On Fri, Jun 9, 2017 at 3:27 PM Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> wrote:
From: "Kahola, Mika" <mika.kahola@xxxxxxxxx>
Enable wrpll computation for Cannonlake platform to support
pll's required for HDMI output. The patch contains the following features
- compute Cannonlake port clock programming
dividers P, Q, and K.
- compute PLL parameters for Cannonlake. These parameters
set the values on DPLL registers.
- find the register values to program wrpll for Cannonlake.
The reference clock can be either 19.2MHz or 24MHz.
v2: rebase
v3: squash wrpll patches into one (Rodrigo)
v4: switch order of getting even dividers (Paulo)
update divider register values for PDiv and KDiv (Paulo)
update wrpll computation algorithm (Paulo)
v5: Remove ref clock division by 1000. (Rodrigo)
v6: Rodrigo rebasing on top of latest code.
Signed-off-by: Kahola, Mika <mika.kahola@xxxxxxxxx>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dpll_mgr.c | 140 +++++++++++++++++++++++++++++++++-
1 file changed, 138 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index 903c38d..8e669b6 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -2126,17 +2126,153 @@ static bool cnl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
return ret;
}
+static void cnl_wrpll_get_multipliers(unsigned int bestdiv,
+ unsigned int *pdiv,
+ unsigned int *qdiv,
+ unsigned int *kdiv)
+{
+ /* even dividers */
+ if (bestdiv % 2 == 0) {
+ if (bestdiv == 2) {
+ *pdiv = 2;
+ *qdiv = 1;
+ *kdiv = 1;
+ } else if (bestdiv % 4 == 0) {
+ *pdiv = 2;
+ *qdiv = bestdiv / 4;
+ *kdiv = 2;
+ } else if (bestdiv % 6 == 0) {
+ *pdiv = 3;
+ *qdiv = bestdiv / 6;
+ *kdiv = 2;
+ } else if (bestdiv % 5 == 0) {
+ *pdiv = 5;
+ *qdiv = bestdiv / 10;
+ *kdiv = 2;
+ } else if (bestdiv % 14 == 0) {
+ *pdiv = 7;
+ *qdiv = bestdiv / 14;
+ *kdiv = 2;
+ }
+ } else {
+ if (bestdiv == 3 || bestdiv == 5 || bestdiv == 7) {
+ *pdiv = bestdiv;
+ *qdiv = 1;
+ *kdiv = 1;
+ } else { /* 9, 15, 21 */
+ *pdiv = bestdiv / 3;
+ *qdiv = 1;
+ *kdiv = 3;
+ }
+ }
+}
+
+static void cnl_wrpll_params_populate(struct skl_wrpll_params *params, uint32_t dco_freq,
+ uint32_t ref_freq, uint32_t pdiv, uint32_t qdiv,
+ uint32_t kdiv)
+{
+ switch (kdiv) {
+ case 1:
+ params->kdiv = 1;
+ break;
+ case 2:
+ params->kdiv = 2;
+ break;
+ case 3:
+ params->kdiv = 4;
+ break;
+ default:
+ WARN(1, "Incorrect KDiv\n");
+ }
+
+ switch (pdiv) {
+ case 2:
+ params->pdiv = 1;
+ break;
+ case 3:
+ params->pdiv = 2;
+ break;
+ case 5:
+ params->pdiv = 4;
+ break;
+ case 7:
+ params->pdiv = 8;
+ break;
+ default:
+ WARN(1, "Incorrect PDiv\n");
+ }
+
+ if (kdiv != 2)
+ qdiv = 1;
+
+ params->qdiv_ratio = qdiv;
+ params->qdiv_mode = (qdiv == 1) ? 0 : 1;
+
+ params->dco_integer = div_u64(dco_freq, ref_freq);
+ params->dco_fraction = div_u64((div_u64((uint64_t)dco_freq<<15, (uint64_t)ref_freq) -
+ ((uint64_t)params->dco_integer<<15)) * 0x8000, 0x8000);
+}
+
+static bool
+cnl_ddi_calculate_wrpll(int clock /* in Hz */,
+ struct drm_i915_private *dev_priv,
+ struct skl_wrpll_params *wrpll_params)
+{
+ uint64_t afe_clock = clock * 5 / KHz(1); /* clocks in kHz */
+ unsigned int dco_min = 7998 * KHz(1);
+ unsigned int dco_max = 10000 * KHz(1);
+ unsigned int dco_mid = (dco_min + dco_max) / 2;
+
+ static const int dividers[] = { 2, 4, 6, 8, 10, 12, 14, 16,
+ 18, 20, 24, 28, 30, 32, 36, 40,
+ 42, 44, 48, 50, 52, 54, 56, 60,
+ 64, 66, 68, 70, 72, 76, 78, 80,
+ 84, 88, 90, 92, 96, 98, 100, 102,
+ 3, 5, 7, 9, 15, 21 };
+ unsigned int d, dco;
+ unsigned int dco_centrality = 0;
+ unsigned int best_dco_centrality = 999999;
+ unsigned int best_div = 0;
+ unsigned int best_dco = 0;
+ unsigned int pdiv = 0, qdiv = 0, kdiv = 0;
+
+ for (d = 0; d < ARRAY_SIZE(dividers); d++) {
+ dco = afe_clock * dividers[d];
+
+ if ((dco <= dco_max) && (dco >= dco_min)) {
+ dco_centrality = abs(dco - dco_mid);
+
+ if (dco_centrality < best_dco_centrality) {
+ best_dco_centrality = dco_centrality;
+ best_div = dividers[d];
+ best_dco = dco;
+ }
+ }
+ }
+
+ if (best_div == 0)
+ return false;
+
+ cnl_wrpll_get_multipliers(best_div, &pdiv, &qdiv, &kdiv);
+
+ cnl_wrpll_params_populate(wrpll_params, best_dco,
+ dev_priv->cdclk.hw.ref, pdiv, qdiv, kdiv);
+
+ return true;
+}
+
static bool cnl_ddi_hdmi_pll_dividers(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
int clock)
{
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
uint32_t cfgcr0, cfgcr1;
struct skl_wrpll_params wrpll_params = { 0, };
cfgcr0 = DPLL_CFGCR0_HDMI_MODE;
- /* FIXME: Proper wrpll calculation done in a following patch */
- return false;
+ if (!cnl_ddi_calculate_wrpll(clock * 1000, dev_priv, &wrpll_params))
+ return false;
cfgcr0 |= DPLL_CFGCR0_DCO_FRACTION(wrpll_params.dco_fraction) |
wrpll_params.dco_integer;
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
