On SKL+ there is a bit in SRD_CTL that software is not supposed to
modify, but we currently clobber that bit when we enable PSR. In
order to preserve the value of that bit, go ahead and read SRD_CTL and
do a field-wise setting of the various bits that we need to initialize
before writing the register back out. Additionally, go ahead and
explicitly disable single-frame update since we aren't currently
supporting it.
v2: * Do a field-wise init on EDP_PSR_MAX_SLEEP_TIME even though we
always set it to the max value. (Rodrigo)
* Rebase
v3-v4: * Rebase
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Cc: Wayne Boyer <wayne.boyer@xxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Signed-off-by: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
drivers/gpu/drm/i915/intel_psr.c | 21 +++++++++++++++++++--
2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c712d01..3e62429 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3789,18 +3789,22 @@ enum {
#define EDP_PSR_MIN_LINK_ENTRY_TIME_4_LINES (1<<25)
#define EDP_PSR_MIN_LINK_ENTRY_TIME_2_LINES (2<<25)
#define EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES (3<<25)
+#define EDP_PSR_MAX_SLEEP_TIME_MASK (0x1f<<20)
#define EDP_PSR_MAX_SLEEP_TIME_SHIFT 20
#define EDP_PSR_SKIP_AUX_EXIT (1<<12)
#define EDP_PSR_TP1_TP2_SEL (0<<11)
#define EDP_PSR_TP1_TP3_SEL (1<<11)
+#define EDP_PSR_TP2_TP3_TIME_MASK (3<<8)
#define EDP_PSR_TP2_TP3_TIME_500us (0<<8)
#define EDP_PSR_TP2_TP3_TIME_100us (1<<8)
#define EDP_PSR_TP2_TP3_TIME_2500us (2<<8)
#define EDP_PSR_TP2_TP3_TIME_0us (3<<8)
+#define EDP_PSR_TP1_TIME_MASK (0x3<<4)
#define EDP_PSR_TP1_TIME_500us (0<<4)
#define EDP_PSR_TP1_TIME_100us (1<<4)
#define EDP_PSR_TP1_TIME_2500us (2<<4)
#define EDP_PSR_TP1_TIME_0us (3<<4)
+#define EDP_PSR_IDLE_FRAME_MASK (0xf<<0)
#define EDP_PSR_IDLE_FRAME_SHIFT 0
#define EDP_PSR_AUX_CTL _MMIO(dev_priv->psr_mmio_base + 0x10)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 559f1ab..132987b 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -280,17 +280,32 @@ static void intel_enable_source_psr1(struct intel_dp *intel_dp)
* with the 5 or 6 idle patterns.
*/
uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
- uint32_t val = EDP_PSR_ENABLE;
+ uint32_t val = I915_READ(EDP_PSR_CTL);
+ val |= EDP_PSR_ENABLE;
+
+ val &= ~EDP_PSR_MAX_SLEEP_TIME_MASK;
val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT;
+
+ val &= ~EDP_PSR_IDLE_FRAME_MASK;
val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
+ val &= ~EDP_PSR_MIN_LINK_ENTRY_TIME_MASK;
if (IS_HASWELL(dev_priv))
val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
- if (dev_priv->psr.link_standby)
+ if (dev_priv->psr.link_standby) {
val |= EDP_PSR_LINK_STANDBY;
+ /* SFU should only be enabled with link standby, but for
+ * now we do not support it. */
+ val &= ~BDW_PSR_SINGLE_FRAME;
+ } else {
+ val &= ~EDP_PSR_LINK_STANDBY;
+ val &= ~BDW_PSR_SINGLE_FRAME;
+ }
+
+ val &= ~EDP_PSR_TP1_TIME_MASK;
if (dev_priv->vbt.psr.tp1_wakeup_time > 5)
val |= EDP_PSR_TP1_TIME_2500us;
else if (dev_priv->vbt.psr.tp1_wakeup_time > 1)
@@ -300,6 +315,7 @@ static void intel_enable_source_psr1(struct intel_dp *intel_dp)
else
val |= EDP_PSR_TP1_TIME_0us;
+ val &= ~EDP_PSR_TP2_TP3_TIME_MASK;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR_TP2_TP3_TIME_2500us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
@@ -309,6 +325,7 @@ static void intel_enable_source_psr1(struct intel_dp *intel_dp)
else
val |= EDP_PSR_TP2_TP3_TIME_0us;
+ val &= ~EDP_PSR_TP1_TP3_SEL;
if (intel_dp_source_supports_hbr2(intel_dp) &&
drm_dp_tps3_supported(intel_dp->dpcd))
val |= EDP_PSR_TP1_TP3_SEL;
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
