On Tue, May 23, 2017 at 06:32:00PM +0800, Xiaoguang Chen wrote:
> dmabuf for GVT-g can be exported to users who can use the dmabuf to show
> the desktop of vm which use intel vgpu.
>
> Currently we provide query and create new dmabuf operations.
>
> Users of dmabuf can cache some created dmabufs and related information
> such as the framebuffer's address, size, tiling mode, width, height etc.
> When refresh the screen first query the currnet vgpu's frambuffer and
> compare with the cached ones(address, size, tiling, width, height etc)
> if found one then reuse the found dmabuf to gain performance improvment.
>
> If there is no dmabuf created yet or not found in the cached dmabufs then
> need to create a new dmabuf. To create a dmabuf first a gem object will
> be created and the backing storage of this gem object is the vgpu's
> framebuffer(primary/cursor).
> Set caching mode, change tiling mode and set domains of this gem object
> is not supported.
> Then associate this gem object to a dmabuf and export this dmabuf.
> A file descriptor will be generated for this dmabuf and this file
> descriptor can be sent to user space to do display.
>
> Signed-off-by: Xiaoguang Chen <xiaoguang.chen@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/gvt/Makefile | 2 +-
> drivers/gpu/drm/i915/gvt/dmabuf.c | 276 +++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/gvt/dmabuf.h | 53 +++++++
> drivers/gpu/drm/i915/gvt/gvt.h | 1 +
> drivers/gpu/drm/i915/i915_gem.c | 8 +
> drivers/gpu/drm/i915/i915_gem_object.h | 9 ++
> 6 files changed, 348 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/i915/gvt/dmabuf.c
> create mode 100644 drivers/gpu/drm/i915/gvt/dmabuf.h
>
> diff --git a/drivers/gpu/drm/i915/gvt/Makefile b/drivers/gpu/drm/i915/gvt/Makefile
> index 192ca26..e480f7d 100644
> --- a/drivers/gpu/drm/i915/gvt/Makefile
> +++ b/drivers/gpu/drm/i915/gvt/Makefile
> @@ -2,7 +2,7 @@ GVT_DIR := gvt
> GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \
> interrupt.o gtt.o cfg_space.o opregion.o mmio.o display.o edid.o \
> execlist.o scheduler.o sched_policy.o render.o cmd_parser.o \
> - fb_decoder.o
> + fb_decoder.o dmabuf.o
>
> ccflags-y += -I$(src) -I$(src)/$(GVT_DIR) -Wall
> i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))
> diff --git a/drivers/gpu/drm/i915/gvt/dmabuf.c b/drivers/gpu/drm/i915/gvt/dmabuf.c
> new file mode 100644
> index 0000000..415453b
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/gvt/dmabuf.c
> @@ -0,0 +1,276 @@
> +/*
> + * Copyright 2017 Intel Corporation. All rights reserved.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + *
> + * Authors:
> + * Zhiyuan Lv <zhiyuan.lv@xxxxxxxxx>
> + *
> + * Contributors:
> + * Xiaoguang Chen <xiaoguang.chen@xxxxxxxxx>
> + */
> +
> +#include <linux/dma-buf.h>
> +#include <drm/drmP.h>
> +
> +#include "i915_drv.h"
> +#include "gvt.h"
> +
> +#define GEN8_DECODE_PTE(pte) \
> + ((dma_addr_t)(((((u64)pte) >> 12) & 0x7ffffffULL) << 12))
pte & GENMASK_ULL(63, 12)
> +
> +static struct sg_table *intel_vgpu_gem_get_pages(
> + struct drm_i915_gem_object *obj)
> +{
> + struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
> + struct sg_table *st;
> + struct scatterlist *sg;
> + int i, ret;
> + gen8_pte_t __iomem *gtt_entries;
> + unsigned int fb_gma = 0, fb_size = 0;
> + struct intel_vgpu_plane_info *plane_info;
> +
> + plane_info = (struct intel_vgpu_plane_info *)obj->gvt_plane_info;
> + if (WARN_ON(!plane_info))
> + return ERR_PTR(-EINVAL);
This is an internal bug, don't EINVAL.
> + fb_gma = plane_info->start;
> + fb_size = plane_info->size;
> +
> + st = kmalloc(sizeof(*st), GFP_KERNEL);
> + if (!st) {
> + ret = -ENOMEM;
> + return ERR_PTR(ret);
> + }
> +
> + ret = sg_alloc_table(st, fb_size, GFP_KERNEL);
> + if (ret) {
> + kfree(st);
> + return ERR_PTR(ret);
> + }
> + gtt_entries = (gen8_pte_t __iomem *)dev_priv->ggtt.gsm +
> + (fb_gma >> PAGE_SHIFT);
> + for_each_sg(st->sgl, sg, fb_size, i) {
> + sg->offset = 0;
> + sg->length = PAGE_SIZE;
> + sg_dma_address(sg) =
> + GEN8_DECODE_PTE(readq(>t_entries[i]));
> + sg_dma_len(sg) = PAGE_SIZE;
This assumes that the entries are PAGE_SIZE. This will not remain true.
Also sg coalescing?
> + }
> +
> + return st;
> +}
> +
> +static void intel_vgpu_gem_put_pages(struct drm_i915_gem_object *obj,
> + struct sg_table *pages)
> +{
> + struct intel_vgpu_plane_info *plane_info;
> +
> + plane_info = (struct intel_vgpu_plane_info *)obj->gvt_plane_info;
> + if (WARN_ON(!plane_info))
> + return;
Is there any value in this check?
> + sg_free_table(pages);
> + kfree(pages);
> +}
> +
> +static const struct drm_i915_gem_object_ops intel_vgpu_gem_ops = {
> + .flags = I915_GEM_OBJECT_IS_GVT_DMABUF,
I'm going to suggest to call this bit I915_GEM_OBJECT_IS_PROXY to
generalise it beyond this special case. But I'm still debating how much
I approve of this change to the uABI.
> + .get_pages = intel_vgpu_gem_get_pages,
> + .put_pages = intel_vgpu_gem_put_pages,
> +};
> +
> +static struct drm_i915_gem_object *intel_vgpu_create_gem(struct drm_device *dev,
> + struct intel_vgpu_plane_info *info)
> +{
> + struct drm_i915_private *pri = dev->dev_private;
to_i915(dev);
Please tell me that pri isn't common shorthand in gvt/! Commonly called
dev_priv, but I'm crusading for i915.
> + struct drm_i915_gem_object *obj;
> +
> + obj = i915_gem_object_alloc(pri);
> + if (obj == NULL)
> + return NULL;
> +
> + drm_gem_private_object_init(dev, &obj->base,
> + info->size << PAGE_SHIFT);
> + i915_gem_object_init(obj, &intel_vgpu_gem_ops);
> +
> + obj->base.read_domains = I915_GEM_DOMAIN_GTT;
> + obj->base.write_domain = 0;
> + obj->framebuffer_references++;
Missing comment. (And not amused with the magic, if it's only purpose is
to prevent set_tiling.)
> + obj->gvt_plane_info = info;
> +
> + if (IS_SKYLAKE(pri)) {
> + unsigned int tiling_mode = 0;
> +
> + switch (info->drm_format_mod << 10) {
> + case PLANE_CTL_TILED_LINEAR:
> + tiling_mode = I915_TILING_NONE;
> + break;
> + case PLANE_CTL_TILED_X:
> + tiling_mode = I915_TILING_X;
> + break;
> + case PLANE_CTL_TILED_Y:
> + tiling_mode = I915_TILING_Y;
> + break;
> + default:
> + gvt_dbg_core("not supported tiling mode\n");
> + }
> + obj->tiling_and_stride = tiling_mode | info->stride;
Stride should be zero if I915_TILING_NONE;
> + } else {
> + obj->tiling_and_stride = info->drm_format_mod ?
> + I915_TILING_X : 0;
> + }
> +
> + return obj;
> +}
> +
> +static struct intel_vgpu_plane_info *intel_vgpu_get_plane_info(
> + struct drm_device *dev,
> + struct intel_vgpu *vgpu, uint32_t plane_id)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv here! Still use to_i915() though.
> + struct intel_vgpu_primary_plane_format *p;
> + struct intel_vgpu_cursor_plane_format *c;
> + struct intel_vgpu_plane_info *info;
> + struct intel_vgpu_pipe_format *pipe;
> +
> + info = kmalloc(sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return NULL;
> +
> + pipe = intel_vgpu_decode_plane(dev, vgpu);
> + if (pipe == NULL)
> + return NULL;
Onion unwind to kill the leaks as others have mentioned.
> +int intel_vgpu_query_plane(struct intel_vgpu *vgpu, void *args)
> +{
> + struct drm_device *dev = &vgpu->gvt->dev_priv->drm;
> + struct intel_vgpu_plane_info *info = args;
> +
> + info = intel_vgpu_get_plane_info(dev, vgpu, info->plane_id);
> + if (info == NULL)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +int intel_vgpu_create_dmabuf(struct intel_vgpu *vgpu, void *args)
> +{
> + struct dma_buf *dmabuf;
> + struct drm_i915_gem_object *obj;
> + struct drm_device *dev = &vgpu->gvt->dev_priv->drm;
> + struct intel_vgpu_dmabuf *gvt_dmabuf = args;
> + struct intel_vgpu_plane_info *info;
> + int ret;
> +
> + info = intel_vgpu_get_plane_info(dev, vgpu,
> + gvt_dmabuf->plane_info.plane_id);
> + if (info == NULL)
> + return -EINVAL;
> +
> + obj = intel_vgpu_create_gem(dev, info);
> + if (obj == NULL) {
> + gvt_vgpu_err("create gvt gem obj failed:%d\n", vgpu->id);
> + return -EINVAL;
Of all the errors that can cause this, do you think the user is at fault?
> + }
> +
> + dmabuf = i915_gem_prime_export(dev, &obj->base, DRM_CLOEXEC | DRM_RDWR);
> +
> + if (IS_ERR(dmabuf)) {
> + gvt_vgpu_err("export dma-buf failed\n");
> + return -EINVAL;
Again, was this a user error? You even have the right error to hand!
> + }
> +
> + ret = dma_buf_fd(dmabuf, DRM_CLOEXEC | DRM_RDWR);
> + if (ret < 0) {
> + gvt_vgpu_err("create dma-buf fd failed ret:%d\n", ret);
> + return -EINVAL;
Sitll a user error? Not ret?
> + }
> + gvt_dmabuf->fd = ret;
> + gvt_dmabuf->plane_info = *info;
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h
> index c42266c..763a8c5 100644
> --- a/drivers/gpu/drm/i915/gvt/gvt.h
> +++ b/drivers/gpu/drm/i915/gvt/gvt.h
> @@ -47,6 +47,7 @@
> #include "render.h"
> #include "cmd_parser.h"
> #include "fb_decoder.h"
> +#include "dmabuf.h"
>
> #define GVT_MAX_VGPU 8
>
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 0c1cbe9..54f7a0f 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -1609,6 +1609,10 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
> if (!obj)
> return -ENOENT;
>
> + /* The obj is a gvt dma-buf object and set domain is not supported */
> + if (i915_gem_object_is_gvt_dmabuf(obj))
> + return -EPERM;
Leaks the obj.
Ok, I'm slightly warming to this.
Newly broken ioctls:
i915_gem_set_caching_ioctl
i915_gem_set_domain_ioctl
i915_gem_sw_finish_ioctl
i915_gem_set_tiling_ioctl
i915_gem_madvise_ioctl
These should all be -EPERM.
Existing broken ioctls:
i915_gem_mmap_ioctl
Sadly this used -EINVAL. Might sneak a change in to use -EPERM for
constistency.
Misbehaving ioctls:
i915_gem_busy_ioctl
i915_gem_throttle_ioctl
i915_gem_wait_ioctl
These only work on the proxy bo and do not reflect the real object.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
