
 
+
+/* HDCP Key Registers */
+#define HDCP_KEY_CONF		_MMIO(0x66c00)
+#define  HDCP_AKSV_SEND_TRIGGER		BIT(31)
+#define  HDCP_CLEAR_KEYS_TRIGGER	BIT(30)
+#define HDCP_KEY_STATUS		_MMIO(0x66c04)
+#define  HDCP_FUSE_IN_PROGRESS	BIT(7)
+#define  HDCP_FUSE_ERROR		BIT(6)
+#define  HDCP_FUSE_DONE		BIT(5)
+#define  HDCP_KEY_LOAD_STATUS	BIT(1)
+#define  HDCP_KEY_LOAD_DONE		BIT(0)
+#define HDCP_AKSV_LO		_MMIO(0x66c10)
+#define HDCP_AKSV_HI		_MMIO(0x66c14)
+
+/* HDCP Repeater Registers */
+#define HDCP_REP_CTL		_MMIO(0x66d00)
+#define  HDCP_DDIB_REP_PRESENT	BIT(30)
+#define  HDCP_DDIA_REP_PRESENT	BIT(29)
+#define  HDCP_DDIC_REP_PRESENT	BIT(28)
+#define  HDCP_DDID_REP_PRESENT	BIT(27)
+#define  HDCP_DDIF_REP_PRESENT	BIT(26)
+#define  HDCP_DDIE_REP_PRESENT	BIT(25)
+#define  HDCP_DDIB_SHA1_M0		(1 << 20)
+#define  HDCP_DDIA_SHA1_M0		(2 << 20)
+#define  HDCP_DDIC_SHA1_M0		(3 << 20)
+#define  HDCP_DDID_SHA1_M0		(4 << 20)
+#define  HDCP_DDIF_SHA1_M0		(5 << 20)
+#define  HDCP_DDIE_SHA1_M0		(6 << 20) /* Bspec says 5? */
+#define  HDCP_SHA1_BUSY		BIT(16)
+#define  HDCP_SHA1_READY		BIT(17)
+#define  HDCP_SHA1_COMPLETE		BIT(18)
+#define  HDCP_SHA1_V_MATCH		BIT(19)
+#define  HDCP_SHA1_TEXT_32		(1 << 1)
+#define  HDCP_SHA1_COMPLETE_HASH	(2 << 1)
+#define  HDCP_SHA1_TEXT_24		(4 << 1)
+#define  HDCP_SHA1_TEXT_16		(5 << 1)
+#define  HDCP_SHA1_TEXT_8		(6 << 1)
+#define  HDCP_SHA1_TEXT_0		(7 << 1)
+#define HDCP_SHA_V_PRIME_H0		_MMIO(0x66d04)
+#define HDCP_SHA_V_PRIME_H1		_MMIO(0x66d08)
+#define HDCP_SHA_V_PRIME_H2		_MMIO(0x66d0C)
+#define HDCP_SHA_V_PRIME_H3		_MMIO(0x66d10)
+#define HDCP_SHA_V_PRIME_H4		_MMIO(0x66d14)
+#define HDCP_SHA_V_PRIME(h)		_MMIO((0x66d04 + h * 4))
+#define HDCP_SHA_TEXT		_MMIO(0x66d18)
+
+/* HDCP Auth Registers */
+#define _PORTA_HDCP_AUTHENC		0x66800
+#define _PORTB_HDCP_AUTHENC		0x66500
+#define _PORTC_HDCP_AUTHENC		0x66600
+#define _PORTD_HDCP_AUTHENC		0x66700
+#define _PORTE_HDCP_AUTHENC		0x66A00
+#define _PORTF_HDCP_AUTHENC		0x66900
+#define _PORT_HDCP_AUTHENC(port, x)	_MMIO(_PICK(port, \
+					  _PORTA_HDCP_AUTHENC, \
+					  _PORTB_HDCP_AUTHENC, \
+					  _PORTC_HDCP_AUTHENC, \
+					  _PORTD_HDCP_AUTHENC, \
+					  _PORTE_HDCP_AUTHENC, \
+					  _PORTF_HDCP_AUTHENC) + x)
+#define PORT_HDCP_CONF(port)	_PORT_HDCP_AUTHENC(port, 0x0)
+#define  HDCP_CONF_CAPTURE_AN	BIT(0)
+#define  HDCP_CONF_AUTH_AND_ENC	(BIT(1) | BIT(0))
+#define PORT_HDCP_ANINIT(port)	_PORT_HDCP_AUTHENC(port, 0x4)
+#define PORT_HDCP_ANLO(port)	_PORT_HDCP_AUTHENC(port, 0x8)
+#define PORT_HDCP_ANHI(port)	_PORT_HDCP_AUTHENC(port, 0xC)
+#define PORT_HDCP_BKSVLO(port)	_PORT_HDCP_AUTHENC(port, 0x10)
+#define PORT_HDCP_BKSVHI(port)	_PORT_HDCP_AUTHENC(port, 0x14)
+#define PORT_HDCP_RPRIME(port)	_PORT_HDCP_AUTHENC(port, 0x18)
+#define PORT_HDCP_STATUS(port)	_PORT_HDCP_AUTHENC(port, 0x1C)
+#define  HDCP_STATUS_STREAM_A_ENC	BIT(31)
+#define  HDCP_STATUS_STREAM_B_ENC	BIT(30)
+#define  HDCP_STATUS_STREAM_C_ENC	BIT(29)
+#define  HDCP_STATUS_STREAM_D_ENC	BIT(28)
+#define  HDCP_STATUS_AUTH		BIT(21)
+#define  HDCP_STATUS_ENC		BIT(20)
+#define  HDCP_STATUS_RI_MATCH	BIT(19)
+#define  HDCP_STATUS_R0_READY	BIT(18)
+#define  HDCP_STATUS_AN_READY	BIT(17)
+#define  HDCP_STATUS_CIPHER		BIT(16)
+#define  HDCP_STATUS_FRAME_CNT(x)	((x >> 8) & 0xff)
+
 /* Per-pipe DDI Function Control */
 #define _TRANS_DDI_FUNC_CTL_A		0x60400
 #define _TRANS_DDI_FUNC_CTL_B		0x61400
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 36d4e635e4ce..d452c327dc1d 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -110,6 +110,8 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
 		to_intel_digital_connector_state(old_state);
 	struct drm_crtc_state *crtc_state;
 
+	intel_hdcp_atomic_check(conn, old_state, new_state);
+
 	if (!new_state->crtc)
 		return 0;
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index f51645a08dca..2766b5e5c0ac 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2423,6 +2423,11 @@ static void intel_enable_ddi(struct intel_encoder *encoder,
 		intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
 	else
 		intel_enable_ddi_dp(encoder, crtc_state, conn_state);
+
+	/* Enable hdcp if it's desired */
+	if (conn_state->content_protection ==
+	    DRM_MODE_CONTENT_PROTECTION_DESIRED)
+		intel_hdcp_enable(to_intel_connector(conn_state->connector));
 }
 
 static void intel_disable_ddi_dp(struct intel_encoder *encoder,
@@ -2457,6 +2462,8 @@ static void intel_disable_ddi(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
+	intel_hdcp_disable(to_intel_connector(old_conn_state->connector));
+
 	if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
 		intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
 	else
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0cd355978ab4..02bf31d935b4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15217,6 +15217,10 @@ static void intel_hpd_poll_fini(struct drm_device *dev)
 	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->modeset_retry_work.func)
 			cancel_work_sync(&connector->modeset_retry_work);
+		if (connector->hdcp_shim) {
+			cancel_delayed_work_sync(&connector->hdcp_check_work);
+			cancel_work_sync(&connector->hdcp_prop_work);
+		}
 	}
 	drm_connector_list_iter_end(&conn_iter);
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9848e8eb0074..c59277c5b63e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -301,6 +301,76 @@ struct intel_panel {
 	} backlight;
 };
 
+/*
+ * This structure serves as a translation layer between the generic HDCP code
+ * and the bus-specific code. What that means is that HDCP over HDMI differs
+ * from HDCP over DP, so to account for these differences, we need to
+ * communicate with the receiver through this shim.
+ *
+ * For completeness, the 2 buses differ in the following ways:
+ *	- DP AUX vs. DDC
+ *		HDCP registers on the receiver are set via DP AUX for DP, and
+ *		they are set via DDC for HDMI.
+ *	- Receiver register offsets
+ *		The offsets of the registers are different for DP vs. HDMI
+ *	- Receiver register masks/offsets
+ *		For instance, the ready bit for the KSV fifo is in a different
+ *		place on DP vs HDMI
+ *	- Receiver register names
+ *		Seriously. In the DP spec, the 16-bit register containing
+ *		downstream information is called BINFO, on HDMI it's called
+ *		BSTATUS. To confuse matters further, DP has a BSTATUS register
+ *		with a completely different definition.
+ *	- KSV FIFO
+ *		On HDMI, the ksv fifo is read all at once, whereas on DP it must
+ *		be read 3 keys at a time
+ *	- Aksv output
+ *		Since Aksv is hidden in hardware, there's different procedures
+ *		to send it over DP AUX vs DDC
+ */
+struct intel_hdcp_shim {
+	/* Outputs the transmitter's An and Aksv values to the receiver. */
+	int (*write_an_aksv)(struct intel_digital_port *intel_dig_port, u8 *an);
+
+	/* Reads the receiver's key selection vector */
+	int (*read_bksv)(struct intel_digital_port *intel_dig_port, u8 *bksv);
+
+	/*
+	 * Reads BINFO from DP receivers and BSTATUS from HDMI receivers. The
+	 * definitions are the same in the respective specs, but the names are
+	 * different. Call it BSTATUS since that's the name the HDMI spec
+	 * uses and it was there first.
+	 */
+	int (*read_bstatus)(struct intel_digital_port *intel_dig_port,
+			    u8 *bstatus);
+
+	/* Determines whether a repeater is present downstream */
+	int (*repeater_present)(struct intel_digital_port *intel_dig_port,
+				bool *repeater_present);
+
+	/* Reads the receiver's Ri' value */
+	int (*read_ri_prime)(struct intel_digital_port *intel_dig_port, u8 *ri);
+
+	/* Determines if the receiver's KSV FIFO is ready for consumption */
+	int (*read_ksv_ready)(struct intel_digital_port *intel_dig_port,
+			      bool *ksv_ready);
+
+	/* Reads the ksv fifo for num_downstream devices */
+	int (*read_ksv_fifo)(struct intel_digital_port *intel_dig_port,
+			     int num_downstream, u8 *ksv_fifo);
+
+	/* Reads a 32-bit part of V' from the receiver */
+	int (*read_v_prime_part)(struct intel_digital_port *intel_dig_port,
+				 int i, u32 *part);
+
+	/* Enables HDCP signalling on the port */
+	int (*toggle_signalling)(struct intel_digital_port *intel_dig_port,
+				 bool enable);
+
+	/* Ensures the link is still protected */
+	bool (*check_link)(struct intel_digital_port *intel_dig_port);
+};
+
 struct intel_connector {
 	struct drm_connector base;
 	/*
@@ -332,6 +402,12 @@ struct intel_connector {
 
 	/* Work struct to schedule a uevent on link train failure */
 	struct work_struct modeset_retry_work;
+
+	const struct intel_hdcp_shim *hdcp_shim;
+	struct mutex hdcp_mutex;
+	uint64_t hdcp_value; /* protected by hdcp_mutex */
+	struct delayed_work hdcp_check_work;
+	struct work_struct hdcp_prop_work;
 };
 
 struct intel_digital_connector_state {
@@ -1761,6 +1837,15 @@ static inline void intel_backlight_device_unregister(struct intel_connector *con
 }
 #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
 
+/* intel_hdcp.c */
+void intel_hdcp_atomic_check(struct drm_connector *connector,
+			     struct drm_connector_state *old_state,
+			     struct drm_connector_state *new_state);
+int intel_hdcp_init(struct intel_connector *connector,
+		    const struct intel_hdcp_shim *hdcp_shim);
+int intel_hdcp_enable(struct intel_connector *connector);
+int intel_hdcp_disable(struct intel_connector *connector);
+int intel_hdcp_check_link(struct intel_connector *connector);
 
 /* intel_psr.c */
 void intel_psr_enable(struct intel_dp *intel_dp,
diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
new file mode 100644
index 000000000000..519d555c05b9
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -0,0 +1,740 @@
+/*
+ * Copyright (C) 2017 Google, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Sean Paul <seanpaul@xxxxxxxxxxxx>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_hdcp.h>
+#include <linux/i2c.h>
+#include <linux/random.h>
+
+#include "intel_drv.h"
+#include "i915_reg.h"
+
+#define KEY_LOAD_TRIES	5
+
+static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port,
+				    const struct intel_hdcp_shim *shim)
+{
+	int ret, read_ret;
+	bool ksv_ready;
+
+	/* Poll for ksv list ready (spec says max time allowed is 5s) */
+	ret = __wait_for(read_ret = shim->read_ksv_ready(intel_dig_port,
+							 &ksv_ready),
+			 read_ret || ksv_ready, 5 * 1000 * 1000, 1000,
+			 100 * 1000);
+	if (ret)
+		return ret;
+	if (read_ret)
+		return read_ret;
+	if (!ksv_ready)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void intel_hdcp_clear_keys(struct drm_i915_private *dev_priv)
+{
+	I915_WRITE(HDCP_KEY_CONF, HDCP_CLEAR_KEYS_TRIGGER);
+	I915_WRITE(HDCP_KEY_STATUS, HDCP_KEY_LOAD_DONE | HDCP_KEY_LOAD_STATUS |
+		   HDCP_FUSE_IN_PROGRESS | HDCP_FUSE_ERROR | HDCP_FUSE_DONE);
+}
+
+static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv)
+{
+	int ret;
+	u32 val;
+
+	/* Initiate loading the HDCP key from fuses */
+	mutex_lock(&dev_priv->pcu_lock);
+	ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_LOAD_HDCP_KEYS, 1);
+	mutex_unlock(&dev_priv->pcu_lock);
+	if (ret) {
+		DRM_ERROR("Failed to initiate HDCP key load (%d)\n", ret);
+		return ret;
+	}
+
+	/* Wait for the keys to load (500us) */
+	ret = __intel_wait_for_register(dev_priv, HDCP_KEY_STATUS,
+					HDCP_KEY_LOAD_DONE, HDCP_KEY_LOAD_DONE,
+					10, 1, &val);
+	if (ret)
+		return ret;
+	else if (!(val & HDCP_KEY_LOAD_STATUS))
+		return -ENXIO;
+
+	/* Send Aksv over to PCH display for use in authentication */
+	I915_WRITE(HDCP_KEY_CONF, HDCP_AKSV_SEND_TRIGGER);
+
+	return 0;
+}
+
+/* Returns updated SHA-1 index */
+static int intel_write_sha_text(struct drm_i915_private *dev_priv, u32 sha_text)
+{
+	I915_WRITE(HDCP_SHA_TEXT, sha_text);
+	if (intel_wait_for_register(dev_priv, HDCP_REP_CTL,
+				    HDCP_SHA1_READY, HDCP_SHA1_READY, 1)) {
+		DRM_ERROR("Timed out waiting for SHA1 ready\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static
+u32 intel_hdcp_get_repeater_ctl(struct intel_digital_port *intel_dig_port)
+{
+	enum port port = intel_dig_port->base.port;
+	switch (port) {
+	case PORT_A:
+		return HDCP_DDIA_REP_PRESENT | HDCP_DDIA_SHA1_M0;
+	case PORT_B:
+		return HDCP_DDIB_REP_PRESENT | HDCP_DDIB_SHA1_M0;
+	case PORT_C:
+		return HDCP_DDIC_REP_PRESENT | HDCP_DDIC_SHA1_M0;
+	case PORT_D:
+		return HDCP_DDID_REP_PRESENT | HDCP_DDID_SHA1_M0;
+	case PORT_E:
+		return HDCP_DDIE_REP_PRESENT | HDCP_DDIE_SHA1_M0;
+	default:
+		break;
+	}
+	DRM_ERROR("Unknown port %d\n", port);
+	return -EINVAL;
+}
+
+static
+bool intel_hdcp_is_ksv_valid(u8 *ksv)
+{
+	int i, ones = 0;
+	/* KSV has 20 1's and 20 0's */
+	for (i = 0; i < DRM_HDCP_KSV_LEN; i++)
+		ones += hweight8(ksv[i]);
+	if (ones != 20)
+		return false;
+	return true;
+}
+
+/* Implements Part 2 of the HDCP authorization procedure */
+static
+int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port,
+			       const struct intel_hdcp_shim *shim)
+{
+	struct drm_i915_private *dev_priv;
+	u32 vprime, sha_text, sha_leftovers, rep_ctl;
+	u8 bstatus[2], num_downstream, *ksv_fifo;
+	int ret, i, j, sha_idx;
+
+	dev_priv = intel_dig_port->base.base.dev->dev_private;
+
+	ret = shim->read_bstatus(intel_dig_port, bstatus);
+	if (ret)
+		return ret;
+
+	/* If there are no downstream devices, we're all done. */
+	num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
+	if (num_downstream == 0) {
+		DRM_INFO("HDCP is enabled (no downstream devices)\n");
+		return 0;
+	}
+
+	ret = intel_hdcp_poll_ksv_fifo(intel_dig_port, shim);
+	if (ret) {
+		DRM_ERROR("KSV list failed to become ready (%d)\n", ret);
+		return ret;
+	}
+
+	ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL);
+	if (!ksv_fifo)
+		return -ENOMEM;
+
+	ret = shim->read_ksv_fifo(intel_dig_port, num_downstream, ksv_fifo);
+	if (ret)
+		return ret;
+
+	/* Process V' values from the receiver */
+	for (i = 0; i < DRM_HDCP_V_PRIME_NUM_PARTS; i++) {
+		ret = shim->read_v_prime_part(intel_dig_port, i, &vprime);
+		if (ret)
+			return ret;
+		I915_WRITE(HDCP_SHA_V_PRIME(i), vprime);
+	}
+
+	/*
+	 * We need to write the concatenation of all device KSVs, BINFO (DP) ||
+	 * BSTATUS (HDMI), and M0 (which is added via HDCP_REP_CTL). This byte
+	 * stream is written via the HDCP_SHA_TEXT register in 32-bit
+	 * increments. Every 64 bytes, we need to write HDCP_REP_CTL again. This
+	 * index will keep track of our progress through the 64 bytes as well as
+	 * helping us work the 40-bit KSVs through our 32-bit register.
+	 *
+	 * NOTE: data passed via HDCP_SHA_TEXT should be big-endian
+	 */
+	sha_idx = 0;
+	sha_text = 0;
+	sha_leftovers = 0;
+	rep_ctl = intel_hdcp_get_repeater_ctl(intel_dig_port);
+	I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
+	for (i = 0; i < num_downstream; i++) {
+		unsigned int sha_empty;
+		u8 *ksv = &ksv_fifo[i * DRM_HDCP_KSV_LEN];
+
+		/* Fill up the empty slots in sha_text and write it out */
+		sha_empty = sizeof(sha_text) - sha_leftovers;
+		for (j = 0; j < sha_empty; j++)
+			sha_text |= ksv[j] << ((sizeof(sha_text) - j - 1) * 8);
+
+		ret = intel_write_sha_text(dev_priv, sha_text);
+		if (ret < 0)
+			return ret;
+
+		/* Programming guide writes this every 64 bytes */
+		sha_idx += sizeof(sha_text);
+		if (!(sha_idx % 64))
+			I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
+
+		/* Store the leftover bytes from the ksv in sha_text */
+		sha_leftovers = DRM_HDCP_KSV_LEN - sha_empty;
+		sha_text = 0;
+		for (j = 0; j < sha_leftovers; j++)
+			sha_text |= ksv[sha_empty + j] <<
+					((sizeof(sha_text) - j - 1) * 8);
+
+		/*
+		 * If we still have room in sha_text for more data, continue.
+		 * Otherwise, write it out immediately.
+		 */
+		if (sizeof(sha_text) > sha_leftovers)
+			continue;
+
+		ret = intel_write_sha_text(dev_priv, sha_text);
+		if (ret < 0)
+			return ret;
+		sha_leftovers = 0;
+		sha_text = 0;
+		sha_idx += sizeof(sha_text);
+	}
+
+	/*
+	 * We need to write BINFO/BSTATUS, and M0 now. Depending on how many
+	 * bytes are leftover from the last ksv, we might be able to fit them
+	 * all in sha_text (first 2 cases), or we might need to split them up
+	 * into 2 writes (last 2 cases).
+	 */
+	if (sha_leftovers == 0) {
+		/* Write 16 bits of text, 16 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_16);
+		ret = intel_write_sha_text(dev_priv,
+					   bstatus[0] << 8 | bstatus[1]);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 32 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 16 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_16);
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+	} else if (sha_leftovers == 1) {
+		/* Write 24 bits of text, 8 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_24);
+		sha_text |= bstatus[0] << 16 | bstatus[1] << 8;
+		/* Only 24-bits of data, must be in the LSB */
+		sha_text = (sha_text & 0xffffff00) >> 8;
+		ret = intel_write_sha_text(dev_priv, sha_text);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 32 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 24 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8);
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+	} else if (sha_leftovers == 2) {
+		/* Write 32 bits of text */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
+		sha_text |= bstatus[0] << 24 | bstatus[1] << 16;
+		ret = intel_write_sha_text(dev_priv, sha_text);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 64 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
+		for (i = 0; i < 2; i++) {
+			ret = intel_write_sha_text(dev_priv, 0);
+			if (ret < 0)
+				return ret;
+			sha_idx += sizeof(sha_text);
+		}
+	} else if (sha_leftovers == 3) {
+		/* Write 32 bits of text */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
+		sha_text |= bstatus[0] << 24;
+		ret = intel_write_sha_text(dev_priv, sha_text);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 8 bits of text, 24 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8);
+		ret = intel_write_sha_text(dev_priv, bstatus[1]);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 32 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+
+		/* Write 8 bits of M0 */
+		I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_24);
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+	} else {
+		DRM_ERROR("Invalid number of leftovers %d\n", sha_leftovers);
+		return -EINVAL;
+	}
+
+	I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
+	/* Fill up to 64-4 bytes with zeros (leave the last write for length) */
+	while ((sha_idx % 64) < (64 - sizeof(sha_text))) {
+		ret = intel_write_sha_text(dev_priv, 0);
+		if (ret < 0)
+			return ret;
+		sha_idx += sizeof(sha_text);
+	}
+
+	/*
+	 * Last write gets the length of the concatenation in bits. That is:
+	 *  - 5 bytes per device
+	 *  - 10 bytes for BINFO/BSTATUS(2), M0(8)
+	 */
+	sha_text = (num_downstream * 5 + 10) * 8;
+	ret = intel_write_sha_text(dev_priv, sha_text);
+	if (ret < 0)
+		return ret;
+
+	/* Tell the HW we're done with the hash and wait for it to ACK */
+	I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_COMPLETE_HASH);
+	if (intel_wait_for_register(dev_priv, HDCP_REP_CTL,
+				    HDCP_SHA1_COMPLETE,
+				    HDCP_SHA1_COMPLETE, 1)) {
+		DRM_ERROR("Timed out waiting for SHA1 complete\n");
+		return -ETIMEDOUT;
+	}
+	if (!(I915_READ(HDCP_REP_CTL) & HDCP_SHA1_V_MATCH)) {
+		DRM_ERROR("SHA-1 mismatch, HDCP failed\n");
+		return -ENXIO;
+	}
+
+	DRM_INFO("HDCP is enabled (%d downstream devices)\n", num_downstream);
+	return 0;
+}
+
+/* Implements Part 1 of the HDCP authorization procedure */
+static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
+			   const struct intel_hdcp_shim *shim)
+{
+	struct drm_i915_private *dev_priv;
+	enum port port;
+	unsigned long r0_prime_gen_start;
+	int ret, i;
+	union {
+		u32 reg[2];
+		u8 shim[DRM_HDCP_AN_LEN];
+	} an;
+	union {
+		u32 reg[2];
+		u8 shim[DRM_HDCP_KSV_LEN];
+	} bksv;
+	union {
+		u32 reg;
+		u8 shim[DRM_HDCP_RI_LEN];
+	} ri;
+	bool repeater_present;
+
+	dev_priv = intel_dig_port->base.base.dev->dev_private;
+
+	port = intel_dig_port->base.port;
+
+	/* Initialize An with 2 random values and acquire it */
+	for (i = 0; i < 2; i++)
+		I915_WRITE(PORT_HDCP_ANINIT(port), get_random_u32());
+	I915_WRITE(PORT_HDCP_CONF(port), HDCP_CONF_CAPTURE_AN);
+
+	/* Wait for An to be acquired */
+	if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
+				    HDCP_STATUS_AN_READY,
+				    HDCP_STATUS_AN_READY, 1)) {
+		DRM_ERROR("Timed out waiting for An\n");
+		return -ETIMEDOUT;
+	}
+
+	an.reg[0] = I915_READ(PORT_HDCP_ANLO(port));
+	an.reg[1] = I915_READ(PORT_HDCP_ANHI(port));
+	ret = shim->write_an_aksv(intel_dig_port, an.shim);
+	if (ret)
+		return ret;
+
+	r0_prime_gen_start = jiffies;
+
+	memset(&bksv, 0, sizeof(bksv));
+	ret = shim->read_bksv(intel_dig_port, bksv.shim);
+	if (ret)
+		return ret;
+	else if (!intel_hdcp_is_ksv_valid(bksv.shim))
+		return -ENODEV;
+
+	I915_WRITE(PORT_HDCP_BKSVLO(port), bksv.reg[0]);
+	I915_WRITE(PORT_HDCP_BKSVHI(port), bksv.reg[1]);
+
+	ret = shim->repeater_present(intel_dig_port, &repeater_present);
+	if (ret)
+		return ret;
+	if (repeater_present)
+		I915_WRITE(HDCP_REP_CTL,
+			   intel_hdcp_get_repeater_ctl(intel_dig_port));
+
+	ret = shim->toggle_signalling(intel_dig_port, true);
+	if (ret)
+		return ret;
+
+	I915_WRITE(PORT_HDCP_CONF(port), HDCP_CONF_AUTH_AND_ENC);
+
+	/* Wait for R0 ready */
+	if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
+		     (HDCP_STATUS_R0_READY | HDCP_STATUS_ENC), 1)) {
+		DRM_ERROR("Timed out waiting for R0 ready\n");
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * Wait for R0' to become available. The spec says 100ms from Aksv, but
+	 * some monitors can take longer than this. We'll set the timeout at
+	 * 300ms just to be sure.
+	 *
+	 * On DP, there's an R0_READY bit available but no such bit
+	 * exists on HDMI. Since the upper-bound is the same, we'll just do
+	 * the stupid thing instead of polling on one and not the other.
+	 */
+	wait_remaining_ms_from_jiffies(r0_prime_gen_start, 300);
+
+	ri.reg = 0;
+	ret = shim->read_ri_prime(intel_dig_port, ri.shim);
+	if (ret)
+		return ret;
+	I915_WRITE(PORT_HDCP_RPRIME(port), ri.reg);
+
+	/* Wait for Ri prime match */
+	if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
+		     (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
+		DRM_ERROR("Timed out waiting for Ri prime match (%x)\n",
+			  I915_READ(PORT_HDCP_STATUS(port)));
+		return -ETIMEDOUT;
+	}
+
+	/* Wait for encryption confirmation */
+	if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
+				    HDCP_STATUS_ENC, HDCP_STATUS_ENC, 20)) {
+		DRM_ERROR("Timed out waiting for encryption\n");
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * XXX: If we have MST-connected devices, we need to enable encryption
+	 * on those as well.
+	 */
+
+	return intel_hdcp_auth_downstream(intel_dig_port, shim);
+}
+
+static
+struct intel_digital_port *conn_to_dig_port(struct intel_connector *connector)
+{
+	return enc_to_dig_port(&intel_attached_encoder(&connector->base)->base);
+}
+
+static int _intel_hdcp_disable(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = connector->base.dev->dev_private;
+	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+	enum port port = intel_dig_port->base.port;
+	int ret;
+
+	I915_WRITE(PORT_HDCP_CONF(port), 0);
+	if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), ~0, 0,
+				    20)) {
+		DRM_ERROR("Failed to disable HDCP, timeout clearing status\n");
+		return -ETIMEDOUT;
+	}
+
+	intel_hdcp_clear_keys(dev_priv);
+
+	ret = connector->hdcp_shim->toggle_signalling(intel_dig_port, false);
+	if (ret) {
+		DRM_ERROR("Failed to disable HDCP signalling\n");
+		return ret;
+	}
+
+	DRM_INFO("HDCP is disabled\n");
+	return 0;
+}
+
+static int _intel_hdcp_enable(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = connector->base.dev->dev_private;
+	int i, ret;
+
+	if (!(I915_READ(SKL_FUSE_STATUS) & SKL_FUSE_PG_DIST_STATUS(1))) {
+		DRM_ERROR("PG1 is disabled, cannot load keys\n");
+		return -ENXIO;
+	}
+
+	for (i = 0; i < KEY_LOAD_TRIES; i++) {
+		ret = intel_hdcp_load_keys(dev_priv);
+		if (!ret)
+			break;
+		intel_hdcp_clear_keys(dev_priv);
+	}
+	if (ret) {
+		DRM_ERROR("Could not load HDCP keys, (%d)\n", ret);
+		return ret;
+	}
+
+	ret = intel_hdcp_auth(conn_to_dig_port(connector),
+			      connector->hdcp_shim);
+	if (ret) {
+		DRM_ERROR("Failed to authenticate HDCP (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void intel_hdcp_check_work(struct work_struct *work)
+{
+	struct intel_connector *connector = container_of(to_delayed_work(work),
+							 struct intel_connector,
+							 hdcp_check_work);
+	if (!intel_hdcp_check_link(connector))
+		schedule_delayed_work(&connector->hdcp_check_work,
+				      DRM_HDCP_CHECK_PERIOD_MS);
+}
+
+static void intel_hdcp_prop_work(struct work_struct *work)
+{
+	struct intel_connector *connector = container_of(work,
+							 struct intel_connector,
+							 hdcp_prop_work);
+	struct drm_device *dev = connector->base.dev;
+	struct drm_connector_state *state;
+
+	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+	mutex_lock(&connector->hdcp_mutex);
+
+	/*
+	 * This worker is only used to flip between ENABLED/DESIRED. Either of
+	 * those to UNDESIRED is handled by core. If hdcp_value == UNDESIRED,
+	 * we're running just after hdcp has been disabled, so just exit
+	 */
+	if (connector->hdcp_value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
+		state = connector->base.state;
+		state->content_protection = connector->hdcp_value;
+	}
+
+	mutex_unlock(&connector->hdcp_mutex);
+	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+}
+
+int intel_hdcp_init(struct intel_connector *connector,
+		    const struct intel_hdcp_shim *hdcp_shim)
+{
+	int ret;
+
+	ret = drm_connector_attach_content_protection_property(
+			&connector->base);
+	if (ret)
+		return ret;
+
+	connector->hdcp_shim = hdcp_shim;
+	mutex_init(&connector->hdcp_mutex);
+	INIT_DELAYED_WORK(&connector->hdcp_check_work, intel_hdcp_check_work);
+	INIT_WORK(&connector->hdcp_prop_work, intel_hdcp_prop_work);
+	return 0;
+}
+
+int intel_hdcp_enable(struct intel_connector *connector)
+{
+	int ret;
+
+	if (!connector->hdcp_shim)
+		return -ENOENT;
+
+	mutex_lock(&connector->hdcp_mutex);
+
+	ret = _intel_hdcp_enable(connector);
+	if (ret)
+		goto out;
+
+	connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_ENABLED;
+	schedule_work(&connector->hdcp_prop_work);
+	schedule_delayed_work(&connector->hdcp_check_work,
+			      DRM_HDCP_CHECK_PERIOD_MS);
+out:
+	mutex_unlock(&connector->hdcp_mutex);
+	return ret;
+}
+
+int intel_hdcp_disable(struct intel_connector *connector)
+{
+	int ret;
+
+	if (!connector->hdcp_shim)
+		return -ENOENT;
+
+	mutex_lock(&connector->hdcp_mutex);
+
+	connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
+	ret = _intel_hdcp_disable(connector);
+
+	mutex_unlock(&connector->hdcp_mutex);
+	cancel_delayed_work_sync(&connector->hdcp_check_work);
+	return ret;
+}
+
+void intel_hdcp_atomic_check(struct drm_connector *connector,
+			     struct drm_connector_state *old_state,
+			     struct drm_connector_state *new_state)
+{
+	uint64_t old_cp = old_state->content_protection;
+	uint64_t new_cp = new_state->content_protection;
+	struct drm_crtc_state *crtc_state;
+
+	if (!new_state->crtc) {
+		/*
+		 * If the connector is being disabled with CP enabled, mark it
+		 * desired so it's re-enabled when the connector is brought back
+		 */
+		if (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED)
+			new_state->content_protection =
+				DRM_MODE_CONTENT_PROTECTION_DESIRED;
+		return;
+	}
+
+	/*
+	 * Nothing to do if the state didn't change, or HDCP was activated since
+	 * the last commit
+	 */
+	if (old_cp == new_cp ||
+	    (old_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED &&
+	     new_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED))
+		return;
+
+	crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
+						   new_state->crtc);
+	crtc_state->mode_changed = true;
+}
+
+/* Implements Part 3 of the HDCP authorization procedure */
+int intel_hdcp_check_link(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = connector->base.dev->dev_private;
+	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+	enum port port = intel_dig_port->base.port;
+	int ret = 0;
+
+	if (!connector->hdcp_shim)
+		return -ENOENT;
+
+	mutex_lock(&connector->hdcp_mutex);
+
+	if (connector->hdcp_value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED)
+		goto out;
+
+	if (!(I915_READ(PORT_HDCP_STATUS(port)) & HDCP_STATUS_ENC)) {
+		DRM_ERROR("HDCP check failed: link is not encrypted, %x\n",
+			   I915_READ(PORT_HDCP_STATUS(port)));
+		ret = -ENXIO;
+		connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
+		schedule_work(&connector->hdcp_prop_work);
+		goto out;
+	}
+
+	if (connector->hdcp_shim->check_link(intel_dig_port)) {
+		if (connector->hdcp_value !=
+		    DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
+			connector->hdcp_value =
+				DRM_MODE_CONTENT_PROTECTION_ENABLED;
+			schedule_work(&connector->hdcp_prop_work);
+		}
+		goto out;
+	}
+
+	DRM_INFO("HDCP link failed, retrying authentication\n");
+
+	ret = _intel_hdcp_disable(connector);
+	if (ret) {
+		DRM_ERROR("Failed to disable hdcp (%d)\n", ret);
+		connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
+		schedule_work(&connector->hdcp_prop_work);
+		goto out;
+	}
+
+	ret = _intel_hdcp_enable(connector);
+	if (ret) {
+		DRM_ERROR("Failed to enable hdcp (%d)\n", ret);
+		connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
+		schedule_work(&connector->hdcp_prop_work);
+		goto out;
+	}
+
+out:
+	mutex_unlock(&connector->hdcp_mutex);
+	return ret;
+}
-- 
2.16.0.rc0.223.g4a4ac83678-goog

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux