This is heavily based on a initial patch provided by Ville
plus all changes provided later by Ander.
As Geminilake, Cannonlake also supports 2 pixels per clock.
Different from Geminilake we are not implementing the 99% Wa.
But we can revisit that decision later if we find out
any limitation on later CNL SKUs.
v2: Rebase on top of commit 'd305e0614601 ("drm/i915: Track
minimum acceptable cdclk instead of "minimum dotclock")'
v3: When fixing HDMI on CNL I noticed that I missed to convert
back the doubled pixel rate to cdclk.
Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_cdclk.c | 14 ++------------
drivers/gpu/drm/i915/intel_display.c | 2 +-
drivers/gpu/drm/i915/intel_pm.c | 3 ++-
3 files changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 58ee4dd07cf6..bdb95b75c9d4 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1793,12 +1793,7 @@ static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
int pixel_rate)
{
if (INTEL_GEN(dev_priv) >= 10)
- /*
- * FIXME: Switch to DIV_ROUND_UP(pixel_rate, 2)
- * once DDI clock voltage requirements are
- * handled correctly.
- */
- return pixel_rate;
+ return DIV_ROUND_UP(pixel_rate, 2);
else if (IS_GEMINILAKE(dev_priv))
/*
* FIXME: Avoid using a pixel clock that is more than 99% of the cdclk
@@ -2057,12 +2052,7 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
int max_cdclk_freq = dev_priv->max_cdclk_freq;
if (INTEL_GEN(dev_priv) >= 10)
- /*
- * FIXME: Allow '2 * max_cdclk_freq'
- * once DDI clock voltage requirements are
- * handled correctly.
- */
- return max_cdclk_freq;
+ return 2 * max_cdclk_freq;
else if (IS_GEMINILAKE(dev_priv))
/*
* FIXME: Limiting to 99% as a temporary workaround. See
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b7a6ddc6a66d..644759aff069 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12827,7 +12827,7 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state
crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
max_dotclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk;
- if (IS_GEMINILAKE(dev_priv))
+ if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
max_dotclk *= 2;
if (WARN_ON_ONCE(!crtc_clock || max_dotclk < crtc_clock))
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 171b21f6c4ad..ede871b7982e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3932,6 +3932,7 @@ skl_pipe_downscale_amount(const struct intel_crtc_state *crtc_state)
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
struct intel_crtc_state *cstate)
{
+ struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
struct drm_crtc_state *crtc_state = &cstate->base;
struct drm_atomic_state *state = crtc_state->state;
struct drm_plane *plane;
@@ -3974,7 +3975,7 @@ int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
crtc_clock = crtc_state->adjusted_mode.crtc_clock;
dotclk = to_intel_atomic_state(state)->cdclk.logical.cdclk;
- if (IS_GEMINILAKE(to_i915(intel_crtc->base.dev)))
+ if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
dotclk *= 2;
pipe_max_pixel_rate = div_round_up_u32_fixed16(dotclk, pipe_downscale);
--
2.13.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
