Hello,
I have an issue though i'm not really sure where it belongs to, i915,
mesa, drm or xorg, so i'm really sorry if it doesn't belong here.
The issue is as follows:
I em experiencing a very noticeable stuttering (mainly on scroll) in any
app *only* when an external monitor is enabled, and the stutter happens
*only* on the external monitor (normally, see below), connected through
HDMI.
This happens with mirrored or extended xrandr displays.
Is almost as if the external monitor is running on a lower FPS then the
laptop monitor, which is smooth.
If i turn OFF eDP1 display then HDMI display becomes buttery smooth (i
have a very keen eye for FPS, tearing and refresh from playing FPS
games).
Both monitors support and are set to 60hz.
I mainly use awesomewm, compton and and xf86-video-intel ddx (with
TearFree disabled), but i tested the issue in MANY other scenarios, as
described below.
My setup is as follows:
Haswell i7-4700MQ
Clevo W230ST laptop, with nvidia optimus.
Nvidia card is switched off with bbswitch.
Arch Linux
Kernel 4.14.3-1-ARCH #1 SMP PREEMPT
x86_64
Xorg 1.19.5
Mesa 17.2.6
What i've tried without any success:
- Disabling compton
- Using other window manager (openbox)
- Enabling TearFree
- Using xf86 modesetting driver
- i915 kernel flags: enable_psr 1/0, enable_fbc 1/0, edp_swing 2,
enable_dc 1/0, lvds_use_ssc 0, lvds_channel_mode 2
Then i tried using nvidia card (with xrandr --setprovideroutputsource
modesetting NVIDIA-0), which i use for playing, and then the situation
REVERSED (!!!): HDMI is buttery smooth but eDP1 is stuttering, if i
disable either display the problem goes away.
Please help, and thank you very much in advance,
Renato
i915 params:
alpha_support = "Y"
disable_display = "N"
disable_power_well = "1"
edp_vswing = "0"
enable_cmd_parser = "Y"
enable_dc = "-1"
enable_dp_mst = "Y"
enable_dpcd_backlight= "N"
enable_execlists = "0"
enable_fbc = "1"
enable_guc_loading = "0"
enable_guc_submission= "0"
enable_gvt = "N"
enable_hangcheck = "Y"
enable_ips = "1"
enable_ppgtt = "1"
enable_psr = "1"
enable_rc6 = "1"
error_capture = "Y"
fastboot = "N"
force_reset_modeset_test= "N"
guc_firmware_path = "(null)"
guc_log_level = "-1"
huc_firmware_path = "(null)"
inject_load_failure = "0"
invert_brightness = "0"
load_detect_test = "N"
lvds_channel_mode = "0"
lvds_use_ssc = "-1"
mmio_debug = "0"
modeset = "-1"
nuclear_pageflip = "N"
panel_ignore_lid = "1"
prefault_disable = "N"
reset = "2"
semaphores = "1"
use_mmio_flip = "0"
vbt_firmware = "(null)"
vbt_sdvo_panel_type = "-1"
verbose_state_checks= "Y"
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (0x48) normal (normal left inverted right x axis y axis) 280mm x 160mm
Identifier: 0x43
Timestamp: 277291
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000dae431300000000
34150104a51c10780293ada9534c9625
114f5300000001010101010101010101
010101010101363680a0703820402e1e
24001aa510000018242480a070382040
2e1e24001aa510000018000000fe0043
4d4e0a202020202020202020000000fe
004e3133334853452d4541310a2000cd
BACKLIGHT: 2441
range: (0, 2441)
Backlight: 2441
range: (0, 2441)
scaling mode: Full aspect
supported: Full, Center, Full aspect
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
link-status: Good
supported: Good, Bad
1920x1080 (0x48) 138.780MHz -HSync -VSync *current +preferred
h: width 1920 start 1966 end 1996 total 2080 skew 0 clock 66.72KHz
v: height 1080 start 1082 end 1086 total 1112 clock 60.00Hz
1920x1080 (0x164) 92.520MHz -HSync -VSync
h: width 1920 start 1966 end 1996 total 2080 skew 0 clock 44.48KHz
v: height 1080 start 1082 end 1086 total 1112 clock 40.00Hz
1400x1050 (0x165) 122.000MHz +HSync +VSync
h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.89KHz
v: height 1050 start 1052 end 1064 total 1082 clock 59.98Hz
1600x900 (0x166) 118.997MHz -HSync +VSync
h: width 1600 start 1696 end 1864 total 2128 skew 0 clock 55.92KHz
v: height 900 start 901 end 904 total 932 clock 60.00Hz
1280x1024 (0x167) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x960 (0x168) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1368x768 (0x169) 85.860MHz -HSync +VSync
h: width 1368 start 1440 end 1584 total 1800 skew 0 clock 47.70KHz
v: height 768 start 769 end 772 total 795 clock 60.00Hz
1280x720 (0x16a) 74.480MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.76KHz
v: height 720 start 721 end 724 total 746 clock 60.00Hz
1024x768 (0x16b) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
1024x576 (0x16c) 46.995MHz -HSync +VSync
h: width 1024 start 1064 end 1168 total 1312 skew 0 clock 35.82KHz
v: height 576 start 577 end 580 total 597 clock 60.00Hz
960x540 (0x16d) 40.784MHz -HSync +VSync
h: width 960 start 992 end 1088 total 1216 skew 0 clock 33.54KHz
v: height 540 start 541 end 544 total 559 clock 60.00Hz
800x600 (0x16e) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x16f) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
864x486 (0x170) 32.901MHz -HSync +VSync
h: width 864 start 888 end 976 total 1088 skew 0 clock 30.24KHz
v: height 486 start 487 end 490 total 504 clock 60.00Hz
640x480 (0x171) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x405 (0x172) 22.176MHz -HSync +VSync
h: width 720 start 728 end 800 total 880 skew 0 clock 25.20KHz
v: height 405 start 406 end 409 total 420 clock 60.00Hz
640x360 (0x173) 17.187MHz -HSync +VSync
h: width 640 start 640 end 704 total 768 skew 0 clock 22.38KHz
v: height 360 start 361 end 364 total 373 clock 60.00Hz
HDMI1 connected 1920x1080+0+0 (0x49) normal (normal left inverted right x axis y axis) 510mm x 290mm
Identifier: 0x44
Timestamp: 277291
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff001e6de4577a110100
fb1e010380331d78eac665a059589d27
0e5054a76b80b30081808140714f0101
010101010101023a801871382d40582c
4500fe221100001e000000fd00384b1e
530f000a202020202020000000fc0045
323336300a20202020202020000000ff
004c474553502d3132323031300a010a
02031df14a900403011412051f101323
0907078301000065030c001000023a80
1871382d40582c4500fe221100001e01
1d8018711c1620582c2500fe22110000
9e011d007251d01e206e285500fe2211
00001e8c0ad08a20e02d10103e9600fe
22110000180000000000000000000000
000000000000000000000000000000e6
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Full
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
link-status: Good
supported: Good, Bad
1920x1080 (0x49) 148.500MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0x174) 148.500MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.25KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.00Hz
1920x1080 (0x175) 148.352MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.43KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.94Hz
1920x1080i (0x176) 74.250MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.75KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.00Hz
1920x1080i (0x177) 74.250MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.12KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.00Hz
1920x1080i (0x178) 74.176MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.72KHz
v: height 1080 start 1084 end 1094 total 1125 clock 59.94Hz
1680x1050 (0x179) 119.000MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.67KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.88Hz
1280x1024 (0x17a) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x167) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x960 (0x168) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1152x864 (0x17b) 108.000MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.50KHz
v: height 864 start 865 end 868 total 900 clock 75.00Hz
1280x720 (0x17c) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
1280x720 (0x17d) 74.250MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.50KHz
v: height 720 start 725 end 730 total 750 clock 50.00Hz
1280x720 (0x17e) 74.176MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 44.96KHz
v: height 720 start 725 end 730 total 750 clock 59.94Hz
1024x768 (0x17f) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x16b) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
832x624 (0x180) 57.284MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.73KHz
v: height 624 start 625 end 628 total 667 clock 74.55Hz
800x600 (0x181) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x16e) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x16f) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
720x576 (0x182) 27.000MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.25KHz
v: height 576 start 581 end 586 total 625 clock 50.00Hz
720x480 (0x183) 27.027MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
720x480 (0x184) 27.000MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
640x480 (0x185) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x186) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0x171) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x187) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
VGA1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 277291
Subpixel: unknown
Clones:
CRTCs: 0 1 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
link-status: Good
supported: Good, Bad
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x46
Timestamp: 277291
Subpixel: no subpixels
Clones:
CRTCs: 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
[ 41.097]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 41.097] X Protocol Version 11, Revision 0
[ 41.097] Build Operating System: Linux 4.9.54-1-lts x86_64
[ 41.097] Current Operating System: Linux redacted 4.14.3-1-ARCH #1 SMP PREEMPT Thu Nov 30 18:33:13 UTC 2017 x86_64
[ 41.097] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img cryptdevice=PARTUUID=9ea316f8-d5af-4ca0-850c-1c6ee579a079:cryptroot:allow-discards add_efi_memmap rootfstype=ext4 root=/dev/mapper/cryptroot i915.enable_fbc=1 i915.enable_psr=1 usbcore.autosuspend=-1 rd.luks.options=discard acpi_osi=Linux quiet rw
[ 41.098] Build Date: 12 October 2017 09:59:53PM
[ 41.098]
[ 41.098] Current version of pixman: 0.34.0
[ 41.098] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 41.098] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41.098] (==) Log file: "/home/redacted/.local/share/xorg/Xorg.0.log", Time: Wed Dec 6 21:00:53 2017
[ 41.101] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 41.101] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 41.102] (==) No Layout section. Using the first Screen section.
[ 41.102] (==) No screen section available. Using defaults.
[ 41.102] (**) |-->Screen "Default Screen Section" (0)
[ 41.102] (**) | |-->Monitor "<default monitor>"
[ 41.102] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 41.102] (**) | |-->Device "Intel Graphics"
[ 41.102] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 41.102] (==) Automatically adding devices
[ 41.102] (==) Automatically enabling devices
[ 41.102] (==) Automatically adding GPU devices
[ 41.102] (==) Automatically binding GPU devices
[ 41.102] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 41.104] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 41.104] Entry deleted from font path.
[ 41.104] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 41.104] Entry deleted from font path.
[ 41.104] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 41.104] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 41.104] Entry deleted from font path.
[ 41.104] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 41.104] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 41.104] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41.104] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.104] (II) Loader magic: 0x55abe388cd60
[ 41.104] (II) Module ABI versions:
[ 41.104] X.Org ANSI C Emulation: 0.4
[ 41.104] X.Org Video Driver: 23.0
[ 41.104] X.Org XInput driver : 24.1
[ 41.104] X.Org Server Extension : 10.0
[ 41.105] (++) using VT number 1
[ 41.105] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 41.106] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 41.106] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 41.107] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 41.108] (--) PCI:*(0:0:2:0) 8086:0416:1558:0230 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 41.108] (--) PCI: (0:1:0:0) 10de:11e2:1558:0230 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 41.108] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 41.108] (II) "glx" will be loaded by default.
[ 41.108] (II) LoadModule: "glamoregl"
[ 41.108] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 41.114] (II) Module glamoregl: vendor="X.Org Foundation"
[ 41.114] compiled for 1.19.5, module version = 1.0.0
[ 41.114] ABI class: X.Org ANSI C Emulation, version 0.4
[ 41.114] (II) LoadModule: "glx"
[ 41.117] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.126] (II) Module glx: vendor="X.Org Foundation"
[ 41.126] compiled for 1.19.5, module version = 1.0.0
[ 41.126] ABI class: X.Org Server Extension, version 10.0
[ 41.126] (II) LoadModule: "intel"
[ 41.129] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 41.132] (II) Module intel: vendor="X.Org Foundation"
[ 41.132] compiled for 1.19.5, module version = 2.99.917
[ 41.132] Module class: X.Org Video Driver
[ 41.132] ABI class: X.Org Video Driver, version 23.0
[ 41.132] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 41.132] (II) intel: Driver for Intel(R) HD Graphics
[ 41.132] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 41.132] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 41.132] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 41.133] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170818
[ 41.133] (II) intel(0): SNA compiled from 2.99.917-800-g37a682aa
[ 41.134] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 41.135] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 41.135] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 41.135] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 41.135] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 41.135] (==) intel(0): RGB weight 888
[ 41.135] (==) intel(0): Default visual is TrueColor
[ 41.135] (**) intel(0): Option "Backlight" "intel_backlight"
[ 41.135] (II) intel(0): Output eDP1 has no monitor section
[ 41.150] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 41.150] (II) intel(0): Enabled output eDP1
[ 41.150] (II) intel(0): Output VGA1 has no monitor section
[ 41.150] (II) intel(0): Enabled output VGA1
[ 41.150] (II) intel(0): Output HDMI1 has no monitor section
[ 41.150] (II) intel(0): Enabled output HDMI1
[ 41.150] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 41.150] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 41.150] (II) intel(0): Enabled output VIRTUAL1
[ 41.150] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 41.150] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1
[ 41.150] (==) intel(0): TearFree disabled
[ 41.150] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 41.150] (==) intel(0): DPI set to (96, 96)
[ 41.150] (II) Loading sub module "dri3"
[ 41.150] (II) LoadModule: "dri3"
[ 41.150] (II) Module "dri3" already built-in
[ 41.150] (II) Loading sub module "dri2"
[ 41.150] (II) LoadModule: "dri2"
[ 41.150] (II) Module "dri2" already built-in
[ 41.150] (II) Loading sub module "present"
[ 41.150] (II) LoadModule: "present"
[ 41.150] (II) Module "present" already built-in
[ 41.150] (==) Depth 24 pixmap format is 32 bpp
[ 41.155] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 41.155] (==) intel(0): Backing store enabled
[ 41.155] (==) intel(0): Silken mouse enabled
[ 41.155] (II) intel(0): HW Cursor enabled
[ 41.155] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 41.156] (==) intel(0): DPMS enabled
[ 41.156] (==) intel(0): Display hotplug detection enabled
[ 41.156] (II) intel(0): [DRI2] Setup complete
[ 41.156] (II) intel(0): [DRI2] DRI driver: i965
[ 41.156] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 41.156] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 41.156] (II) intel(0): hardware support for Present enabled
[ 41.156] (--) RandR disabled
[ 41.189] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 41.189] (II) AIGLX: enabled GLX_ARB_create_context
[ 41.189] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 41.189] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 41.189] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 41.189] (II) AIGLX: enabled GLX_SGI_swap_control
[ 41.189] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 41.189] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 41.189] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 41.189] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 41.189] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 41.189] (II) AIGLX: Loaded and initialized i965
[ 41.189] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 41.191] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 41.194] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 41.200] (II) intel(0): Setting screen physical size to 508 x 285
[ 41.238] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 41.238] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 41.238] (II) LoadModule: "libinput"
[ 41.238] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 41.243] (II) Module libinput: vendor="X.Org Foundation"
[ 41.243] compiled for 1.19.3, module version = 0.26.0
[ 41.243] Module class: X.Org XInput Driver
[ 41.243] ABI class: X.Org XInput driver, version 24.1
[ 41.243] (II) Using input driver 'libinput' for 'Power Button'
[ 41.243] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 20 paused 0
[ 41.243] (**) Power Button: always reports core events
[ 41.243] (**) Option "Device" "/dev/input/event3"
[ 41.243] (**) Option "_source" "server/udev"
[ 41.243] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 41.243] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 41.243] (II) event3 - (II) Power Button: (II) device removed
[ 41.243] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 41.243] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 41.244] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 41.244] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 41.244] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 41.244] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 41.244] (II) Using input driver 'libinput' for 'Video Bus'
[ 41.244] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[ 41.244] (**) Video Bus: always reports core events
[ 41.244] (**) Option "Device" "/dev/input/event5"
[ 41.244] (**) Option "_source" "server/udev"
[ 41.244] (II) event5 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 41.244] (II) event5 - (II) Video Bus: (II) device is a keyboard
[ 41.244] (II) event5 - (II) Video Bus: (II) device removed
[ 41.244] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 41.244] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 41.245] (II) event5 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 41.245] (II) event5 - (II) Video Bus: (II) device is a keyboard
[ 41.245] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 41.245] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 41.245] (II) Using input driver 'libinput' for 'Video Bus'
[ 41.245] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0
[ 41.245] (**) Video Bus: always reports core events
[ 41.245] (**) Option "Device" "/dev/input/event4"
[ 41.245] (**) Option "_source" "server/udev"
[ 41.245] (II) event4 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 41.245] (II) event4 - (II) Video Bus: (II) device is a keyboard
[ 41.245] (II) event4 - (II) Video Bus: (II) device removed
[ 41.245] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input4/event4"
[ 41.245] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 41.246] (II) event4 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 41.246] (II) event4 - (II) Video Bus: (II) device is a keyboard
[ 41.246] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 41.246] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 41.246] (II) Using input driver 'libinput' for 'Power Button'
[ 41.246] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
[ 41.246] (**) Power Button: always reports core events
[ 41.246] (**) Option "Device" "/dev/input/event0"
[ 41.246] (**) Option "_source" "server/udev"
[ 41.246] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 41.246] (II) event0 - (II) Power Button: (II) device is a keyboard
[ 41.246] (II) event0 - (II) Power Button: (II) device removed
[ 41.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 41.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 41.247] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 41.247] (II) event0 - (II) Power Button: (II) device is a keyboard
[ 41.247] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 41.247] (II) No input driver specified, ignoring this device.
[ 41.247] (II) This device may have been added with another device file.
[ 41.247] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 41.247] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 41.247] (II) Using input driver 'libinput' for 'Sleep Button'
[ 41.247] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0
[ 41.247] (**) Sleep Button: always reports core events
[ 41.247] (**) Option "Device" "/dev/input/event1"
[ 41.247] (**) Option "_source" "server/udev"
[ 41.247] (II) event1 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 41.247] (II) event1 - (II) Sleep Button: (II) device is a keyboard
[ 41.248] (II) event1 - (II) Sleep Button: (II) device removed
[ 41.248] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 41.248] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 41.248] (II) event1 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 41.248] (II) event1 - (II) Sleep Button: (II) device is a keyboard
[ 41.248] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 41.248] (II) No input driver specified, ignoring this device.
[ 41.248] (II) This device may have been added with another device file.
[ 41.248] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 41.248] (II) No input driver specified, ignoring this device.
[ 41.248] (II) This device may have been added with another device file.
[ 41.248] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 41.248] (II) No input driver specified, ignoring this device.
[ 41.248] (II) This device may have been added with another device file.
[ 41.248] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event15)
[ 41.248] (II) No input driver specified, ignoring this device.
[ 41.248] (II) This device may have been added with another device file.
[ 41.249] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event16)
[ 41.249] (II) No input driver specified, ignoring this device.
[ 41.249] (II) This device may have been added with another device file.
[ 41.249] (II) config/udev: Adding input device ROCCAT ROCCAT Kone XTD Optical (/dev/input/event7)
[ 41.249] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "libinput pointer catchall"
[ 41.249] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "libinput keyboard catchall"
[ 41.249] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "mouse"
[ 41.249] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Kone XTD Optical'
[ 41.249] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 27 paused 0
[ 41.249] (**) ROCCAT ROCCAT Kone XTD Optical: always reports core events
[ 41.249] (**) Option "Device" "/dev/input/event7"
[ 41.249] (**) Option "_source" "server/udev"
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) is tagged by udev as: Keyboard Mouse
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) disabling EV_ABS 0x29 on device (min == max == 0)
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) disabling EV_ABS 0x2a on device (min == max == 0)
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) disabling EV_ABS 0x2b on device (min == max == 0)
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device is a pointer
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device is a keyboard
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device removed
[ 41.250] (**) Option "AccelProfile" "flat"
[ 41.250] (II) libinput: ROCCAT ROCCAT Kone XTD Optical: needs a virtual subdevice
[ 41.250] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1E7D:2E23.0001/input/input11/event7"
[ 41.250] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Kone XTD Optical" (type: MOUSE, id 11)
[ 41.250] (**) Option "AccelerationScheme" "none"
[ 41.250] (**) ROCCAT ROCCAT Kone XTD Optical: (accel) selected scheme none/0
[ 41.250] (**) ROCCAT ROCCAT Kone XTD Optical: (accel) acceleration factor: 2.000
[ 41.250] (**) ROCCAT ROCCAT Kone XTD Optical: (accel) acceleration threshold: 4
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) is tagged by udev as: Keyboard Mouse
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) disabling EV_ABS 0x29 on device (min == max == 0)
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) disabling EV_ABS 0x2a on device (min == max == 0)
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) disabling EV_ABS 0x2b on device (min == max == 0)
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device is a pointer
[ 41.250] (II) event7 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device is a keyboard
[ 41.250] (II) config/udev: Adding input device ROCCAT ROCCAT Kone XTD Optical (/dev/input/mouse0)
[ 41.250] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "mouse"
[ 41.250] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Kone XTD Optical'
[ 41.250] (**) ROCCAT ROCCAT Kone XTD Optical: always reports core events
[ 41.250] (**) Option "Device" "/dev/input/mouse0"
[ 41.250] (**) Option "_source" "server/udev"
[ 41.293] (II) mouse0 - failed to create input device '/dev/input/mouse0'.
[ 41.293] (EE) libinput: ROCCAT ROCCAT Kone XTD Optical: Failed to create a device for /dev/input/mouse0
[ 41.293] (EE) PreInit returned 2 for "ROCCAT ROCCAT Kone XTD Optical"
[ 41.293] (II) UnloadModule: "libinput"
[ 41.293] (II) config/udev: Adding input device ROCCAT ROCCAT Kone XTD Optical (/dev/input/event8)
[ 41.293] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "libinput keyboard catchall"
[ 41.293] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Kone XTD Optical'
[ 41.294] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 28 paused 0
[ 41.294] (**) ROCCAT ROCCAT Kone XTD Optical: always reports core events
[ 41.294] (**) Option "Device" "/dev/input/event8"
[ 41.294] (**) Option "_source" "server/udev"
[ 41.294] (II) event8 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) is tagged by udev as: Keyboard
[ 41.294] (II) event8 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device is a keyboard
[ 41.294] (II) event8 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device removed
[ 41.294] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:1E7D:2E23.0002/input/input12/event8"
[ 41.294] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Kone XTD Optical" (type: KEYBOARD, id 12)
[ 41.294] (II) event8 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) is tagged by udev as: Keyboard
[ 41.294] (II) event8 - (II) ROCCAT ROCCAT Kone XTD Optical: (II) device is a keyboard
[ 41.295] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event9)
[ 41.295] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[ 41.295] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 41.295] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 29 paused 0
[ 41.295] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 41.295] (**) Option "Device" "/dev/input/event9"
[ 41.295] (**) Option "_source" "server/udev"
[ 41.295] (II) event9 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) is tagged by udev as: Keyboard
[ 41.295] (II) event9 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) device is a keyboard
[ 41.295] (II) event9 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) device removed
[ 41.295] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:00DB.0003/input/input13/event9"
[ 41.295] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 13)
[ 41.296] (II) event9 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) is tagged by udev as: Keyboard
[ 41.296] (II) event9 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) device is a keyboard
[ 41.296] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event10)
[ 41.296] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[ 41.296] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 41.296] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 30 paused 0
[ 41.296] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 41.296] (**) Option "Device" "/dev/input/event10"
[ 41.296] (**) Option "_source" "server/udev"
[ 41.297] (II) event10 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) is tagged by udev as: Keyboard
[ 41.297] (II) event10 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) device is a keyboard
[ 41.297] (II) event10 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) device removed
[ 41.297] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: needs a virtual subdevice
[ 41.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:045E:00DB.0004/input/input14/event10"
[ 41.297] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: MOUSE, id 14)
[ 41.297] (**) Option "AccelerationScheme" "none"
[ 41.297] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) selected scheme none/0
[ 41.297] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[ 41.297] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[ 41.297] (II) event10 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) is tagged by udev as: Keyboard
[ 41.297] (II) event10 - (II) Microsoft Natural® Ergonomic Keyboard 4000: (II) device is a keyboard
[ 41.297] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event17)
[ 41.297] (II) No input driver specified, ignoring this device.
[ 41.297] (II) This device may have been added with another device file.
[ 41.297] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event18)
[ 41.297] (II) No input driver specified, ignoring this device.
[ 41.297] (II) This device may have been added with another device file.
[ 41.297] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
[ 41.297] (II) No input driver specified, ignoring this device.
[ 41.297] (II) This device may have been added with another device file.
[ 41.298] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 41.298] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 41.298] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 41.298] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[ 41.298] (**) AT Translated Set 2 keyboard: always reports core events
[ 41.298] (**) Option "Device" "/dev/input/event6"
[ 41.298] (**) Option "_source" "server/udev"
[ 41.298] (II) event6 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 41.298] (II) event6 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 41.298] (II) event6 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 41.298] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[ 41.298] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 41.298] (II) event6 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 41.298] (II) event6 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 41.299] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[ 41.299] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 41.299] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[ 41.299] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 41.299] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 32 paused 0
[ 41.299] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 41.299] (**) Option "Device" "/dev/input/event20"
[ 41.299] (**) Option "_source" "server/udev"
[ 41.299] (II) event20 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 41.299] (II) event20 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 41.299] (II) event20 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[ 41.299] (**) Option "Tapping" "on"
[ 41.299] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input17/event20"
[ 41.299] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 41.299] (**) Option "AccelerationScheme" "none"
[ 41.299] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 41.299] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 41.299] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 41.299] (II) event20 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 41.300] (II) event20 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 41.300] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 41.300] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[ 41.300] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 41.300] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 41.300] (**) Option "Device" "/dev/input/mouse1"
[ 41.300] (**) Option "_source" "server/udev"
[ 41.346] (II) mouse1 - failed to create input device '/dev/input/mouse1'.
[ 41.346] (EE) libinput: SynPS/2 Synaptics TouchPad: Failed to create a device for /dev/input/mouse1
[ 41.346] (EE) PreInit returned 2 for "SynPS/2 Synaptics TouchPad"
[ 41.346] (II) UnloadModule: "libinput"
[ 41.346] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 41.346] (II) No input driver specified, ignoring this device.
[ 41.346] (II) This device may have been added with another device file.
[ 41.383] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "libinput pointer catchall"
[ 41.383] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "libinput keyboard catchall"
[ 41.383] (**) ROCCAT ROCCAT Kone XTD Optical: Applying InputClass "mouse"
[ 41.383] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Kone XTD Optical'
[ 41.383] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[ 41.383] (**) ROCCAT ROCCAT Kone XTD Optical: always reports core events
[ 41.383] (**) Option "Device" "/dev/input/event7"
[ 41.383] (**) Option "_source" "_driver/libinput"
[ 41.383] (II) libinput: ROCCAT ROCCAT Kone XTD Optical: is a virtual subdevice
[ 41.383] (**) Option "AccelProfile" "flat"
[ 41.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1E7D:2E23.0001/input/input11/event7"
[ 41.383] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Kone XTD Optical" (type: KEYBOARD, id 17)
[ 41.383] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[ 41.383] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 41.383] (II) systemd-logind: returning pre-existing fd for /dev/input/event10 13:74
[ 41.383] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 41.383] (**) Option "Device" "/dev/input/event10"
[ 41.383] (**) Option "_source" "_driver/libinput"
[ 41.383] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: is a virtual subdevice
[ 41.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:045E:00DB.0004/input/input14/event10"
[ 41.383] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 18)
[ 41.839] (II) intel(0): EDID vendor "CMN", prod id 4931
[ 41.839] (II) intel(0): Printing DDC gathered Modelines:
[ 41.839] (II) intel(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 41.839] (II) intel(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 0.000000] Command line: ... i915.enable_fbc=1 i915.enable_psr=1 acpi_osi=Linux quiet rw
[ 0.000000] ACPI: ASF! 0x00000000CB995640 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x00000000CB99A2A0 000090 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
[ 0.046403] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.056685] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.489360] intel_idle: MWAIT substates: 0x42120
[ 0.489360] intel_idle: v0.4.1 model 0x3C
[ 0.489551] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.490572] intel_pstate: Intel P-state driver initializing
[ 0.562213] [drm] Memory usable by graphics device = 2048M
[ 0.562215] fb: switching to inteldrmfb from EFI VGA
[ 0.562310] [drm] Replacing VGA console driver
[ 0.568654] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.568655] [drm] Driver supports precise vblank timestamp query.
[ 0.570082] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.580758] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 0.683817] fbcon: inteldrmfb (fb0) is primary device
[ 3.130275] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 37.931334] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 37.931460] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
[ 37.931521] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 37.955739] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 37.955805] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 37.955872] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 37.955926] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 37.955978] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 37.958514] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[ 37.958539] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[ 37.959117] intel_rapl: Found RAPL domain package
[ 37.959118] intel_rapl: Found RAPL domain core
[ 37.959118] intel_rapl: Found RAPL domain uncore
[ 37.959119] intel_rapl: Found RAPL domain dram
[ 37.962252] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
