[PATCH] drm/i915: Use AUX for backlight only if eDP 1.4 or later

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With older panels, AUX pin for backlight doesn't work. On some
panels, this causes backlight issues on S3 resume. Enable the
feature only for eDP1.4 or later.

Fix-suggested-by: Puthikorn Voravootivat <puthik@xxxxxxxxxxxx>
Signed-off-by: Jenny TC <jenny.tc@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
index b25cd88..421f31f 100644
--- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
  * via PWM pin or using AUX is better than using PWM pin.
  *
  * The heuristic to determine that using AUX pin is better than using PWM pin is
- * that the panel support any of the feature list here.
+ * that the panel is eDP 1.4 or later and support any of the feature list here
  * - Regional backlight brightness adjustment
  * - Backlight PWM frequency set
  * - More than 8 bits resolution of brightness level
@@ -310,6 +310,10 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
 	if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))
 		return true;
 
+	/* Enable this for eDP 1.4 panel or later. */
+	if (intel_dp->edp_dpcd[0] < DP_EDP_14)
+		return false;
+
 	/* Panel supports regional backlight brightness adjustment */
 	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_GENERAL_CAP_3,
 			      &reg_val) != 1) {
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux