There are still cases on these platforms where an attempt is made to
configure the CDCLK while the power domain is off, like when coming back
from a suspend. So the workaround below is still needed.
This effectively reverts commit 63ff30442519 ("drm/i915: Nuke the
VLV/CHV PFI programming power domain workaround").
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517
Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_cdclk.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index b8914db7d2e1..1241e5891b29 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -491,6 +491,14 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
int cdclk = cdclk_state->cdclk;
u32 val, cmd;
+ /* There are cases where we can end up here with power domains
+ * off and a CDCLK frequency other than the minimum, like when
+ * issuing a modeset without actually changing any display after
+ * a system suspend. So grab the PIPE-A domain, which covers
+ * the HW blocks needed for the following programming.
+ */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+
if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
cmd = 2;
else if (cdclk == 266667)
@@ -549,6 +557,8 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
intel_update_cdclk(dev_priv);
vlv_program_pfi_credits(dev_priv);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
}
static void chv_set_cdclk(struct drm_i915_private *dev_priv,
@@ -568,6 +578,14 @@ static void chv_set_cdclk(struct drm_i915_private *dev_priv,
return;
}
+ /* There are cases where we can end up here with power domains
+ * off and a CDCLK frequency other than the minimum, like when
+ * issuing a modeset without actually changing any display after
+ * a system suspend. So grab the PIPE-A domain, which covers
+ * the HW blocks needed for the following programming.
+ */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+
/*
* Specs are full of misinformation, but testing on actual
* hardware has shown that we just need to write the desired
@@ -590,6 +608,8 @@ static void chv_set_cdclk(struct drm_i915_private *dev_priv,
intel_update_cdclk(dev_priv);
vlv_program_pfi_credits(dev_priv);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
}
static int bdw_calc_cdclk(int max_pixclk)
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
