On Thu, May 04, 2017 at 12:25:26PM +0200, Takashi Iwai wrote:
> On Thu, 04 May 2017 12:18:29 +0200,
> Chris Wilson wrote:
> >
> > hdac_wait_for_cmd_dmas() uses a jiffie timeout to ensure that we do not
> > wait forever for stuck hardware. However, it is called from an
> > irq-disabled context which prevents jiffie from advancing and so the
> > loop doesn't terminate if the hardware fails. This can then cause NMI
> > watchdog warnings, such as:
> >
> > NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
> > Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core snd_pcm ptp mei_me prime_numbers pps_core mei lpc_ich i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
> > irq event stamp: 13366
> > hardirqs last enabled at (13365): [<ffffffff81891a87>] _raw_spin_unlock_irq+0x27/0x50
> > hardirqs last disabled at (13366): [<ffffffff818918d2>] _raw_spin_lock_irq+0x12/0x50
> > softirqs last enabled at (12744): [<ffffffff81085c79>] __do_softirq+0x1d9/0x4c0
> > softirqs last disabled at (12721): [<ffffffff810860d9>] irq_exit+0xa9/0xc0
> > CPU: 3 PID: 10443 Comm: kworker/u8:11 Tainted: G U 4.11.0-rc4-CI-CI_DRM_319+ #1
> > Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
> > Workqueue: events_unbound async_run_entry_fn
> > task: ffff88024cd32740 task.stack: ffffc9000162c000
> > RIP: 0010:preempt_count_add+0xe/0xc0
> > RSP: 0018:ffffc9000162fbd8 EFLAGS: 00000082
> > RAX: 0000000080000001 RBX: 0000000704b96558 RCX: 0000000000000002
> > RDX: 0000000000000000 RSI: ffffffff81c74f2d RDI: 0000000000000001
> > RBP: ffffc9000162fc08 R08: 00000000bbcc90cc R09: 23c7b07100000000
> > R10: ffffffff827901a8 R11: ffff88024cd32740 R12: 0000000704b92baa
> > R13: 0000000000003ea0 R14: 0000000000000003 R15: ffffffffa00061f0
> > FS: 0000000000000000(0000) GS:ffff880256d80000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: 00007f90f84a5144 CR3: 0000000003e0f000 CR4: 00000000003406e0
> > Call Trace:
> > ? delay_tsc+0x3d/0xc0
> > __delay+0xa/0x10
> > __const_udelay+0x31/0x40
> > snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core]
> > ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel]
> > snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core]
> > azx_stop_chip+0x9/0x10 [snd_hda_codec]
> > azx_suspend+0x72/0x220 [snd_hda_intel]
> > pci_pm_suspend+0x71/0x140
> > dpm_run_callback+0x6f/0x330
> > ? pci_pm_freeze+0xe0/0xe0
> > __device_suspend+0xf9/0x370
> > ? dpm_watchdog_set+0x60/0x60
> > async_suspend+0x1a/0x90
> > async_run_entry_fn+0x34/0x160
> > process_one_work+0x1f4/0x6d0
> > ? process_one_work+0x16e/0x6d0
> > worker_thread+0x49/0x4a0
> > kthread+0x107/0x140
> > ? process_one_work+0x6d0/0x6d0
> > ? kthread_create_on_node+0x40/0x40
> > ret_from_fork+0x2e/0x40
> >
> > Fixes: 38b19ed7f81e ("ALSA: hda: fix to wait for RIRB & CORB DMA to set")
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419
> > Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > Cc: Jeeja KP <jeeja.kp@xxxxxxxxx>
> > Cc: Vinod Koul <vinod.koul@xxxxxxxxx>
> > Cc: Takashi Iwai <tiwai@xxxxxxx>
> > Cc: <stable@xxxxxxxxxxxxxxx> # v4.7+
>
> Any reason to submit a different fix from what's attached in the
> bugzilla you mentioned?
Because I didn't see it when Marta complained on irc and suggested
reverting 38b19ed7f81e. There's no advantage either way, but even after
fixing the timeout detection we are still left with the issue that the
hw is stuck and suffer a 200ms suspend delay. :|
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
