From: Uma Shankar <uma.shankar@xxxxxxxxx>
Fix the Sequence to program BXT DSI Latch and ULPS.
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
Signed-off-by: Vidya Srinivas <vidya.srinivas@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi.c | 23 +++++------------------
1 file changed, 5 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index c297ea9..538755b 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -366,32 +366,19 @@ static void bxt_dsi_device_ready(struct intel_encoder *encoder)
DRM_DEBUG_KMS("\n");
- /* Exit Low power state in 4 steps*/
+ /* Enable MIPI PHY transparent latch */
for_each_dsi_port(port, intel_dsi->ports) {
-
- /* 1. Enable MIPI PHY transparent latch */
val = I915_READ(BXT_MIPI_PORT_CTRL(port));
I915_WRITE(BXT_MIPI_PORT_CTRL(port), val | LP_OUTPUT_HOLD);
usleep_range(2000, 2500);
+ }
- /* 2. Enter ULPS */
- val = I915_READ(MIPI_DEVICE_READY(port));
- val &= ~ULPS_STATE_MASK;
- val |= (ULPS_STATE_ENTER | DEVICE_READY);
- I915_WRITE(MIPI_DEVICE_READY(port), val);
- /* at least 2us - relaxed for hrtimer subsystem optimization */
- usleep_range(10, 50);
-
- /* 3. Exit ULPS */
+ /* Clear ULPS and set device ready */
+ for_each_dsi_port(port, intel_dsi->ports) {
val = I915_READ(MIPI_DEVICE_READY(port));
val &= ~ULPS_STATE_MASK;
- val |= (ULPS_STATE_EXIT | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
- usleep_range(1000, 1500);
-
- /* Clear ULPS and set device ready */
- val = I915_READ(MIPI_DEVICE_READY(port));
- val &= ~ULPS_STATE_MASK;
+ usleep_range(2000, 2500);
val |= DEVICE_READY;
I915_WRITE(MIPI_DEVICE_READY(port), val);
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
