Testing the texture read performance shows that the same tuning for
the SQ credits is needed on GLK as on BXT/APL. This has been also
confirmed by Altug from the HW team.
V2: Rebase
Signed-off-by: Valtteri Rantala <valtteri.rantala@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_engine_cs.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index fede62d..e1dcc91 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -1067,6 +1067,15 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine)
/* WaDisableSTUnitPowerOptimization:skl,bxt,kbl,glk,cfl */
WA_SET_BIT_MASKED(HALF_SLICE_CHICKEN2, GEN8_ST_PO_DISABLE);
+ /* WaProgramL3SqcReg1DefaultForPerf:bxt,glk */
+ if (IS_GEN9_LP(dev_priv)) {
+ u32 val = I915_READ(GEN8_L3SQCREG1);
+
+ val &= ~L3_PRIO_CREDITS_MASK;
+ val |= L3_GENERAL_PRIO_CREDITS(62) | L3_HIGH_PRIO_CREDITS(2);
+ I915_WRITE(GEN8_L3SQCREG1, val);
+ }
+
/* WaOCLCoherentLineFlush:skl,bxt,kbl,cfl */
I915_WRITE(GEN8_L3SQCREG4, (I915_READ(GEN8_L3SQCREG4) |
GEN8_LQSC_FLUSH_COHERENT_LINES));
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
