From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently
made some bad decisions that changed the logic of the
code. (Noticed by Manesh, updated by Rodrigo).
Cc: Mahesh Kumar <mahesh1.kumar@xxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 66495ad36973..ed662937ec3c 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4290,8 +4290,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
* should allow pixel_rate up to ~2 GHz which seems sufficient since max
* 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
*/
-static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
- uint32_t latency)
+static uint_fixed_16_16_t
+skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
+ uint8_t cpp, uint32_t latency)
{
uint32_t wm_intermediate_val;
uint_fixed_16_16_t ret;
@@ -4301,6 +4302,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
wm_intermediate_val = latency * pixel_rate * cpp;
ret = div_fixed16(wm_intermediate_val, 1000 * 512);
+
+ if (INTEL_GEN(dev_priv) >= 10)
+ ret = add_fixed16_u32(ret, 1);
+
return ret;
}
@@ -4456,9 +4461,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
if (y_tiled) {
interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
y_min_scanlines, 512);
+
+ if (INTEL_GEN(dev_priv) >= 10)
+ interm_pbpl++;
+
plane_blocks_per_line = div_fixed16(interm_pbpl,
y_min_scanlines);
- } else if (x_tiled) {
+ } else if (x_tiled && INTEL_GEN(dev_priv) == 9) {
interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512);
plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
} else {
@@ -4466,7 +4475,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
}
- method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
+ method1 = skl_wm_method1(dev_priv, plane_pixel_rate, cpp, latency);
method2 = skl_wm_method2(plane_pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
latency,
--
2.13.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
