Re: [PATCH i-g-t] tests/kms_atomic: test that TEST_ONLY does not clobber state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2017-03-08 at 15:08 +0100, Maarten Lankhorst wrote:
> Op 17-02-17 om 14:39 schreef Mika Kahola:
> > 
> > We need to make sure that TEST_ONLY really only touches the free-
> > standing
> > state objects and nothing else. Test approach here is the
> > following:
> > 
> > - Create a config and submit it with TEST_ONLY.
> > - do dpms off/on cycle with the current config to reconfigure hw
> > - read back all legacy state to make sure none of that is clobbered
> > 
> > Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> > ---
> >  tests/kms_atomic.c | 79
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 79 insertions(+)
> > 
> > diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
> > index d6273f4..3531fa4 100644
> > --- a/tests/kms_atomic.c
> > +++ b/tests/kms_atomic.c
> > @@ -831,6 +831,25 @@ static uint32_t plane_get_igt_format(struct
> > kms_atomic_plane_state *plane)
> >  	return ret;
> >  }
> >  
> > +static void
> > +set_dpms(int fd, int mode)
> > +{
> > +	int i;
> > +	drmModeConnector *connector;
> > +	uint32_t id;
> > +	drmModeRes *resources = drmModeGetResources(fd);
> > +
> > +	for (i = 0; i < resources->count_connectors; i++) {
> > +		id = resources->connectors[i];
> > +
> > +		connector = drmModeGetConnectorCurrent(fd, id);
> > +
> > +		kmstest_set_connector_dpms(fd, connector, mode);
> > +
> > +		drmModeFreeConnector(connector);
> > +	}
> > +}
> > +
> >  static void plane_overlay(struct kms_atomic_crtc_state *crtc,
> >  			  struct kms_atomic_plane_state
> > *plane_old)
> >  {
> > @@ -930,6 +949,54 @@ static void plane_primary(struct
> > kms_atomic_crtc_state *crtc,
> >  	drmModeAtomicFree(req);
> >  }
> >  
> > +static void plane_primary_state_check(struct kms_atomic_crtc_state
> > *crtc,
> > +				      struct
> > kms_atomic_plane_state *plane_old)
> > +{
> > +	struct drm_mode_modeinfo *mode = crtc->mode.data;
> > +	struct kms_atomic_plane_state plane = *plane_old;
> > +	uint32_t format = plane_get_igt_format(&plane);
> > +	drmModeAtomicReq *req = drmModeAtomicAlloc();
> > +	struct igt_fb fb;
> > +	int ret;
> > +
> > +	igt_require(format != 0);
> > +
> > +	plane.src_x = 0;
> > +	plane.src_y = 0;
> > +	plane.src_w = mode->hdisplay << 16;
> > +	plane.src_h = mode->vdisplay << 16;
> > +	plane.crtc_x = 0;
> > +	plane.crtc_y = 0;
> > +	plane.crtc_w = mode->hdisplay;
> > +	plane.crtc_h = mode->vdisplay;
> > +	plane.crtc_id = crtc->obj;
> > +	plane.fb_id = igt_create_pattern_fb(plane.state->desc->fd,
> > +					    plane.crtc_w,
> > plane.crtc_h,
> > +					    format,
> > I915_TILING_NONE, &fb);
> > +
> > +	drmModeAtomicSetCursor(req, 0);
> > +	crtc_populate_req(crtc, req);
> > +	plane_populate_req(&plane, req);
> > +	ret = drmModeAtomicCommit(crtc->state->desc->fd, req,
> > +				  DRM_MODE_ATOMIC_TEST_ONLY,
> > NULL);
> > +
> > +	igt_assert_eq(ret, 0);
> > +
> > +	/* go through dpms off/on cycle */
> > +	set_dpms(crtc->state->desc->fd, DRM_MODE_DPMS_OFF);
> > +	set_dpms(crtc->state->desc->fd, DRM_MODE_DPMS_ON);
> Is this required? If the state was changed, shouldn't we be able to
> tell through the properties?
I was trying to play safe here and that's why I chose to go through the
whole off/on cycle. 
> > 
> > +	/* check the state */
> > +	crtc_check_current_state(crtc, plane_old,
> > CRTC_RELAX_MODE);
> > +	plane_check_current_state(plane_old, CRTC_RELAX_MODE);
> Copy paste the relax states? Are the RELAXes required since you only
> set/unset the current mode?
yep, this would probably work if changed to ATOMIC_RELAX_NONE.

> > 
> > +	/* Re-enable the plane through the legacy CRTC/primary-
> > plane API, and
> > +	 * verify through atomic. */
> > +	crtc_commit_legacy(crtc, plane_old, CRTC_RELAX_MODE);
> > +
> > +	drmModeAtomicFree(req);
> > +}
> > +
> >  static void plane_cursor(struct kms_atomic_crtc_state *crtc,
> >  			 struct kms_atomic_plane_state *plane_old)
> >  {
> > @@ -1427,6 +1494,18 @@ igt_main
> >  		atomic_state_free(scratch);
> >  	}
> >  
> > +	igt_subtest("plane_primary_state_check") {
> > +		struct kms_atomic_state *scratch =
> > atomic_state_dup(current);
> > +		struct kms_atomic_crtc_state *crtc =
> > find_crtc(scratch, true);
> > +		struct kms_atomic_plane_state *plane =
> > +			find_plane(scratch, PLANE_TYPE_PRIMARY,
> > crtc);
> > +
> > +		igt_require(crtc);
> > +		igt_require(plane);
> > +		plane_primary_state_check(crtc, plane);
> > +		atomic_state_free(scratch);
> > +	}
> Test (and function) name doesn't match the description. It's hard to
> tell what this function is doing from the name. :)
I'm bad at naming things. I'll try to figure out better name.

> > 
> > +
> >  	igt_subtest("plane_cursor_legacy") {
> >  		struct kms_atomic_state *scratch =
> > atomic_state_dup(current);
> >  		struct kms_atomic_crtc_state *crtc =
> > find_crtc(scratch, true);
> With some improvements, test looks sane. :)
Thanks for the review!

Cheers,
Mika
> 
> ~Maarten
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux