Extremely sorry for the delay.
This works for VFIO_GFX_PLANE_TYPE_REGION. Tested with local changes.
Reviewed-by: Kirti Wankhede <kwankhede@xxxxxxxxxx>
Thanks,
Kirti
On 11/18/2017 9:00 PM, Alex Williamson wrote:
>
> Kirti?
>
> On Wed, 15 Nov 2017 21:11:42 -0700
> Alex Williamson <alex.williamson@xxxxxxxxxx> wrote:
>
>> On Thu, 16 Nov 2017 11:21:56 +0800
>> Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx> wrote:
>>
>>> On 2017.11.15 11:48:42 -0700, Alex Williamson wrote:
>>>> On Wed, 15 Nov 2017 17:11:54 +0800
>>>> Tina Zhang <tina.zhang@xxxxxxxxx> wrote:
>>>>
>>>>> Add VFIO_DEVICE_QUERY_GFX_PLANE ioctl command to let user query and get
>>>>> a plane and its information. So far, two types of buffers are supported:
>>>>> buffers based on dma-buf and buffers based on region.
>>>>>
>>>>> This ioctl can be invoked with:
>>>>> 1) Either DMABUF or REGION flag. Vendor driver returns a plane_info
>>>>> successfully only when the specific kind of buffer is supported.
>>>>> 2) Flag PROBE. And at the same time either DMABUF or REGION must be set,
>>>>> so that vendor driver returns success only when the specific kind of
>>>>> buffer is supported.
>>>>>
>>>>> Add VFIO_DEVICE_GET_GFX_DMABUF ioctl command to let user get a specific
>>>>> dma-buf fd of an exposed MDEV buffer provided by dmabuf_id which was
>>>>> returned in VFIO_DEVICE_QUERY_GFX_PLANE ioctl command.
>>>>>
>>>>> The life cycle of an exposed MDEV buffer is handled by userspace and
>>>>> tracked by kernel space. The returned dmabuf_id in struct vfio_device_
>>>>> query_gfx_plane can be a new id of a new exposed buffer or an old id of
>>>>> a re-exported buffer. Host user can check the value of dmabuf_id to see
>>>>> if it needs to create new resources according to the new exposed buffer
>>>>> or just re-use the existing resource related to the old buffer.
>>>>>
>>>>> v18:
>>>>> - update comments for VFIO_DEVICE_GET_GFX_DMABUF. (Alex)
>>>>>
>>>>> v17:
>>>>> - modify VFIO_DEVICE_GET_GFX_DMABUF interface. (Alex)
>>>>>
>>>>> v16:
>>>>> - add x_hot and y_hot fields. (Gerd)
>>>>> - add comments for VFIO_DEVICE_GET_GFX_DMABUF. (Alex)
>>>>> - rebase to 4.14.0-rc6.
>>>>>
>>>>> v15:
>>>>> - add a ioctl to get a dmabuf for a given dmabuf id. (Gerd)
>>>>>
>>>>> v14:
>>>>> - add PROBE, DMABUF and REGION flags. (Alex)
>>>>>
>>>>> v12:
>>>>> - add drm_format_mod back. (Gerd and Zhenyu)
>>>>> - add region_index. (Gerd)
>>>>>
>>>>> v11:
>>>>> - rename plane_type to drm_plane_type. (Gerd)
>>>>> - move fields of vfio_device_query_gfx_plane to vfio_device_gfx_plane_info.
>>>>> (Gerd)
>>>>> - remove drm_format_mod, start fields. (Daniel)
>>>>> - remove plane_id.
