Mostly because I want the links from the newly-added @state functions to work. But I think explaining when they're useful and that the implicit one is deprecated is good either way. Slightly repetitive unfortunately. Cc: Harry Wentland <harry.wentland@xxxxxxx> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx> --- include/drm/drm_atomic.h | 159 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 158 insertions(+), 1 deletion(-) diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 0147a047878d..fd33ed5eaeb4 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -498,6 +498,23 @@ int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state); void drm_state_dump(struct drm_device *dev, struct drm_printer *p); +/** + * for_each_connector_in_state - iterate over all connectors in an atomic update + * @__state: &struct drm_atomic_state pointer + * @connector: &struct drm_connector iteration cursor + * @connector_state: &struct drm_connector_state iteration cursor + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all connectors in an atomic update. Note that before the + * software state is committed (by calling drm_atomic_helper_swap_state(), this + * points to the new state, while afterwards it points to the old state. Due to + * this tricky confusion this macro is deprecated. + * + * FIXME: + * + * Replace all usage of this with one of the explicit iterators below and then + * remove this macro. + */ #define for_each_connector_in_state(__state, connector, connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector && \ @@ -506,6 +523,20 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (connector) +/** + * for_each_oldnew_connector_in_state - iterate over all connectors in an atomic update + * @__state: &struct drm_atomic_state pointer + * @connector: &struct drm_connector iteration cursor + * @old_connector_state: &struct drm_connector_state iteration cursor for the + * old state + * @new_connector_state: &struct drm_connector_state iteration cursor for the + * new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all connectors in an atomic update, tracking both old and + * new state. This is useful in places where the state delta needs to be + * considered, for example in atomic check functions. + */ #define for_each_oldnew_connector_in_state(__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector && \ @@ -515,6 +546,18 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (connector) +/** + * for_each_old_connector_in_state - iterate over all connectors in an atomic update + * @__state: &struct drm_atomic_state pointer + * @connector: &struct drm_connector iteration cursor + * @old_connector_state: &struct drm_connector_state iteration cursor for the + * old state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all connectors in an atomic update, tracking only the old + * state. This is useful in disable functions, where we need the old state the + * hardware is still in. + */ #define for_each_old_connector_in_state(__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector && \ @@ -523,6 +566,18 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (connector) +/** + * for_each_new_connector_in_state - iterate over all connectors in an atomic update + * @__state: &struct drm_atomic_state pointer + * @connector: &struct drm_connector iteration cursor + * @new_connector_state: &struct drm_connector_state iteration cursor for the + * new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all connectors in an atomic update, tracking only the new + * state. This is useful in enable functions, where we need the new state the + * hardware should be in when the atomic commit operation has completed. + */ #define for_each_new_connector_in_state(__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector && \ @@ -531,6 +586,23 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (connector) +/** + * for_each_crtc_in_state - iterate over all connectors in an atomic update + * @__state: &struct drm_atomic_state pointer + * @crtc: &struct drm_crtc iteration cursor + * @crtc_state: &struct drm_crtc_state iteration cursor + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all CRTCs in an atomic update. Note that before the + * software state is committed (by calling drm_atomic_helper_swap_state(), this + * points to the new state, while afterwards it points to the old state. Due to + * this tricky confusion this macro is deprecated. + * + * FIXME: + * + * Replace all usage of this with one of the explicit iterators below and then + * remove this macro. + */ #define for_each_crtc_in_state(__state, crtc, crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc && \ @@ -539,6 +611,18 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (crtc_state) +/** + * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update + * @__state: &struct drm_atomic_state pointer + * @crtc: &struct drm_crtc iteration cursor + * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state + * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all CRTCs in an atomic update, tracking both old and + * new state. This is useful in places where the state delta needs to be + * considered, for example in atomic check functions. + */ #define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc && \ @@ -548,6 +632,17 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (crtc) +/** + * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update + * @__state: &struct drm_atomic_state pointer + * @crtc: &struct drm_crtc iteration cursor + * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all CRTCs in an atomic update, tracking only the old + * state. This is useful in disable functions, where we need the old state the + * hardware is still in. + */ #define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc && \ @@ -556,6 +651,17 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (crtc) +/** + * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update + * @__state: &struct drm_atomic_state pointer + * @crtc: &struct drm_crtc iteration cursor + * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all CRTCs in an atomic update, tracking only the new + * state. This is useful in enable functions, where we need the new state the + * hardware should be in when the atomic commit operation has completed. + */ #define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc && \ @@ -564,6 +670,23 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (crtc) +/** + * for_each_plane_in_state - iterate over all planes in an atomic update + * @__state: &struct drm_atomic_state pointer + * @plane: &struct drm_plane iteration cursor + * @plane_state: &struct drm_plane_state iteration cursor + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all planes in an atomic update. Note that before the + * software state is committed (by calling drm_atomic_helper_swap_state(), this + * points to the new state, while afterwards it points to the old state. Due to + * this tricky confusion this macro is deprecated. + * + * FIXME: + * + * Replace all usage of this with one of the explicit iterators below and then + * remove this macro. + */ #define for_each_plane_in_state(__state, plane, plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane && \ @@ -572,6 +695,18 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (plane_state) +/** + * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update + * @__state: &struct drm_atomic_state pointer + * @plane: &struct drm_plane iteration cursor + * @old_plane_state: &struct drm_plane_state iteration cursor for the old state + * @new_plane_state: &struct drm_plane_state iteration cursor for the new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all planes in an atomic update, tracking both old and + * new state. This is useful in places where the state delta needs to be + * considered, for example in atomic check functions. + */ #define for_each_oldnew_plane_in_state(__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane && \ @@ -581,6 +716,17 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (plane) +/** + * for_each_old_plane_in_state - iterate over all planes in an atomic update + * @__state: &struct drm_atomic_state pointer + * @plane: &struct drm_plane iteration cursor + * @old_plane_state: &struct drm_plane_state iteration cursor for the old state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all planes in an atomic update, tracking only the old + * state. This is useful in disable functions, where we need the old state the + * hardware is still in. + */ #define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane && \ @@ -589,6 +735,17 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if (plane) +/** + * for_each_new_plane_in_state - iterate over all planes in an atomic update + * @__state: &struct drm_atomic_state pointer + * @plane: &struct drm_plane iteration cursor + * @new_plane_state: &struct drm_plane_state iteration cursor for the new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all planes in an atomic update, tracking only the new + * state. This is useful in enable functions, where we need the new state the + * hardware should be in when the atomic commit operation has completed. + */ #define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane && \ @@ -603,7 +760,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); * * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track * whether the state CRTC changed enough to need a full modeset cycle: - * connectors_changed, mode_changed and active_changed. This helper simply + * planes_changed, mode_changed and active_changed. This helper simply * combines these three to compute the overall need for a modeset for @state. * * The atomic helper code sets these booleans, but drivers can and should -- 2.11.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
