Re: [PATCH v3 06/10] drm/fb-helper: Support deferred setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 21, 2017 at 09:13:54AM +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@xxxxxxxxxx>
> 
> FB helper code falls back to a 1024x768 mode if no outputs are connected
> or don't report back any modes upon initialization. This can be annoying
> because outputs that are added to FB helper later on can't be used with
> FB helper if they don't support a matching mode.
> 
> The fallback is in place because VGA connectors can happen to report an
> unknown connection status even when they are in fact connected.
> 
> Some drivers have custom solutions in place to defer FB helper setup
> until at least one output is connected. But the logic behind these
> solutions is always the same and there is nothing driver-specific about
> it, so a better alterative is to fix the FB helper core and add support
> for all drivers automatically.
> 
> This patch adds support for deferred FB helper setup. It checks all the
> connectors for their connection status, and if all of them report to be
> disconnected marks the FB helper as needing deferred setup. Whet setup
> is deferred, the FB helper core will automatically retry setup after a
> hotplug event, and it will keep trying until it succeeds.
> 
> Tested-by: John Stultz <john.stultz@xxxxxxxxxx>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>

Ok 2nd attempt at making this work, probably easier to go back to v2.
> ---
>  drivers/gpu/drm/drm_fb_helper.c | 60 +++++++++++++++++++++++++++++++++++++----
>  include/drm/drm_fb_helper.h     | 21 +++++++++++++++
>  2 files changed, 76 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 9060adcf7cf8..d4a2c97d8b02 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -511,6 +511,9 @@ int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
>  	if (!drm_fbdev_emulation)
>  		return -ENODEV;
>  
> +	if (fb_helper->deferred_setup)
> +		return 0;

Please wrap in READ_ONCE to make it clear we're doing lockless checking
here.

> +
>  	mutex_lock(&fb_helper->lock);
>  	drm_modeset_lock_all(dev);
>  
> @@ -1597,6 +1600,23 @@ int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
>  }
>  EXPORT_SYMBOL(drm_fb_helper_pan_display);
>  
> +static bool drm_fb_helper_maybe_connected(struct drm_fb_helper *helper)
> +{
> +	bool connected = false;
> +	unsigned int i;
> +
> +	for (i = 0; i < helper->connector_count; i++) {
> +		struct drm_fb_helper_connector *fb = helper->connector_info[i];
> +
> +		if (fb->connector->status != connector_status_disconnected) {
> +			connected = true;
> +			break;
> +		}
> +	}
> +
> +	return connected;
> +}
> +
>  /*
>   * Allocates the backing storage and sets up the fbdev info structure through
>   * the ->fb_probe callback and then registers the fbdev and sets up the panic
> @@ -2254,8 +2274,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  	int i;
>  
>  	DRM_DEBUG_KMS("\n");
> -	if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
> -		DRM_DEBUG_KMS("No connectors reported connected with modes\n");
>  
>  	/* prevent concurrent modification of connector_count by hotplug */
>  	lockdep_assert_held(&fb_helper->dev->mode_config.mutex);
> @@ -2378,6 +2396,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
>  {
>  	struct drm_device *dev = fb_helper->dev;
> +	unsigned int width, height;
>  	struct fb_info *info;
>  	int ret;
>  
> @@ -2385,14 +2404,34 @@ int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
>  		return 0;
>  

>From here ...
>  	mutex_lock(&dev->mode_config.mutex);
> -	drm_setup_crtcs(fb_helper,
> -			dev->mode_config.max_width,
> -			dev->mode_config.max_height);
> +
> +	width = dev->mode_config.max_width;
> +	height = dev->mode_config.max_height;
> +
> +	if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
> +		DRM_DEBUG_KMS("No connectors reported connected with modes\n");
> +
> +	/*
> +	 * If everything's disconnected, there's no use in attempting to set
> +	 * up fbdev.
> +	 */
> +	if (!drm_fb_helper_maybe_connected(fb_helper)) {
> +		DRM_INFO("No outputs connected, deferring setup\n");
> +		fb_helper->preferred_bpp = bpp_sel;
> +		fb_helper->deferred_setup = true;
> +		mutex_unlock(&dev->mode_config.mutex);
> +		return 0;
> +	}
> +
> +	drm_setup_crtcs(fb_helper, width, height);
> +
>  	ret = drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
>  	mutex_unlock(&dev->mode_config.mutex);
>  	if (ret)
>  		return ret;
>  
> +	fb_helper->deferred_setup = false;

To here you need to hold the new fb_helper->mutex. Plus at the top, after
you've grabbed the lock, you need to re-check ->deferred_setup. This way
we guaranteed that only 1 thread can ever do the deferred setup, while not
holding the lock while we call register_framebuffer. If you hold any fbdev
or kms lock while calling register_framebuffer you will deadlock.

> +
>  	info = fb_helper->fbdev;
>  	info->var.pixclock = 0;
>  	ret = register_framebuffer(info);
> @@ -2437,11 +2476,16 @@ EXPORT_SYMBOL(drm_fb_helper_initial_config);
>  int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
>  {
>  	struct drm_device *dev = fb_helper->dev;
> +	unsigned int width, height;
>  	int err = 0;
>  
>  	if (!drm_fbdev_emulation)
>  		return 0;
>  
> +	if (fb_helper->deferred_setup)

Same here, please wrap in READ_ONCE, this is just a fastpath check.

With those changes your prep patch to roll out fb_helper->mutex more
shouldn't be needed at all.

Cheers, Daniel

> +		return drm_fb_helper_initial_config(fb_helper,
> +						    fb_helper->preferred_bpp);
> +
>  	mutex_lock(&fb_helper->lock);
>  	mutex_lock(&dev->mode_config.mutex);
>  
> @@ -2453,6 +2497,12 @@ int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
>  
>  	DRM_DEBUG_KMS("\n");
>  
> +	width = dev->mode_config.max_width;
> +	height = dev->mode_config.max_height;
> +
> +	if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
> +		DRM_DEBUG_KMS("No connectors reported connected with modes\n");
> +
>  	drm_setup_crtcs(fb_helper, fb_helper->fb->width, fb_helper->fb->height);
>  
>  	mutex_unlock(&dev->mode_config.mutex);
> diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
> index 33771d0c44e3..41c3587751f8 100644
> --- a/include/drm/drm_fb_helper.h
> +++ b/include/drm/drm_fb_helper.h
> @@ -222,6 +222,27 @@ struct drm_fb_helper {
>  	 * needs to be reprobe when fbdev is in control again.
>  	 */
>  	bool delayed_hotplug;
> +
> +	/**
> +	 * @deferred_setup:
> +	 *
> +	 * If no outputs are connected (disconnected or unknown) the FB helper
> +	 * code will defer setup until at least one of the outputs shows up.
> +	 * This field keeps track of the status so that setup can be retried
> +	 * at every hotplug event until it succeeds eventually.
> +	 */
> +	bool deferred_setup;
> +
> +	/**
> +	 * @preferred_bpp:
> +	 *
> +	 * Temporary storage for the driver's preferred BPP setting passed to
> +	 * FB helper initialization. This needs to be tracked so that deferred
> +	 * FB helper setup can pass this on.
> +	 *
> +	 * See also: @deferred_setup
> +	 */
> +	int preferred_bpp;
>  };
>  
>  /**
> -- 
> 2.12.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux