This is prep work for refactoring VBT definitions.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
tools/intel_bios.h | 268 -----------------------------------------------------
1 file changed, 268 deletions(-)
diff --git a/tools/intel_bios.h b/tools/intel_bios.h
index f2ccb55ab6c3..c998031041fd 100644
--- a/tools/intel_bios.h
+++ b/tools/intel_bios.h
@@ -132,20 +132,6 @@ struct bdb_general_features {
unsigned char rsvd11:2; /* finish byte */
} __attribute__ ((packed));
-#define GPIO_PIN_NONE 0x00 /* "N/A" */
-#define GPIO_PIN_I2C 0x01 /* "I2C GPIO pins" */
-#define GPIO_PIN_CRT_DDC 0x02 /* "Analog CRT DDC GPIO pins" */
-/* 915+ */
-#define GPIO_PIN_LVDS 0x03 /* "Integrated LVDS DDC GPIO pins" */
-#define GPIO_PIN_SDVO_I2C 0x05 /* "sDVO I2C GPIO pins" */
-#define GPIO_PIN_SDVO_DDC1 0x1D /* "SDVO DDC1 GPIO pins" */
-#define GPIO_PIN_SDVO_DDC2 0x2D /* "SDVO DDC2 GPIO pins" */
-/* pre-915 */
-#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */
-#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */
-#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */
-#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */
-
#define DEVICE_HANDLE_CRT 0x01
#define DEVICE_HANDLE_EFP1 0x04
#define DEVICE_HANDLE_EFP2 0x40
@@ -211,26 +197,6 @@ struct bdb_general_features {
#define DEVICE_TYPE_eDP 0x78C6
#define DEVICE_TYPE_MIPI 0x7cc2
-#define DEVICE_CFG_NONE 0x00
-#define DEVICE_CFG_12BIT_DVOB 0x01
-#define DEVICE_CFG_12BIT_DVOC 0x02
-#define DEVICE_CFG_24BIT_DVOBC 0x09
-#define DEVICE_CFG_24BIT_DVOCB 0x0a
-#define DEVICE_CFG_DUAL_DVOB 0x11
-#define DEVICE_CFG_DUAL_DVOC 0x12
-#define DEVICE_CFG_DUAL_DVOBC 0x13
-#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19
-#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a
-
-#define DEVICE_WIRE_NONE 0x00
-#define DEVICE_WIRE_DVOB 0x01
-#define DEVICE_WIRE_DVOC 0x02
-#define DEVICE_WIRE_DVOBC 0x03
-#define DEVICE_WIRE_DVOBB 0x05
-#define DEVICE_WIRE_DVOCC 0x06
-#define DEVICE_WIRE_DVOB_MASTER 0x0d
-#define DEVICE_WIRE_DVOC_MASTER 0x0e
-
#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
#define DEVICE_PORT_DVOB 0x01
#define DEVICE_PORT_DVOC 0x02
@@ -243,11 +209,6 @@ struct bdb_general_features {
#define DEVICE_PORT_DPC 8
#define DEVICE_PORT_DPD 9
-#define DEVICE_INFO_NONE 0
-#define DEVICE_INFO_HDMI_CERT 1
-#define DEVICE_INFO_DP 2
-#define DEVICE_INFO_DVI 3
-
struct child_device_config {
uint16_t handle;
uint16_t device_type; /* See DEVICE_TYPE_* above */
@@ -370,16 +331,6 @@ struct bdb_lvds_options {
uint8_t rsvd4;
} __attribute__ ((packed));
-/* 915+ only */
-struct bdb_tv_features {
- /* need to verify bit ordering */
- uint16_t under_over_scan_via_yprpb:2;
- uint16_t rsvd1:10;
- uint16_t under_over_scan_via_dvi:2;
- uint16_t add_overscan_mode:1;
- uint16_t rsvd2:1;
-} __attribute__ ((packed));
-
struct lvds_fp_timing {
uint16_t x_res;
uint16_t y_res;
@@ -476,79 +427,6 @@ struct bdb_lvds_lfp_data {
struct bdb_lvds_lfp_data_entry data[16];
} __attribute__ ((packed));
-#define BACKLIGHT_TYPE_NONE 0
-#define BACKLIGHT_TYPE_I2C 1
-#define BACKLIGHT_TYPE_PWM 2
-
-#define BACKLIGHT_GMBUS_100KHZ 0
-#define BACKLIGHT_GMBUS_50KHZ 1
-#define BACKLIGHT_GMBUS_400KHZ 2
-#define BACKLIGHT_GMBUS_1MHZ 3
-
-struct backlight_info {
- uint8_t inverter_type:2; /* see BACKLIGHT_TYPE_* above */
- uint8_t inverter_polarity:1; /* 1 means 0 is max, 255 is min */
- uint8_t gpio_pins:3; /* see GPIO_PIN_* above */
- uint8_t gmbus_speed:2;
- uint16_t pwm_frequency; /* in Hz */
- uint8_t min_brightness;
- /* Next two are only for 915+ systems */
- uint8_t i2c_addr;
- uint8_t i2c_cmd;
-} __attribute((packed));
-
-struct bdb_backlight_control {
- uint8_t row_size;
- struct backlight_info lfps[16];
-} __attribute__ ((packed));
-
-struct bdb_bia {
- uint8_t bia_enable:1;
- uint8_t bia_level:3;
- uint8_t rsvd1:3;
- uint8_t als_enable:1;
- uint8_t als_response_data[20];
-} __attribute((packed));
-
-struct aimdb_header {
- char signature[16];
- char oem_device[20];
- uint16_t aimdb_version;
- uint16_t aimdb_header_size;
- uint16_t aimdb_size;
-} __attribute__ ((packed));
-
-struct aimdb_block {
- uint8_t aimdb_id;
- uint16_t aimdb_size;
-} __attribute__ ((packed));
-
-struct vch_panel_data {
- uint16_t fp_timing_offset;
- uint8_t fp_timing_size;
- uint16_t dvo_timing_offset;
- uint8_t dvo_timing_size;
- uint16_t text_fitting_offset;
- uint8_t text_fitting_size;
- uint16_t graphics_fitting_offset;
- uint8_t graphics_fitting_size;
-} __attribute__ ((packed));
-
-struct vch_bdb_22 {
- struct aimdb_block aimdb_block;
- struct vch_panel_data panels[16];
-} __attribute__ ((packed));
-
-#define BLC_INVERTER_TYPE_NONE 0
-#define BLC_INVERTER_TYPE_I2C 1
-#define BLC_INVERTER_TYPE_PWM 2
-
-#define BLC_GPIO_NONE 0
-#define BLC_GPIO_I2C 1
-#define BLC_GPIO_CRT_DDC 2
-#define BLC_GPIO_DVI_DDC 3
-#define BLC_GPIO_SDVO_I2C 5
-
struct blc_struct {
uint8_t inverter_type:2;
uint8_t inverter_polarity:1; /* 1 means inverted (0 = max brightness) */
@@ -565,18 +443,6 @@ struct bdb_lvds_backlight {
struct blc_struct panels[16];
} __attribute__ ((packed));
-struct bdb_lvds_power {
- uint8_t dpst_enabled:1;
- uint8_t pwr_prefs:3;
- uint8_t rsvd1:3;
- uint8_t als_enabled:1;
- uint16_t als_backlight1;
- uint16_t als_backlight2;
- uint16_t als_backlight3;
- uint16_t als_backlight4;
- uint16_t als_backlight5;
-} __attribute__ ((packed));
-
#define BDB_DRIVER_NO_LVDS 0
#define BDB_DRIVER_INT_LVDS 1
#define BDB_DRIVER_SDVO_LVDS 2
@@ -871,138 +737,4 @@ enum mipi_seq_element {
MIPI_SEQ_ELEM_MAX
};
-/*
- * Driver<->VBIOS interaction occurs through scratch bits in
- * GR18 & SWF*.
- *
- * The VBIOS/firmware will signal to the gfx driver through the ASLE interrupt
- * (visible in the interupt regs at bit 0) when it wants something done.
- *
- * Pre-965:
- * The gfx driver can make calls to the VBIOS/firmware through an SMI request,
- * generated by writing to offset 0xe0 of the device's config space (see the
- * publically available 915 PRM for details).
- *
- * 965 and above:
- * IGD OpRegion requests to the VBIOS/firmware are made using SWSCI, which can
- * be triggered by writing to offset 0xe4 (see the publically available
- * 965 graphics PRM for details).
- */
-
-/* GR18 bits are set on display switch and hotkey events */
-#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
-#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
-#define GR18_HK_NONE (0x0<<3)
-#define GR18_HK_LFP_STRETCH (0x1<<3)
-#define GR18_HK_TOGGLE_DISP (0x2<<3)
-#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
-#define GR18_HK_POPUP_DISABLED (0x6<<3)
-#define GR18_HK_POPUP_ENABLED (0x7<<3)
-#define GR18_HK_PFIT (0x8<<3)
-#define GR18_HK_APM_CHANGE (0xa<<3)
-#define GR18_HK_MULTIPLE (0xc<<3)
-#define GR18_USER_INT_EN (1<<2)
-#define GR18_A0000_FLUSH_EN (1<<1)
-#define GR18_SMM_EN (1<<0)
-
-/* Set by driver, cleared by VBIOS */
-#define SWF00_YRES_SHIFT 16
-#define SWF00_XRES_SHIFT 0
-#define SWF00_RES_MASK 0xffff
-
-/* Set by VBIOS at boot time and driver at runtime */
-#define SWF01_TV2_FORMAT_SHIFT 8
-#define SWF01_TV1_FORMAT_SHIFT 0
-#define SWF01_TV_FORMAT_MASK 0xffff
-
-#define SWF10_VBIOS_BLC_I2C_EN (1<<29)
-#define SWF10_GTT_OVERRIDE_EN (1<<28)
-#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
-#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
-#define SWF10_OLD_TOGGLE 0x0
-#define SWF10_TOGGLE_LIST_1 0x1
-#define SWF10_TOGGLE_LIST_2 0x2
-#define SWF10_TOGGLE_LIST_3 0x3
-#define SWF10_TOGGLE_LIST_4 0x4
-#define SWF10_PANNING_EN (1<<23)
-#define SWF10_DRIVER_LOADED (1<<22)
-#define SWF10_EXTENDED_DESKTOP (1<<21)
-#define SWF10_EXCLUSIVE_MODE (1<<20)
-#define SWF10_OVERLAY_EN (1<<19)
-#define SWF10_PLANEB_HOLDOFF (1<<18)
-#define SWF10_PLANEA_HOLDOFF (1<<17)
-#define SWF10_VGA_HOLDOFF (1<<16)
-#define SWF10_ACTIVE_DISP_MASK 0xffff
-#define SWF10_PIPEB_LFP2 (1<<15)
-#define SWF10_PIPEB_EFP2 (1<<14)
-#define SWF10_PIPEB_TV2 (1<<13)
-#define SWF10_PIPEB_CRT2 (1<<12)
-#define SWF10_PIPEB_LFP (1<<11)
-#define SWF10_PIPEB_EFP (1<<10)
-#define SWF10_PIPEB_TV (1<<9)
-#define SWF10_PIPEB_CRT (1<<8)
-#define SWF10_PIPEA_LFP2 (1<<7)
-#define SWF10_PIPEA_EFP2 (1<<6)
-#define SWF10_PIPEA_TV2 (1<<5)
-#define SWF10_PIPEA_CRT2 (1<<4)
-#define SWF10_PIPEA_LFP (1<<3)
-#define SWF10_PIPEA_EFP (1<<2)
-#define SWF10_PIPEA_TV (1<<1)
-#define SWF10_PIPEA_CRT (1<<0)
-
-#define SWF11_MEMORY_SIZE_SHIFT 16
-#define SWF11_SV_TEST_EN (1<<15)
-#define SWF11_IS_AGP (1<<14)
-#define SWF11_DISPLAY_HOLDOFF (1<<13)
-#define SWF11_DPMS_REDUCED (1<<12)
-#define SWF11_IS_VBE_MODE (1<<11)
-#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
-#define SWF11_DPMS_MASK 0x07
-#define SWF11_DPMS_OFF (1<<2)
-#define SWF11_DPMS_SUSPEND (1<<1)
-#define SWF11_DPMS_STANDBY (1<<0)
-#define SWF11_DPMS_ON 0
-
-#define SWF14_GFX_PFIT_EN (1<<31)
-#define SWF14_TEXT_PFIT_EN (1<<30)
-#define SWF14_LID_SWITCH_EN (1<<29)
-#define SWF14_POPUP_EN (1<<28)
-#define SWF14_DISPLAY_HOLDOFF (1<<27)
-#define SWF14_DISP_DETECT_EN (1<<26)
-#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
-#define SWF14_DRIVER_STATUS (1<<24)
-#define SWF14_OS_TYPE_WIN9X (1<<23)
-#define SWF14_OS_TYPE_WINNT (1<<22)
-/* 21:19 rsvd */
-#define SWF14_PM_TYPE_MASK 0x00070000
-#define SWF14_PM_ACPI_VIDEO (0x4 << 16)
-#define SWF14_PM_ACPI (0x3 << 16)
-#define SWF14_PM_APM_12 (0x2 << 16)
-#define SWF14_PM_APM_11 (0x1 << 16)
-#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
- /* if GR18 indicates a display switch */
-#define SWF14_DS_PIPEB_LFP2_EN (1<<15)
-#define SWF14_DS_PIPEB_EFP2_EN (1<<14)
-#define SWF14_DS_PIPEB_TV2_EN (1<<13)
-#define SWF14_DS_PIPEB_CRT2_EN (1<<12)
-#define SWF14_DS_PIPEB_LFP_EN (1<<11)
-#define SWF14_DS_PIPEB_EFP_EN (1<<10)
-#define SWF14_DS_PIPEB_TV_EN (1<<9)
-#define SWF14_DS_PIPEB_CRT_EN (1<<8)
-#define SWF14_DS_PIPEA_LFP2_EN (1<<7)
-#define SWF14_DS_PIPEA_EFP2_EN (1<<6)
-#define SWF14_DS_PIPEA_TV2_EN (1<<5)
-#define SWF14_DS_PIPEA_CRT2_EN (1<<4)
-#define SWF14_DS_PIPEA_LFP_EN (1<<3)
-#define SWF14_DS_PIPEA_EFP_EN (1<<2)
-#define SWF14_DS_PIPEA_TV_EN (1<<1)
-#define SWF14_DS_PIPEA_CRT_EN (1<<0)
- /* if GR18 indicates a panel fitting request */
-#define SWF14_PFIT_EN (1<<0) /* 0 means disable */
- /* if GR18 indicates an APM change request */
-#define SWF14_APM_HIBERNATE 0x4
-#define SWF14_APM_SUSPEND 0x3
-#define SWF14_APM_STANDBY 0x1
-#define SWF14_APM_RESTORE 0x0
-
#endif /* _INTEL_BIOS_H_ */
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