>>>>>
>>>>> v10:
>>>>> - refine the ABI API VFIO_DEVICE_QUERY_GFX_PLANE. (Alex) (Gerd)
>>>>>
>>>>> v3:
>>>>> - add a field gvt_plane_info in the drm_i915_gem_obj structure to save
>>>>> the decoded plane information to avoid look up while need the plane
>>>>> info. (Gerd)
>>>>>
>>>>> Signed-off-by: Tina Zhang <tina.zhang@xxxxxxxxx>
>>>>> Cc: Gerd Hoffmann <kraxel@xxxxxxxxxx>
>>>>> Cc: Alex Williamson <alex.williamson@xxxxxxxxxx>
>>>>> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
>>>>> ---
>>>>> include/uapi/linux/vfio.h | 62 +++++++++++++++++++++++++++++++++++++++++++++++
>>>>> 1 file changed, 62 insertions(+)
>>>>>
>>>>> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
>>>>> index ae46105..5c1cca2 100644
>>>>> --- a/include/uapi/linux/vfio.h
>>>>> +++ b/include/uapi/linux/vfio.h
>>>>> @@ -502,6 +502,68 @@ struct vfio_pci_hot_reset {
>>>>>
>>>>> #define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13)
>>>>>
>>>>> +/**
>>>>> + * VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
>>>>> + * struct vfio_device_query_gfx_plane)
>>>>> + *
>>>>> + * Set the drm_plane_type and flags, then retrieve the gfx plane info.
>>>>> + *
>>>>> + * flags supported:
>>>>> + * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
>>>>> + * to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
>>>>> + * support for dma-buf.
>>>>> + * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
>>>>> + * to ask if the mdev supports region. 0 on support, -EINVAL on no
>>>>> + * support for region.
>>>>> + * - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
>>>>> + * with each call to query the plane info.
>>>>> + * - Others are invalid and return -EINVAL.
>>>>> + *
>>>>> + * Note:
>>>>> + * 1. Plane could be disabled by guest. In that case, success will be
>>>>> + * returned with zero-initialized drm_format, size, width and height
>>>>> + * fields.
>>>>> + * 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
>>>>> + *
>>>>> + * Return: 0 on success, -errno on other failure.
>>>>> + */
>>>>> +struct vfio_device_gfx_plane_info {
>>>>> + __u32 argsz;
>>>>> + __u32 flags;
>>>>> +#define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
>>>>> +#define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
>>>>> +#define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
>>>>> + /* in */
>>>>> + __u32 drm_plane_type; /* type of plane: DRM_PLANE_TYPE_* */
>>>>> + /* out */
>>>>> + __u32 drm_format; /* drm format of plane */
>>>>> + __u64 drm_format_mod; /* tiled mode */
>>>>> + __u32 width; /* width of plane */
>>>>> + __u32 height; /* height of plane */
>>>>> + __u32 stride; /* stride of plane */
>>>>> + __u32 size; /* size of plane in bytes, align on page*/
>>>>> + __u32 x_pos; /* horizontal position of cursor plane */
>>>>> + __u32 y_pos; /* vertical position of cursor plane*/
>>>>> + __u32 x_hot; /* horizontal position of cursor hotspot */
>>>>> + __u32 y_hot; /* vertical position of cursor hotspot */
>>>>> + union {
>>>>> + __u32 region_index; /* region index */
>>>>> + __u32 dmabuf_id; /* dma-buf id */
>>>>> + };
>>>>> +};
>>>>> +
>>>>> +#define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
>>>>> +
>>>>> +/**
>>>>> + * VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
>>>>> + *
>>>>> + * Return a new dma-buf file descriptor for an exposed guest framebuffer
>>>>> + * described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
>>>>> + * DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
>>>>> + */
>>>>> +
>>>>> +#define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
>>>>> +
>>>>> /* -------- API for Type1 VFIO IOMMU -------- */
>>>>>
>>>>> /**
>>>>
>>>> Looks good to me. Kirti, have you had a chance yet to verify this is
>>>> sufficient for your region-based approach? It would be great to get
>>>> confirmation of that ASAP so we can get this in. Thanks,
>>>>
>>>
>>> Alex, do you mind by merging this just through gvt tree? Or you would
>>> like to merge this then send pull request for us then we can apply left?
>>
>> I'm fine with this going through the gvt tree, but I want some
>> confirmation from nvidia that this meets their needs as well before I
>> provide an ack. Thanks,
>>
>> Alex
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
