[PATCH v5 04/11] drm/i915: Add plumbing for digital connector state, v3.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some atomic properties are common between the various kinds of
connectors, for example a lot of them use panel fitting mode.
It makes sense to put a lot of it in a common place, so each
connector can use it while they're being converted.

Implement the properties required for the connectors:
- scaling mode property
- force audio property
- broadcast rgb
- aspect ratio

While at it, make clear that intel_digital_connector_atomic_get_property
is a hack that has to be removed when all connector properties
are converted to atomic.

Changes since v1:
- Scaling mode and aspect ratio are partly handled in core now.
Changes since v2:
- Split out the scaling mode / aspect ratio changes to a preparation
  patch.
- Use mode_changed for panel fitter, changes to this property
  are checked by fastset.
- Allowed_scaling_modes is removed, handled through core now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_atomic.c  | 131 +++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_display.c |  14 +++-
 drivers/gpu/drm/i915/intel_drv.h     |  23 ++++++
 3 files changed, 159 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 50fb1f76cc5f..182909f266f5 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -36,7 +36,7 @@
 #include "intel_drv.h"
 
 /**
- * intel_connector_atomic_get_property - fetch connector property value
+ * intel_connector_atomic_get_property - fetch legacy connector property value
  * @connector: connector to fetch property for
  * @state: state containing the property value
  * @property: property to look up
@@ -45,12 +45,14 @@
  * The DRM core does not store shadow copies of properties for
  * atomic-capable drivers.  This entrypoint is used to fetch
  * the current value of a driver-specific connector property.
+ *
+ * This is a intermediary solution until all connectors are
+ * converted to support full atomic properties.
  */
-int
-intel_connector_atomic_get_property(struct drm_connector *connector,
-				    const struct drm_connector_state *state,
-				    struct drm_property *property,
-				    uint64_t *val)
+int intel_connector_atomic_get_property(struct drm_connector *connector,
+					const struct drm_connector_state *state,
+					struct drm_property *property,
+					uint64_t *val)
 {
 	int i;
 
@@ -73,7 +75,122 @@ intel_connector_atomic_get_property(struct drm_connector *connector,
 	return -EINVAL;
 }
 
-/*
+/**
+ * intel_digital_connector_atomic_get_property - hook for connector->atomic_get_property.
+ * @connector: Connector to get the property for.
+ * @state: Connector state to retrieve the property from.
+ * @property: Property to retrieve.
+ * @val: Return value for the property.
+ *
+ * Returns the atomic property value for a digital connector.
+ */
+int intel_digital_connector_atomic_get_property(struct drm_connector *connector,
+						const struct drm_connector_state *state,
+						struct drm_property *property,
+						uint64_t *val)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_digital_connector_state *intel_conn_state =
+		to_intel_digital_connector_state(state);
+
+	if (property == dev_priv->force_audio_property)
+		*val = intel_conn_state->force_audio;
+	else if (property == dev_priv->broadcast_rgb_property)
+		*val = intel_conn_state->broadcast_rgb;
+	else {
+		DRM_DEBUG_ATOMIC("Unknown property %s\n", property->name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * intel_digital_connector_atomic_set_property - hook for connector->atomic_set_property.
+ * @connector: Connector to set the property for.
+ * @state: Connector state to set the property on.
+ * @property: Property to set.
+ * @val: New value for the property.
+ *
+ * Sets the atomic property value for a digital connector.
+ */
+int intel_digital_connector_atomic_set_property(struct drm_connector *connector,
+						struct drm_connector_state *state,
+						struct drm_property *property,
+						uint64_t val)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_digital_connector_state *intel_conn_state =
+		to_intel_digital_connector_state(state);
+
+	if (property == dev_priv->force_audio_property) {
+		intel_conn_state->force_audio = val;
+		return 0;
+	}
+
+	if (property == dev_priv->broadcast_rgb_property) {
+		intel_conn_state->broadcast_rgb = val;
+		return 0;
+	}
+
+	DRM_DEBUG_ATOMIC("Unknown property %s\n", property->name);
+	return -EINVAL;
+}
+
+int intel_digital_connector_atomic_check(struct drm_connector *conn,
+					 struct drm_connector_state *new_state)
+{
+	struct intel_digital_connector_state *new_conn_state =
+		to_intel_digital_connector_state(new_state);
+	struct drm_connector_state *old_state =
+		drm_atomic_get_old_connector_state(new_state->state, conn);
+	struct intel_digital_connector_state *old_conn_state =
+		to_intel_digital_connector_state(old_state);
+	struct drm_crtc_state *crtc_state;
+
+	if (!new_state->crtc)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(new_state->state, new_state->crtc);
+
+	/*
+	 * These properties are handled by fastset, and might not end
+	 * up in a modeset.
+	 */
+	if (new_conn_state->force_audio != old_conn_state->force_audio ||
+	    new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
+	    new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
+	    new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
+		crtc_state->mode_changed = true;
+
+	return 0;
+}
+
+/**
+ * intel_digital_connector_duplicate_state - duplicate connector state
+ * @connector: digital connector
+ *
+ * Allocates and returns a copy of the connector state (both common and
+ * digital connector specific) for the specified connector.
+ *
+ * Returns: The newly allocated connector state, or NULL on failure.
+ */
+struct drm_connector_state *
+intel_digital_connector_duplicate_state(struct drm_connector *connector)
+{
+	struct intel_digital_connector_state *state;
+
+	state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	__drm_atomic_helper_connector_duplicate_state(connector, &state->base);
+	return &state->base;
+}
+
+/**
  * intel_crtc_duplicate_state - duplicate crtc state
  * @crtc: drm crtc
  *
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 85b9e2f521a0..108122daa807 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5956,11 +5956,21 @@ static void intel_connector_verify_state(struct intel_connector *connector)
 
 int intel_connector_init(struct intel_connector *connector)
 {
-	drm_atomic_helper_connector_reset(&connector->base);
+	struct intel_digital_connector_state *conn_state;
 
-	if (!connector->base.state)
+	/*
+	 * Allocate enough memory to hold intel_digital_connector_state,
+	 * This might be a few bytes too many, but for connectors that don't
+	 * need it we'll free the state and allocate a smaller one on the first
+	 * succesful commit anyway.
+	 */
+	conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL);
+	if (!conn_state)
 		return -ENOMEM;
 
+	__drm_atomic_helper_connector_reset(&connector->base,
+					    &conn_state->base);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f44dd29f4f79..14bf8f6399f3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -331,6 +331,15 @@ struct intel_connector {
 	struct work_struct modeset_retry_work;
 };
 
+struct intel_digital_connector_state {
+	struct drm_connector_state base;
+
+	enum hdmi_force_audio force_audio;
+	int broadcast_rgb;
+};
+
+#define to_intel_digital_connector_state(x) container_of(x, struct intel_digital_connector_state, base)
+
 struct dpll {
 	/* given values */
 	int n;
@@ -1888,6 +1897,20 @@ int intel_connector_atomic_get_property(struct drm_connector *connector,
 					const struct drm_connector_state *state,
 					struct drm_property *property,
 					uint64_t *val);
+
+int intel_digital_connector_atomic_get_property(struct drm_connector *connector,
+						const struct drm_connector_state *state,
+						struct drm_property *property,
+						uint64_t *val);
+int intel_digital_connector_atomic_set_property(struct drm_connector *connector,
+						struct drm_connector_state *state,
+						struct drm_property *property,
+						uint64_t val);
+int intel_digital_connector_atomic_check(struct drm_connector *conn,
+					 struct drm_connector_state *new_state);
+struct drm_connector_state *
+intel_digital_connector_duplicate_state(struct drm_connector *connector);
+
 struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
 void intel_crtc_destroy_state(struct drm_crtc *crtc,
 			       struct drm_crtc_state *state);
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux