Re: [PATCH 4/5] drm/i915: Write AVI infoframes for Parade LSPCON

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 14-11-17 om 16:17 schreef Shashank Sharma:
> Different LSPCON vendors specify their custom methods to pass
> AVI infoframes to the LSPCON chip, so does Parade tech.
>
> This patch adds functions to arrange and write AVI infoframes
> into Parade LSPCON chips.
>
> Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_lspcon.c | 119 +++++++++++++++++++++++++++++++++++-
>  1 file changed, 118 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
> index 1ac4c47..77f0687 100644
> --- a/drivers/gpu/drm/i915/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/intel_lspcon.c
> @@ -37,6 +37,12 @@
>  #define  LSPCON_MCA_AVI_IF_KICKOFF (1 << 0)
>  #define  LSPCON_MCA_AVI_IF_HANDLED (1 << 1)
>  
> +/* AUX addresses to write Parade AVI IF */
> +#define LSPCON_PARADE_AVI_IF_WRITE_OFFSET 0x516
> +#define LSPCON_PARADE_AVI_IF_CTRL 0x51E
> +#define  LSPCON_PARADE_AVI_IF_KICKOFF (1 << 7)
> +#define LSPCON_PARADE_AVI_IF_DATA_SIZE 32
> +
>  static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon)
>  {
>  	struct intel_digital_port *dig_port =
> @@ -241,6 +247,113 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
>  	DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n");
>  }
>  
> +static bool lspcon_parade_fw_ready(struct drm_dp_aux *aux)
> +{
> +	u8 avi_if_ctrl;
> +	u8 retry;
> +	ssize_t ret;
> +
> +	/* Check if LSPCON FW is ready for data */
> +	for (retry = 0; retry < 5; retry++) {
> +
> +		if (retry)
> +			usleep_range(200, 300);
> +
> +		ret = drm_dp_dpcd_read(aux, LSPCON_PARADE_AVI_IF_CTRL,
> +				       &avi_if_ctrl, 1);
> +		if (ret < 0) {
> +			DRM_ERROR("Failed to read AVI IF control\n");
> +			return false;
> +		}
> +
> +		if ((avi_if_ctrl & LSPCON_PARADE_AVI_IF_KICKOFF) == 0)
> +			return true;
> +	}
> +
> +	DRM_ERROR("Parade FW not ready to accept AVI IF\n");
> +	return false;
> +}
> +
> +static bool _lspcon_parade_write_infoframe_blocks(struct drm_dp_aux *aux,
> +					       uint8_t *avi_buf)
> +{
> +	u8 avi_if_ctrl;
> +	u8 block_count = 0;
> +	u8 *data;
> +	uint16_t reg;
> +	ssize_t ret;
> +
> +	while (block_count < 4) {
> +
> +		if (!lspcon_parade_fw_ready(aux)) {
> +			DRM_DEBUG_KMS("LSPCON FW not ready, block %d\n",
> +				       block_count);
> +			return false;
> +		}
> +
> +		reg = LSPCON_PARADE_AVI_IF_WRITE_OFFSET;
> +		data = avi_buf + block_count * 8;
> +		ret = drm_dp_dpcd_write(aux, reg, data, 8);
> +		if (ret < 0) {
> +			DRM_ERROR("Failed to write AVI IF block %d\n",
> +				   block_count);
> +			return false;
> +		}
> +
> +		/*
> +		 * Once a block of data is written, we have to inform the FW
> +		 * about this by writing into avi infoframe control register:
> +		 * - set the kickoff bit[7] to 1
> +		 * - write the block no. to bits[1:0]
> +		 */
> +		reg = LSPCON_PARADE_AVI_IF_CTRL;
> +		avi_if_ctrl = LSPCON_PARADE_AVI_IF_KICKOFF | block_count;
> +		ret = drm_dp_dpcd_write(aux, reg, &avi_if_ctrl, 1);
> +		if (ret < 0) {
> +			DRM_ERROR("Failed to update (0x%x), block %d\n",
> +					reg, block_count);
> +			return false;
> +		}
> +
> +		block_count++;
> +	}
> +
> +	DRM_DEBUG_KMS("Wrote AVI IF blocks successfully\n");
> +	return true;
> +}
> +
> +static bool _lspcon_write_avi_infoframe_parade(struct drm_dp_aux *aux,
> +					       const uint8_t *frame,
> +					       ssize_t len)
> +{
> +	uint8_t avi_if[LSPCON_PARADE_AVI_IF_DATA_SIZE] = {1, };
> +
> +	/*
> +	 * Parade's frames contains 32 bytes of data, divided
> +	 * into 4 frames:
> +	 *	Token byte (first byte of first frame, must be non-zero)
> +	 *	HB0 to HB2	 from AVI IF (3 bytes header)
> +	 *	PB0 to PB27 from AVI IF (28 bytes data)
> +	 * So it should look like this
> +	 *	first block: | <token> <HB0-HB2> <DB0-DB3> |
> +	 *	next 3 blocks: |<DB4-DB11>|<DB12-DB19>|<DB20-DB28>|
> +	 */
> +
> +	if (len > LSPCON_PARADE_AVI_IF_DATA_SIZE - 1) {
> +		DRM_ERROR("Invalid length of infoframes\n");
> +		return false;
> +	}
> +
> +	memcpy(&avi_if[1], frame, len);
> +
> +	if (!_lspcon_parade_write_infoframe_blocks(aux, avi_if)) {
> +		DRM_DEBUG_KMS("Failed to write infoframe blocks\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
>  static bool _lspcon_write_avi_infoframe_mca(struct drm_dp_aux *aux,
>  					     const uint8_t *buffer, ssize_t len)
>  {
> @@ -295,7 +408,7 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,
>  			     enum hdmi_infoframe_type type,
>  			     const void *frame, ssize_t len)
>  {
> -	bool ret = true;
> +	bool ret;
>  	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>  	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
>  
> @@ -306,6 +419,10 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,
>  	if (lspcon->vendor == LSPCON_VENDOR_MCA)
>  		ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
>  						      frame, len);
> +	else
> +		ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux,
> +							 frame, len);
If you make it a switch (lspcon->vendor) and don't add a default case, you will get a compiler warning when you add a new vendor to the enumeration.

With that changed for first 4 patches:

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux