Re: [PATCH v4] drm/i915: Show IPEIR and IPEHR in the engine dump

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Tvrtko Ursulin (2017-12-18 12:58:51)
> 
> On 18/12/2017 12:39, Chris Wilson wrote:
> > A useful bit of information for inspecting GPU stalls from
> > intel_engine_dump() are the error registers, IPEIR and IPEHR.
> > 
> > v2: Fixup gen changes in register offsets (Tvrtko)
> > v3: Old FADDR location as well
> > v4: Use I915_READ64_2x32
> > 
> > Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > Cc: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx>
> > Cc: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
> > Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
> > ---
> >   drivers/gpu/drm/i915/intel_engine_cs.c | 18 ++++++++++++++++++
> >   1 file changed, 18 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
> > index 510e0bc3a377..b4807497e92d 100644
> > --- a/drivers/gpu/drm/i915/intel_engine_cs.c
> > +++ b/drivers/gpu/drm/i915/intel_engine_cs.c
> > @@ -1757,6 +1757,24 @@ void intel_engine_dump(struct intel_engine_cs *engine,
> >       addr = intel_engine_get_last_batch_head(engine);
> >       drm_printf(m, "    BBADDR: 0x%08x_%08x\n",
> >                  upper_32_bits(addr), lower_32_bits(addr));
> > +     if (INTEL_GEN(dev_priv) >= 8)
> > +             addr = I915_READ64_2x32(RING_DMA_FADD(engine->mmio_base),
> > +                                     RING_DMA_FADD_UDW(engine->mmio_base));
> > +     else if (INTEL_GEN(dev_priv) >= 4)
> > +             addr = I915_READ(RING_DMA_FADD(engine->mmio_base));
> > +     else
> > +             addr = I915_READ(DMA_FADD_I8XX);
> > +     drm_printf(m, "    DMA_FADDR: 0x%08x_%08x\n",
> > +                upper_32_bits(addr), lower_32_bits(addr));
> > +     if (INTEL_GEN(dev_priv) >= 4) {
> > +             drm_printf(m, "    IPEIR: 0x%08x\n",
> > +                        I915_READ(RING_IPEIR(engine->mmio_base)));
> > +             drm_printf(m, "    IPEHR: 0x%08x\n",
> > +                        I915_READ(RING_IPEHR(engine->mmio_base)));
> > +     } else {
> > +             drm_printf(m, "    IPEIR: 0x%08x\n", I915_READ(IPEIR));
> > +             drm_printf(m, "    IPEHR: 0x%08x\n", I915_READ(IPEHR));
> > +     }
> >   
> >       if (HAS_EXECLISTS(dev_priv)) {
> >               const u32 *hws = &engine->status_page.page_addr[I915_HWS_CSB_BUF0_INDEX];
> > 
> 
> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>

Thanks for the review, lots of fixes in such a small patch.
Pushed, so just the selftest for per-engine resets remaining, which I
hope Michel will pick up later.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux