Re: [PATCH v5 2/6] drm/i915: Stop frobbing with DDI encoder->type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 27-10-17 om 21:31 schreef Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Currently the DDI encoder->type will change at runtime depending on
> what kind of hotplugs we've processed. That's quite bad since we can't
> really trust that that current value of encoder->type actually matches
> the type of signal we're trying to drive through it.
>
> Let's eliminate that problem by declaring that non-eDP DDI port will
> always have the encoder type as INTEL_OUTPUT_DDI. This means the code
> can no longer try to distinguish DP vs. HDMI based on encoder->type.
> We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and
> there's a bunch of code that relies on that value to identify eDP
> encoders.
>
> We'll introduce a new encoder .compute_output_type() hook. This allows
> us to compute the full output_types before any encoder .compute_config()
> hooks get called, thus those hooks can rely on output_types being
> correct, which is useful for cloning on oldr platforms. For now we'll
> just look at the connector type and pick the correct mode based on that.
> In the future the new hook could be used to implement dynamic switching
> between LS and PCON modes for LSPCON.
>
> v2: Fix BXT/GLK PPS explosion with DSI/MST encoders
> v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg
> v4: Rebase
> v5: Populate output_types in .get_config() rather than in the caller
> v5: Split out populating output_types in .get_config() (Maarten)
>
> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c   |  2 +-
>  drivers/gpu/drm/i915/intel_ddi.c      | 32 ++++++++++++++++++++++++--------
>  drivers/gpu/drm/i915/intel_display.c  | 11 ++++++++---
>  drivers/gpu/drm/i915/intel_dp.c       | 19 ++++++-------------
>  drivers/gpu/drm/i915/intel_drv.h      |  7 +++++--
>  drivers/gpu/drm/i915/intel_hdmi.c     | 10 ++--------
>  drivers/gpu/drm/i915/intel_opregion.c |  2 +-
>  7 files changed, 47 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index c1e5bba91bff..39883cd915db 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3051,7 +3051,7 @@ static void intel_connector_info(struct seq_file *m,
>  		break;
>  	case DRM_MODE_CONNECTOR_HDMIA:
>  		if (intel_encoder->type == INTEL_OUTPUT_HDMI ||
> -		    intel_encoder->type == INTEL_OUTPUT_UNKNOWN)
> +		    intel_encoder->type == INTEL_OUTPUT_DDI)
>  			intel_hdmi_info(m, intel_connector);
>  		break;
>  	default:
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 7e0b1a02912a..e5dd281781fe 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -497,10 +497,8 @@ enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder)
>  	switch (encoder->type) {
>  	case INTEL_OUTPUT_DP_MST:
>  		return enc_to_mst(&encoder->base)->primary->port;
> -	case INTEL_OUTPUT_DP:
>  	case INTEL_OUTPUT_EDP:
> -	case INTEL_OUTPUT_HDMI:
> -	case INTEL_OUTPUT_UNKNOWN:
> +	case INTEL_OUTPUT_DDI:
>  		return enc_to_dig_port(&encoder->base)->port;
>  	case INTEL_OUTPUT_ANALOG:
>  		return PORT_E;
> @@ -1534,6 +1532,7 @@ void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
>  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>  	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>  	uint32_t temp;
> +
>  	temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
>  	if (state == true)
>  		temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
> @@ -2652,21 +2651,36 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  	intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
>  }
>  
> +static enum intel_output_type
> +intel_ddi_compute_output_type(struct intel_encoder *encoder,
> +			      struct intel_crtc_state *crtc_state,
> +			      struct drm_connector_state *conn_state)
> +{
> +	switch (conn_state->connector->connector_type) {
> +	case DRM_MODE_CONNECTOR_HDMIA:
> +		return INTEL_OUTPUT_HDMI;
> +	case DRM_MODE_CONNECTOR_eDP:
> +		return INTEL_OUTPUT_EDP;
> +	case DRM_MODE_CONNECTOR_DisplayPort:
> +		return INTEL_OUTPUT_DP;
> +	default:
> +		MISSING_CASE(conn_state->connector->connector_type);
> +		return INTEL_OUTPUT_UNUSED;
> +	}
> +}
> +
>  static bool intel_ddi_compute_config(struct intel_encoder *encoder,
>  				     struct intel_crtc_state *pipe_config,
>  				     struct drm_connector_state *conn_state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> -	int type = encoder->type;
>  	int port = intel_ddi_get_encoder_port(encoder);
>  	int ret;
>  
> -	WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
> -
>  	if (port == PORT_A)
>  		pipe_config->cpu_transcoder = TRANSCODER_EDP;
>  
> -	if (type == INTEL_OUTPUT_HDMI)
> +	if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
>  		ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state);
>  	else
>  		ret = intel_dp_compute_config(encoder, pipe_config, conn_state);

Would it be an option to put it in compute_config for DDI only? There is no risk of cloning there, saves another hook. :)

Either way is fine though.
