Quoting Ville Syrjala (2017-10-09 17:19:50)
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Reuse the normal state readout code to get the fixed mode for LVDS/DVO
> encoders. This removes some partially duplicated state readout code
> from LVDS/DVO encoders. The duplicated code wasn't actually even
> populating the negative h/vsync flags, leading to possible state checker
> complaints. The normal readout code populates that stuff fully.
>
> Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_display.c | 50 +++++++++++++++++-------------------
> drivers/gpu/drm/i915/intel_drv.h | 5 ++--
> drivers/gpu/drm/i915/intel_dvo.c | 33 ++++++------------------
> drivers/gpu/drm/i915/intel_lvds.c | 18 ++++---------
> 4 files changed, 39 insertions(+), 67 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 15844bf92434..f8693374955c 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10247,48 +10247,44 @@ static void ironlake_pch_clock_get(struct intel_crtc *crtc,
> &pipe_config->fdi_m_n);
> }
>
> -/** Returns the currently programmed mode of the given pipe. */
> -struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
> - struct drm_crtc *crtc)
> +/* Returns the currently programmed mode of the given encoder. */
> +struct drm_display_mode *
> +intel_encoder_current_mode(struct intel_encoder *encoder)
> {
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_crtc_state *crtc_state;
> struct drm_display_mode *mode;
> - struct intel_crtc_state *pipe_config;
> - enum pipe pipe = intel_crtc->pipe;
> + struct intel_crtc *crtc;
> + enum pipe pipe;
> +
> + if (!encoder->get_hw_state(encoder, &pipe))
> + return NULL;
There's no chance that get_hw_state can return a pipe beyond our
knowledge? I'm presuming we are part of the early hw setup here, so may
not have sanitized everything?
> +
> + crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
>
> mode = kzalloc(sizeof(*mode), GFP_KERNEL);
> if (!mode)
> return NULL;
>
> - pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
> - if (!pipe_config) {
> + crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
> + if (!crtc_state) {
> kfree(mode);
> return NULL;
> }
>
> - /*
> - * Construct a pipe_config sufficient for getting the clock info
> - * back out of crtc_clock_get.
> - *
> - * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
> - * to use a real value here instead.
> - */
> - pipe_config->cpu_transcoder = (enum transcoder) pipe;
> - pipe_config->pixel_multiplier = 1;
> - pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(pipe));
> - pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(pipe));
> - pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(pipe));
> - i9xx_crtc_clock_get(intel_crtc, pipe_config);
> + crtc_state->base.crtc = &crtc->base;
>
> - pipe_config->base.adjusted_mode.crtc_clock =
> - pipe_config->port_clock / pipe_config->pixel_multiplier;
> + if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
> + kfree(crtc_state);
> + kfree(mode);
> + return NULL;
> + }
>
> - intel_get_pipe_timings(intel_crtc, pipe_config);
> + encoder->get_config(encoder, crtc_state);
>
> - intel_mode_from_pipe_config(mode, pipe_config);
> + intel_mode_from_pipe_config(mode, crtc_state);
>
> - kfree(pipe_config);
> + kfree(crtc_state);
This all looks consistent to my eyes.
>
> return mode;
> }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 0cab667fff57..b57a691409c4 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1363,8 +1363,9 @@ struct intel_connector *intel_connector_alloc(void);
> bool intel_connector_get_hw_state(struct intel_connector *connector);
> void intel_connector_attach_encoder(struct intel_connector *connector,
> struct intel_encoder *encoder);
> -struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
> - struct drm_crtc *crtc);
> +struct drm_display_mode *
> +intel_encoder_current_mode(struct intel_encoder *encoder);
> +
> enum pipe intel_get_pipe_from_connector(struct intel_connector *connector);
> int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
> struct drm_file *file_priv);
> diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
> index 5c562e1f56ae..53c9b763f4ce 100644
> --- a/drivers/gpu/drm/i915/intel_dvo.c
> +++ b/drivers/gpu/drm/i915/intel_dvo.c
> @@ -379,32 +379,15 @@ static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
> * chip being on DVOB/C and having multiple pipes.
> */
> static struct drm_display_mode *
> -intel_dvo_get_current_mode(struct drm_connector *connector)
> +intel_dvo_get_current_mode(struct intel_encoder *encoder)
> {
> - struct drm_device *dev = connector->dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
> - uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
> - struct drm_display_mode *mode = NULL;
> + struct drm_display_mode *mode;
>
> - /* If the DVO port is active, that'll be the LVDS, so we can pull out
> - * its timings to get how the BIOS set up the panel.
> - */
> - if (dvo_val & DVO_ENABLE) {
> - struct intel_crtc *crtc;
> - int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
> -
> - crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> - if (crtc) {
> - mode = intel_crtc_mode_get(dev, &crtc->base);
> - if (mode) {
> - mode->type |= DRM_MODE_TYPE_PREFERRED;
> - if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
> - mode->flags |= DRM_MODE_FLAG_PHSYNC;
> - if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
> - mode->flags |= DRM_MODE_FLAG_PVSYNC;
> - }
> - }
> + mode = intel_encoder_current_mode(encoder);
Ok.
> + if (mode) {
> + DRM_DEBUG_KMS("using current (BIOS) mode: ");
> + drm_mode_debug_printmodeline(mode);
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> }
>
> return mode;
> @@ -551,7 +534,7 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
> * mode being output through DVO.
> */
> intel_panel_init(&intel_connector->panel,
> - intel_dvo_get_current_mode(connector),
> + intel_dvo_get_current_mode(intel_encoder),
> NULL, NULL);
> intel_dvo->panel_wants_dither = true;
> }
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index a55954a89148..c5072b951b9c 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -939,10 +939,8 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
> struct drm_display_mode *fixed_mode = NULL;
> struct drm_display_mode *downclock_mode = NULL;
> struct edid *edid;
> - struct intel_crtc *crtc;
> i915_reg_t lvds_reg;
> u32 lvds;
> - int pipe;
> u8 pin;
> u32 allowed_scalers;
>
> @@ -1118,17 +1116,11 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
> if (HAS_PCH_SPLIT(dev_priv))
> goto failed;
>
> - pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
> - crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> -
> - if (crtc && (lvds & LVDS_PORT_EN)) {
> - fixed_mode = intel_crtc_mode_get(dev, &crtc->base);
> - if (fixed_mode) {
> - DRM_DEBUG_KMS("using current (BIOS) mode: ");
> - drm_mode_debug_printmodeline(fixed_mode);
> - fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> - goto out;
> - }
> + fixed_mode = intel_encoder_current_mode(intel_encoder);
> + if (fixed_mode) {
> + DRM_DEBUG_KMS("using current (BIOS) mode: ");
> + drm_mode_debug_printmodeline(fixed_mode);
> + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> }
>
> /* If we still don't have a mode after all that, give up. */
Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
I will give it a spin shortly (give or take compilation times on a slow
machine and forgetfulness).
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
