Re: [PATCH v2 12/14] drm/i915: prepare csc unit for YCBCR420 output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Regards

Shashank


On 7/15/2017 12:06 AM, Ville Syrjälä wrote:
On Thu, Jul 13, 2017 at 09:03:18PM +0530, Shashank Sharma wrote:
To support ycbcr output, we need a pipe CSC block to do
RGB->YCBCR conversion.

Current Intel platforms have only one pipe CSC unit, so
we can either do color correction using it, or we can perform
RGB->YCBCR conversion.

This function adds a csc handler, which uses recommended bspec
values to perform RGB->YCBCR conversion (target color space BT709)

V2: Rebase
V3: Rebase
V4: Rebase
V5: Addressed review comments from Ander
     - Remove extra line added in the patch
     - Add the spec details in the commit message
     - Combine two if(cond) while calling intel_crtc_compute_config
V6: Handle YCBCR420 outputs only (Ville)
V7: Addressed review comments from Ville:
     - Add description about target colorspace
     - Remove the comments from CSC function
     - DRM_DEBUG->DEBUG_KMS for atomic failure due to CSC unit busy
     - Remove unnecessary debug message about YCBCR420 possibe

Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Ander Conselvan de Oliveira <conselvan2@xxxxxxxxx>

Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
---
  drivers/gpu/drm/i915/intel_color.c   | 46 +++++++++++++++++++++++++++++++++++-
  drivers/gpu/drm/i915/intel_display.c | 15 ++++++++++++
  2 files changed, 60 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index f85d575..8698691 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -41,6 +41,22 @@
#define LEGACY_LUT_LENGTH (sizeof(struct drm_color_lut) * 256) +/* Post offset values for RGB->YCBCR conversion */
+#define POSTOFF_RGB_TO_YUV_HI 0x800
+#define POSTOFF_RGB_TO_YUV_ME 0x100
+#define POSTOFF_RGB_TO_YUV_LO 0x800
+
+/*
+ * These values are direct register values specified in the Bspec,
+ * for RGB->YUV conversion matrix (colorspace BT709)
+ */
+#define CSC_RGB_TO_YUV_RU_GU 0x2ba809d8
+#define CSC_RGB_TO_YUV_BU 0x37e80000
+#define CSC_RGB_TO_YUV_RY_GY 0x1e089cc0
+#define CSC_RGB_TO_YUV_BY 0xb5280000
+#define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8
+#define CSC_RGB_TO_YUV_BV 0x1e080000
+
  /*
   * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point
   * format). This macro takes the coefficient we want transformed and the
@@ -91,6 +107,31 @@ static void ctm_mult_by_limited(uint64_t *result, int64_t *input)
  	}
  }
+void i9xx_load_ycbcr_conversion_matrix(struct intel_crtc *intel_crtc)
+{
+	int pipe = intel_crtc->pipe;
+	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+
+
+	I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
+	I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
+	I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
+
+	I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), CSC_RGB_TO_YUV_RU_GU);
+	I915_WRITE(PIPE_CSC_COEFF_BU(pipe), CSC_RGB_TO_YUV_BU);
+
+	I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), CSC_RGB_TO_YUV_RY_GY);
+	I915_WRITE(PIPE_CSC_COEFF_BY(pipe), CSC_RGB_TO_YUV_BY);
+
+	I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), CSC_RGB_TO_YUV_RV_GV);
+	I915_WRITE(PIPE_CSC_COEFF_BV(pipe), CSC_RGB_TO_YUV_BV);
+
+	I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), POSTOFF_RGB_TO_YUV_HI);
+	I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), POSTOFF_RGB_TO_YUV_ME);
+	I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), POSTOFF_RGB_TO_YUV_LO);
+	I915_WRITE(PIPE_CSC_MODE(pipe), 0);
+}
+
  /* Set up the pipe CSC unit. */
  static void i9xx_load_csc_matrix(struct drm_crtc_state *crtc_state)
  {
@@ -101,7 +142,10 @@ static void i9xx_load_csc_matrix(struct drm_crtc_state *crtc_state)
  	uint16_t coeffs[9] = { 0, };
  	struct intel_crtc_state *intel_crtc_state = to_intel_crtc_state(crtc_state);
- if (crtc_state->ctm) {
+	if (intel_crtc_state->ycbcr420) {
+		i9xx_load_ycbcr_conversion_matrix(intel_crtc);
+		return;
+	} else if (crtc_state->ctm) {
  		struct drm_color_ctm *ctm =
  			(struct drm_color_ctm *)crtc_state->ctm->data;
  		uint64_t input[9] = { 0, };
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1a23ec0..9c6a1ed 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6283,6 +6283,21 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
  		return -EINVAL;
  	}
+ /* YCBCR420 feasibility check */
Not a useful comment.
Got it.
+	if (pipe_config->ycbcr420) {
+		struct drm_crtc_state *drm_state = &pipe_config->base;
Having aliasing pointer for the same thing is just annoying.
We do have quite a lot of that going around, but IMO we need
to clean that all up at some point.

So pls just do this instead:

if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
	...
}
Most of the time its done to cover for 80 char limit, and to make code look good.
but let me see if I can accommodate this one.

- Shashank

+
+		/*
+		 * There is only one pipe CSC unit per pipe, and we need that
+		 * for output conversion from RGB->YCBCR. So if CTM is already
+		 * applied we can't support YCBCR420 output.
+		 */
+		if (drm_state->ctm) {
+			DRM_DEBUG_KMS("YCBCR420 and CTM is not possible\n");
+			return -EINVAL;
+		}
+	}
+
  	/*
  	 * Pipe horizontal size must be even in:
  	 * - DVO ganged mode
--
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux