Re: [PATCH 03/11] drm/i915: Stop pretending to mask/unmask LPE audio interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/25/17 3:27 PM, ville.syrjala@xxxxxxxxxxxxxxx wrote:
From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

vlv_display_irq_postinstall() enables the LPE audio interrupts
regardless of whether the LPE audio irq chip has masked/unmasked
them. Also the irqchip masking/unmasking doesn't consider the state
of the display power well or the device, and hence just leads to
dmesg spew when it tries to access the hardware while it's powered
down.

If the current way works, then we don't need to do anything in the
mask/unmask hooks. If it doesn't work, well, then we'd need to properly
track whether the irqchip has masked/unmasked the interrupts when
we enable display interrupts. And the mask/unmask hooks would need
to check whether display interrupts are even enabled before frobbing
with he registers.

So let's just assume the current way works and neuter the mask/unmask
hooks. Also clean up vlv_display_irq_postinstall() a bit and stop
it from trying to unmask/enable the LPE C interrupt on VLV since it
doesn't exist.

No objections, I assumed that we did want to update VLV_IMR and VLV_IIR in the mask/unmask, that was the initial recommendation IIRC

There was also a comment where we removed all tests in vlv_display_irq_postinstall:

>> +		if (IS_LPE_AUDIO_ENABLED(dev_priv))
>> +			if (IS_LPE_AUDIO_IRQ_VALID(dev_priv))
>
>I think both of these checks can be removed. We won't unmask the
>interrupts unless lpe is enabled, so the IIR bits will never be set in
>that case.





Cc: Takashi Iwai <tiwai@xxxxxxx>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_irq.c        | 15 ++++++--------
 drivers/gpu/drm/i915/intel_lpe_audio.c | 36 ----------------------------------
 2 files changed, 6 insertions(+), 45 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index fd97fe00cd0d..190f6aa5d15e 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2953,7 +2953,6 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)
 	u32 pipestat_mask;
 	u32 enable_mask;
 	enum pipe pipe;
-	u32 val;

 	pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV |
 			PIPE_CRC_DONE_INTERRUPT_STATUS;
@@ -2964,18 +2963,16 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)

 	enable_mask = I915_DISPLAY_PORT_INTERRUPT |
 		I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
-		I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
+		I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
+		I915_LPE_PIPE_A_INTERRUPT |
+		I915_LPE_PIPE_B_INTERRUPT;
+
 	if (IS_CHERRYVIEW(dev_priv))
-		enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT;
+		enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT |
+			I915_LPE_PIPE_C_INTERRUPT;

 	WARN_ON(dev_priv->irq_mask != ~0);

-	val = (I915_LPE_PIPE_A_INTERRUPT |
-		I915_LPE_PIPE_B_INTERRUPT |
-		I915_LPE_PIPE_C_INTERRUPT);
-
-	enable_mask |= val;
-
 	dev_priv->irq_mask = ~enable_mask;

 	GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask);
diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
index 668f00480d97..292fedf30b00 100644
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -149,44 +149,10 @@ static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv)

 static void lpe_audio_irq_unmask(struct irq_data *d)
 {
-	struct drm_i915_private *dev_priv = d->chip_data;
-	unsigned long irqflags;
-	u32 val = (I915_LPE_PIPE_A_INTERRUPT |
-		I915_LPE_PIPE_B_INTERRUPT);
-
-	if (IS_CHERRYVIEW(dev_priv))
-		val |= I915_LPE_PIPE_C_INTERRUPT;
-
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-
-	dev_priv->irq_mask &= ~val;
-	I915_WRITE(VLV_IIR, val);
-	I915_WRITE(VLV_IIR, val);
-	I915_WRITE(VLV_IMR, dev_priv->irq_mask);
-	POSTING_READ(VLV_IMR);
-
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 }

 static void lpe_audio_irq_mask(struct irq_data *d)
 {
-	struct drm_i915_private *dev_priv = d->chip_data;
-	unsigned long irqflags;
-	u32 val = (I915_LPE_PIPE_A_INTERRUPT |
-		I915_LPE_PIPE_B_INTERRUPT);
-
-	if (IS_CHERRYVIEW(dev_priv))
-		val |= I915_LPE_PIPE_C_INTERRUPT;
-
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-
-	dev_priv->irq_mask |= val;
-	I915_WRITE(VLV_IMR, dev_priv->irq_mask);
-	I915_WRITE(VLV_IIR, val);
-	I915_WRITE(VLV_IIR, val);
-	POSTING_READ(VLV_IIR);
-
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 }

 static struct irq_chip lpe_audio_irqchip = {
@@ -330,8 +296,6 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)

 	desc = irq_to_desc(dev_priv->lpe_audio.irq);

-	lpe_audio_irq_mask(&desc->irq_data);
-
 	lpe_audio_platdev_destroy(dev_priv);

 	irq_free_desc(dev_priv->lpe_audio.irq);


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux