Hi guys,
On 22/11/2017 11:41, Patchwork wrote:
[snip]
Testlist changes:
+igt@perf_pmu@all-busy-check-all
+igt@perf_pmu@busy-bcs0
+igt@perf_pmu@busy-check-all-bcs0
+igt@perf_pmu@busy-check-all-rcs0
+igt@perf_pmu@busy-check-all-vcs0
+igt@perf_pmu@busy-check-all-vcs1
+igt@perf_pmu@busy-check-all-vecs0
+igt@perf_pmu@busy-no-semaphores-bcs0
+igt@perf_pmu@busy-no-semaphores-rcs0
+igt@perf_pmu@busy-no-semaphores-vcs0
+igt@perf_pmu@busy-no-semaphores-vcs1
+igt@perf_pmu@busy-no-semaphores-vecs0
+igt@perf_pmu@busy-rcs0
+igt@perf_pmu@busy-vcs0
+igt@perf_pmu@busy-vcs1
+igt@perf_pmu@busy-vecs0
+igt@perf_pmu@cpu-hotplug
+igt@perf_pmu@event-wait-rcs0
+igt@perf_pmu@frequency
+igt@perf_pmu@idle-bcs0
+igt@perf_pmu@idle-no-semaphores-bcs0
+igt@perf_pmu@idle-no-semaphores-rcs0
+igt@perf_pmu@idle-no-semaphores-vcs0
+igt@perf_pmu@idle-no-semaphores-vcs1
+igt@perf_pmu@idle-no-semaphores-vecs0
+igt@perf_pmu@idle-rcs0
+igt@perf_pmu@idle-vcs0
+igt@perf_pmu@idle-vcs1
+igt@perf_pmu@idle-vecs0
+igt@perf_pmu@init-busy-bcs0
+igt@perf_pmu@init-busy-rcs0
+igt@perf_pmu@init-busy-vcs0
+igt@perf_pmu@init-busy-vcs1
+igt@perf_pmu@init-busy-vecs0
+igt@perf_pmu@init-sema-bcs0
+igt@perf_pmu@init-sema-rcs0
+igt@perf_pmu@init-sema-vcs0
+igt@perf_pmu@init-sema-vcs1
+igt@perf_pmu@init-sema-vecs0
+igt@perf_pmu@init-wait-bcs0
+igt@perf_pmu@init-wait-rcs0
+igt@perf_pmu@init-wait-vcs0
+igt@perf_pmu@init-wait-vcs1
+igt@perf_pmu@init-wait-vecs0
+igt@perf_pmu@interrupts
+igt@perf_pmu@invalid-init
+igt@perf_pmu@most-busy-check-all-bcs0
+igt@perf_pmu@most-busy-check-all-rcs0
+igt@perf_pmu@most-busy-check-all-vcs0
+igt@perf_pmu@most-busy-check-all-vcs1
+igt@perf_pmu@most-busy-check-all-vecs0
+igt@perf_pmu@multi-client-bcs0
+igt@perf_pmu@multi-client-rcs0
+igt@perf_pmu@multi-client-vcs0
+igt@perf_pmu@multi-client-vcs1
+igt@perf_pmu@multi-client-vecs0
+igt@perf_pmu@other-init-0
+igt@perf_pmu@other-init-1
+igt@perf_pmu@other-init-2
+igt@perf_pmu@other-init-3
+igt@perf_pmu@other-init-4
+igt@perf_pmu@other-init-5
+igt@perf_pmu@other-init-6
+igt@perf_pmu@other-read-0
+igt@perf_pmu@other-read-1
+igt@perf_pmu@other-read-2
+igt@perf_pmu@other-read-3
+igt@perf_pmu@other-read-4
+igt@perf_pmu@other-read-5
+igt@perf_pmu@other-read-6
+igt@perf_pmu@rc6
+igt@perf_pmu@rc6p
+igt@perf_pmu@render-node-busy-bcs0
+igt@perf_pmu@render-node-busy-rcs0
+igt@perf_pmu@render-node-busy-vcs0
+igt@perf_pmu@render-node-busy-vcs1
+igt@perf_pmu@render-node-busy-vecs0
+igt@perf_pmu@semaphore-wait-bcs0
+igt@perf_pmu@semaphore-wait-rcs0
+igt@perf_pmu@semaphore-wait-vcs0
+igt@perf_pmu@semaphore-wait-vcs1
+igt@perf_pmu@semaphore-wait-vecs0
Would it be possible to have a test run of these new tests on the shards?
If successful then we can add it to the testlist. Total runtime should
be up to 30 seconds.
But I wouldn't be surprised if there will be issues since I was only
able to test on SKL during development.
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