> @@ -2815,6 +2829,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  	drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
>  			 DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
>  
> +	intel_encoder->compute_output_type = intel_ddi_compute_output_type;
>  	intel_encoder->compute_config = intel_ddi_compute_config;
>  	intel_encoder->enable = intel_enable_ddi;
>  	if (IS_GEN9_LP(dev_priv))
> @@ -2868,9 +2883,10 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  		max_lanes = 4;
>  	}
>  
> +	intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
>  	intel_dig_port->max_lanes = max_lanes;
>  
> -	intel_encoder->type = INTEL_OUTPUT_UNKNOWN;
> +	intel_encoder->type = INTEL_OUTPUT_DDI;
>  	intel_encoder->power_domain = intel_port_to_power_domain(port);
>  	intel_encoder->port = port;
>  	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 8f769e9b9342..737de251d0f8 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10579,7 +10579,7 @@ static const char * const output_type_str[] = {
>  	OUTPUT_TYPE(DP),
>  	OUTPUT_TYPE(EDP),
>  	OUTPUT_TYPE(DSI),
> -	OUTPUT_TYPE(UNKNOWN),
> +	OUTPUT_TYPE(DDI),
>  	OUTPUT_TYPE(DP_MST),
>  };
>  
> @@ -10750,7 +10750,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
>  
>  		switch (encoder->type) {
>  			unsigned int port_mask;
> -		case INTEL_OUTPUT_UNKNOWN:
> +		case INTEL_OUTPUT_DDI:
>  			if (WARN_ON(!HAS_DDI(to_i915(dev))))
>  				break;
>  		case INTEL_OUTPUT_DP:
> @@ -10883,7 +10883,12 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
>  		 * Determine output_types before calling the .compute_config()
>  		 * hooks so that the hooks can use this information safely.
>  		 */
> -		pipe_config->output_types |= 1 << encoder->type;
> +		if (encoder->compute_output_type)
> +			pipe_config->output_types |=
> +				BIT(encoder->compute_output_type(encoder, pipe_config,
> +								 connector_state));
> +		else
> +			pipe_config->output_types |= BIT(encoder->type);
>  	}
>  
>  encoder_retry:
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 30688a5d680d..f0c49962ffbe 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -758,11 +758,16 @@ void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
>  		struct intel_dp *intel_dp;
>  
>  		if (encoder->type != INTEL_OUTPUT_DP &&
> -		    encoder->type != INTEL_OUTPUT_EDP)
> +		    encoder->type != INTEL_OUTPUT_EDP &&
> +		    encoder->type != INTEL_OUTPUT_DDI)
>  			continue;
>  
>  		intel_dp = enc_to_intel_dp(&encoder->base);
>  
> +		/* Skip pure DVI/HDMI DDI encoders */
> +		if (!i915_mmio_reg_valid(intel_dp->output_reg))
> +			continue;
> +
>  		WARN_ON(intel_dp->active_pipe != INVALID_PIPE);
>  
>  		if (encoder->type != INTEL_OUTPUT_EDP)
> @@ -4733,8 +4738,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
>  {
>  	struct drm_connector *connector = &intel_connector->base;
>  	struct intel_dp *intel_dp = intel_attached_dp(connector);
> -	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> -	struct intel_encoder *intel_encoder = &intel_dig_port->base;
>  	struct drm_device *dev = connector->dev;
>  	enum drm_connector_status status;
>  	u8 sink_irq_vector = 0;
> @@ -4767,9 +4770,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
>  		goto out;
>  	}
>  
> -	if (intel_encoder->type != INTEL_OUTPUT_EDP)
> -		intel_encoder->type = INTEL_OUTPUT_DP;
> -
>  	if (intel_dp->reset_link_params) {
>  		/* Initial max link lane count */
>  		intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
> @@ -4886,9 +4886,6 @@ intel_dp_force(struct drm_connector *connector)
>  	intel_dp_set_edid(intel_dp);
>  
>  	intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> -
> -	if (intel_encoder->type != INTEL_OUTPUT_EDP)
> -		intel_encoder->type = INTEL_OUTPUT_DP;
>  }
>  
>  static int intel_dp_get_modes(struct drm_connector *connector)
> @@ -5107,10 +5104,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	enum irqreturn ret = IRQ_NONE;
>  
> -	if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
> -	    intel_dig_port->base.type != INTEL_OUTPUT_HDMI)
> -		intel_dig_port->base.type = INTEL_OUTPUT_DP;
> -
>  	if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
>  		/*
>  		 * vdd off can generate a long pulse on eDP which
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index df966427232c..629ebc73bb09 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -173,7 +173,7 @@ enum intel_output_type {
>  	INTEL_OUTPUT_DP = 7,
>  	INTEL_OUTPUT_EDP = 8,
>  	INTEL_OUTPUT_DSI = 9,
> -	INTEL_OUTPUT_UNKNOWN = 10,
> +	INTEL_OUTPUT_DDI = 10,
>  	INTEL_OUTPUT_DP_MST = 11,
>  };
>  
> @@ -216,6 +216,9 @@ struct intel_encoder {
>  	enum port port;
>  	unsigned int cloneable;
>  	void (*hot_plug)(struct intel_encoder *);
> +	enum intel_output_type (*compute_output_type)(struct intel_encoder *,
> +						      struct intel_crtc_state *,
> +						      struct drm_connector_state *);
>  	bool (*compute_config)(struct intel_encoder *,
>  			       struct intel_crtc_state *,
>  			       struct drm_connector_state *);
> @@ -1152,7 +1155,7 @@ enc_to_dig_port(struct drm_encoder *encoder)
>  	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
>  
>  	switch (intel_encoder->type) {
> -	case INTEL_OUTPUT_UNKNOWN:
> +	case INTEL_OUTPUT_DDI:
>  		WARN_ON(!HAS_DDI(to_i915(encoder->dev)));
>  	case INTEL_OUTPUT_DP:
>  	case INTEL_OUTPUT_EDP:
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 97d08cda3f8e..dede2898cb8a 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1617,12 +1617,9 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
>  
>  	intel_hdmi_unset_edid(connector);
>  
> -	if (intel_hdmi_set_edid(connector)) {
> -		struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> -
> -		hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;
> +	if (intel_hdmi_set_edid(connector))
>  		status = connector_status_connected;
> -	} else
> +	else
>  		status = connector_status_disconnected;
>  
>  	intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
> @@ -1633,8 +1630,6 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
>  static void
>  intel_hdmi_force(struct drm_connector *connector)
>  {
> -	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> -
>  	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
>  		      connector->base.id, connector->name);
>  
> @@ -1644,7 +1639,6 @@ intel_hdmi_force(struct drm_connector *connector)
>  		return;
>  
>  	intel_hdmi_set_edid(connector);
> -	hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;
>  }
>  
>  static int intel_hdmi_get_modes(struct drm_connector *connector)
> diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
> index 1d946240e55f..39714be3eb6b 100644
> --- a/drivers/gpu/drm/i915/intel_opregion.c
> +++ b/drivers/gpu/drm/i915/intel_opregion.c
> @@ -383,7 +383,7 @@ int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
>  	case INTEL_OUTPUT_ANALOG:
>  		type = DISPLAY_TYPE_CRT;
>  		break;
> -	case INTEL_OUTPUT_UNKNOWN:
> +	case INTEL_OUTPUT_DDI:
>  	case INTEL_OUTPUT_DP:
>  	case INTEL_OUTPUT_HDMI:
>  	case INTEL_OUTPUT_DP_MST:


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux