On Fri, 2017-03-10 at 12:18 +0200, Ander Conselvan de Oliveira wrote:
> Some of the kms_cursor_crc subtests where failing on Geminilake. The
> root cause was an error on programming the pre-CSC gamma tables, which
> led to small rounding errors that, although not sufficient to change the
> image as captured at 8bpc with the Chamelium, were enough to generate a
> different CRC. It is not clear why the rounding is different when the
> cursor is enabled, but this was caught by chance, since the cursor would
> only be exercised with limited color combinations.
>
> To improve coverage, add a test that uses a gradient covering all
> possible 8bit values for a channel.
>
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>
> ---
> tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 38 insertions(+), 4 deletions(-)
>
> diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
> index 4851e18..0b232bf 100644
> --- a/tests/kms_cursor_crc.c
> +++ b/tests/kms_cursor_crc.c
> @@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)
> igt_paint_color_alpha(cr, x + wl, y + ht, wr, hb, 0.5, 0.5, 0.5, 1.0);
> }
>
> +typedef void(*draw_cursor_cb)(cairo_t *cr, int x, int y, int cw, int ch);
> +
> static void cursor_enable(data_t *data)
> {
> igt_output_t *output = data->output;
> @@ -107,7 +109,8 @@ static void cursor_disable(data_t *data)
> }
>
>
> -static void do_single_test(data_t *data, int x, int y)
> +static void do_single_test_with_cursor_cb(data_t *data, int x, int y,
> + draw_cursor_cb cursor_cb)
> {
> igt_display_t *display = &data->display;
> igt_pipe_crc_t *pipe_crc = data->pipe_crc;
> @@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)
> igt_display_commit(display);
>
> /* Now render the same in software and collect crc */
> - draw_cursor(cr, x, y, data->curw, data->curh);
> + cursor_cb(cr, x, y, data->curw, data->curh);
> igt_display_commit(display);
>
> igt_wait_for_vblank(data->drm_fd, data->pipe);
> @@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)
> igt_paint_color(cr, 0, 0, data->screenw, data->screenh, 0.0, 0.0, 0.0);
> }
>
> +static void do_single_test(data_t *data, int x, int y)
> +{
> + do_single_test_with_cursor_cb(data, x, y, draw_cursor);
> +}
> +
> static void do_fail_test(data_t *data, int x, int y, int expect)
> {
> igt_display_t *display = &data->display;
> @@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int
> igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
> }
>
> -static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
> +static void create_cursor_fb_with_cb(data_t *data, int cur_w, int cur_h,
> + draw_cursor_cb cursor_cb)
> {
> cairo_t *cr;
> uint32_t fb_id;
> @@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
> igt_assert(fb_id);
>
> cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
> - draw_cursor(cr, 0, 0, cur_w, cur_h);
> + cursor_cb(cr, 0, 0, cur_w, cur_h);
> igt_assert(cairo_status(cr) == 0);
> }
>
> +static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
> +{
> + create_cursor_fb_with_cb(data, cur_w, cur_h, draw_cursor);
> +}
> +
> static bool has_nonsquare_cursors(uint32_t devid)
> {
> /*
> @@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data)
>
> }
>
> +static void draw_cursor_gradient(cairo_t *cr, int x, int y, int cw, int ch)
> +{
> + cairo_set_antialias(cr, CAIRO_ANTIALIAS_NONE);
> + igt_paint_color_gradient(cr, x, y, cw, ch, 1.0, 1.0, 1.0);
> +}
> +
> +static void test_cursor_colors(data_t *data)
> +{
> + int cursor_w = data->curw;
> + int cursor_h = data->curh;
> +
> + create_cursor_fb_with_cb(data, cursor_w, cursor_h,
> + draw_cursor_gradient);
> + do_single_test_with_cursor_cb(data, 0, 0, draw_cursor_gradient);
> + igt_remove_fb(data->drm_fd, &data->fb);
> +}
> +
> static void run_test_generic(data_t *data)
> {
> int cursor_size;
> @@ -613,6 +644,9 @@ igt_main
> igt_subtest_f("cursor-size-change")
> run_test(&data, test_cursor_size, cursor_width, cursor_height);
>
> + igt_subtest_f("gradient-cursor")
Just realized this needs an igt_require(max_cursor_[wh] >= 256).
Ander
> + run_test(&data, test_cursor_colors, 256, 256);
> +
> run_test_generic(&data);
>
> igt_fixture {
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
