On Mon, Mar 13, 2017 at 10:53:23PM +0200, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Apparently some DP sinks are a little nuts and cause HPD to drop
> intermittently during modesets. This happens eg. on an ASUS PB287Q.
> In oder to recover from this we can't really use the previous
> connector status to determine if the link needs retraining, so let's
> just ignore that piece of information and do the retrain
> unconditionally. We do of course still check whether the link is
> supposed to be running or not.
>
> To actually get read out the EDID and update things properly we
> also need to nuke the goto out added by commit 7d23e3c37bb3
> ("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure
> why that was there. Perhaps to avoid an EDID read if the connector
> status didn't appear to change, but that sort of thing is quite racy
> and would have failed anyway if we failed to keep up with the
> hotplugs (if we missed the HPD down in between two HPD ups). And
> now that we take this codepath unconditionally we definitely need
> to drop the goto as otherwise we would never do the EDID read.
>
> v2: Drop the goto that made us skip EDID reads entirely. Doh!
>
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> Cc: Palmer Dabbelt <palmer@xxxxxxxxxxx>
> Reported-by: Palmer Dabbelt <palmer@xxxxxxxxxxx>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766
> References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.html
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index fd96a6cf7326..5c2f1b37b58f 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4634,16 +4634,22 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> */
> status = connector_status_disconnected;
> goto out;
> - } else if (connector->status == connector_status_connected) {
> + } else {
> /*
> - * If display was connected already and is still connected
> - * check links status, there has been known issues of
> - * link loss triggerring long pulse!!!!
> + * If display is now connected check links status,
> + * there has been known issues of link loss triggerring
> + * long pulse.
> + *
> + * Some sinks (eg. ASUS PB287Q) seem to perform some
> + * weird HPD ping pong during modesets. So we can apparely
s/apparely/apparently/
> + * end up with HPD going low during a modeset, and then
> + * going back up soon after. And once that happens we must
> + * retrain the link to get a picture. That's in case no
> + * userspace component reacted to intermittent HPD dip.
Makes sense as the retraining is only applied if the crtc was active
(i.e. the connector was previously connected and trained).
Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
