From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Let's try to shrink intel_display.c a bit by moving the cdclk/rawclk stuff to a new file. It's all reasonably self contained so we don't even have to add that many non-static symbols. We'll also take the opportunity to shuffle around the functions a bit to get things in a more consistent order based on the platform. v2: Add kernel-docs (Ander) v3: Deal with IS_GEN9_BC() v4: Deal with i945gm_get_cdclk() Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@xxxxxxxxx> Link: http://patchwork.freedesktop.org/patch/msgid/20170120182205.8141-6-ville.syrjala@xxxxxxxxxxxxxxx --- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_cdclk.c | 1794 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 1697 +------------------------------- drivers/gpu/drm/i915/intel_drv.h | 9 +- 5 files changed, 1816 insertions(+), 1694 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_cdclk.c diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 104296dffad1..1cd0ee518dee 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -213,6 +213,15 @@ Video BIOS Table (VBT) .. kernel-doc:: drivers/gpu/drm/i915/intel_vbt_defs.h :internal: +Display clocks +-------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_cdclk.c + :doc: CDCLK / RAWCLK + +.. kernel-doc:: drivers/gpu/drm/i915/intel_cdclk.c + :internal: + Display PLLs ------------ diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 74ca2e8b2494..e58fc8f1b83b 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -72,6 +72,7 @@ i915-y += intel_audio.o \ intel_atomic.o \ intel_atomic_plane.o \ intel_bios.o \ + intel_cdclk.o \ intel_color.o \ intel_display.o \ intel_dpio_phy.o \ diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c new file mode 100644 index 000000000000..04a46c14c898 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -0,0 +1,1794 @@ +/* + * Copyright © 2006-2017 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include "intel_drv.h" + +/** + * DOC: CDCLK / RAWCLK + * + * The display engine uses several different clocks to do its work. There + * are two main clocks involved that aren't directly related to the actual + * pixel clock or any symbol/bit clock of the actual output port. These + * are the core display clock (CDCLK) and RAWCLK. + * + * CDCLK clocks most of the display pipe logic, and thus its frequency + * must be high enough to support the rate at which pixels are flowing + * through the pipes. Downscaling must also be accounted as that increases + * the effective pixel rate. + * + * On several platforms the CDCLK frequency can be changed dynamically + * to minimize power consumption for a given display configuration. + * Typically changes to the CDCLK frequency require all the display pipes + * to be shut down while the frequency is being changed. + * + * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit. + * DMC will not change the active CDCLK frequency however, so that part + * will still be performed by the driver directly. + * + * RAWCLK is a fixed frequency clock, often used by various auxiliary + * blocks such as AUX CH or backlight PWM. Hence the only thing we + * really need to know about RAWCLK is its frequency so that various + * dividers can be programmed correctly. + */ + +static int fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv) +{ + return 133333; +} + +static int fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv) +{ + return 200000; +} + +static int fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv) +{ + return 266667; +} + +static int fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv) +{ + return 333333; +} + +static int fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv) +{ + return 400000; +} + +static int fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv) +{ + return 450000; +} + +static int i85x_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 hpllcc = 0; + + /* + * 852GM/852GMV only supports 133 MHz and the HPLLCC + * encoding is different :( + * FIXME is this the right way to detect 852GM/852GMV? + */ + if (pdev->revision == 0x1) + return 133333; + + pci_bus_read_config_word(pdev->bus, + PCI_DEVFN(0, 3), HPLLCC, &hpllcc); + + /* Assume that the hardware is in the high speed state. This + * should be the default. + */ + switch (hpllcc & GC_CLOCK_CONTROL_MASK) { + case GC_CLOCK_133_200: + case GC_CLOCK_133_200_2: + case GC_CLOCK_100_200: + return 200000; + case GC_CLOCK_166_250: + return 250000; + case GC_CLOCK_100_133: + return 133333; + case GC_CLOCK_133_266: + case GC_CLOCK_133_266_2: + case GC_CLOCK_166_266: + return 266667; + } + + /* Shouldn't happen */ + return 0; +} + +static int i915gm_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 gcfgc = 0; + + pci_read_config_word(pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) + return 133333; + + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_320_MHZ: + return 333333; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + return 190000; + } +} + +static int i945gm_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 gcfgc = 0; + + pci_read_config_word(pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) + return 133333; + + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_320_MHZ: + return 320000; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + return 200000; + } +} + +static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv) +{ + static const unsigned int blb_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + [4] = 6400000, + }; + static const unsigned int pnv_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + [4] = 2666667, + }; + static const unsigned int cl_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 6400000, + [4] = 3333333, + [5] = 3566667, + [6] = 4266667, + }; + static const unsigned int elk_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + }; + static const unsigned int ctg_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 6400000, + [4] = 2666667, + [5] = 4266667, + }; + const unsigned int *vco_table; + unsigned int vco; + uint8_t tmp = 0; + + /* FIXME other chipsets? */ + if (IS_GM45(dev_priv)) + vco_table = ctg_vco; + else if (IS_G4X(dev_priv)) + vco_table = elk_vco; + else if (IS_I965GM(dev_priv)) + vco_table = cl_vco; + else if (IS_PINEVIEW(dev_priv)) + vco_table = pnv_vco; + else if (IS_G33(dev_priv)) + vco_table = blb_vco; + else + return 0; + + tmp = I915_READ(IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO); + + vco = vco_table[tmp & 0x7]; + if (vco == 0) + DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp); + else + DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco); + + return vco; +} + +static int g33_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 }; + static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 }; + static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 }; + static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 }; + const uint8_t *div_table; + unsigned int cdclk_sel, vco = intel_hpll_vco(dev_priv); + uint16_t tmp = 0; + + pci_read_config_word(pdev, GCFGC, &tmp); + + cdclk_sel = (tmp >> 4) & 0x7; + + if (cdclk_sel >= ARRAY_SIZE(div_3200)) + goto fail; + + switch (vco) { + case 3200000: + div_table = div_3200; + break; + case 4000000: + div_table = div_4000; + break; + case 4800000: + div_table = div_4800; + break; + case 5333333: + div_table = div_5333; + break; + default: + goto fail; + } + + return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]); + +fail: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", + vco, tmp); + return 190476; +} + +static int pnv_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 gcfgc = 0; + + pci_read_config_word(pdev, GCFGC, &gcfgc); + + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_267_MHZ_PNV: + return 266667; + case GC_DISPLAY_CLOCK_333_MHZ_PNV: + return 333333; + case GC_DISPLAY_CLOCK_444_MHZ_PNV: + return 444444; + case GC_DISPLAY_CLOCK_200_MHZ_PNV: + return 200000; + default: + DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc); + case GC_DISPLAY_CLOCK_133_MHZ_PNV: + return 133333; + case GC_DISPLAY_CLOCK_167_MHZ_PNV: + return 166667; + } +} + +static int i965gm_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + static const uint8_t div_3200[] = { 16, 10, 8 }; + static const uint8_t div_4000[] = { 20, 12, 10 }; + static const uint8_t div_5333[] = { 24, 16, 14 }; + const uint8_t *div_table; + unsigned int cdclk_sel, vco = intel_hpll_vco(dev_priv); + uint16_t tmp = 0; + + pci_read_config_word(pdev, GCFGC, &tmp); + + cdclk_sel = ((tmp >> 8) & 0x1f) - 1; + + if (cdclk_sel >= ARRAY_SIZE(div_3200)) + goto fail; + + switch (vco) { + case 3200000: + div_table = div_3200; + break; + case 4000000: + div_table = div_4000; + break; + case 5333333: + div_table = div_5333; + break; + default: + goto fail; + } + + return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]); + +fail: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", + vco, tmp); + return 200000; +} + +static int gm45_get_cdclk(struct drm_i915_private *dev_priv) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + unsigned int cdclk_sel, vco = intel_hpll_vco(dev_priv); + uint16_t tmp = 0; + + pci_read_config_word(pdev, GCFGC, &tmp); + + cdclk_sel = (tmp >> 12) & 0x1; + + switch (vco) { + case 2666667: + case 4000000: + case 5333333: + return cdclk_sel ? 333333 : 222222; + case 3200000: + return cdclk_sel ? 320000 : 228571; + default: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", + vco, tmp); + return 222222; + } +} + +static int hsw_get_cdclk(struct drm_i915_private *dev_priv) +{ + uint32_t lcpll = I915_READ(LCPLL_CTL); + uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; + + if (lcpll & LCPLL_CD_SOURCE_FCLK) + return 800000; + else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + return 450000; + else if (freq == LCPLL_CLK_FREQ_450) + return 450000; + else if (IS_HSW_ULT(dev_priv)) + return 337500; + else + return 540000; +} + +static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, + int max_pixclk) +{ + int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? + 333333 : 320000; + int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90; + + /* + * We seem to get an unstable or solid color picture at 200MHz. + * Not sure what's wrong. For now use 200MHz only when all pipes + * are off. + */ + if (!IS_CHERRYVIEW(dev_priv) && + max_pixclk > freq_320*limit/100) + return 400000; + else if (max_pixclk > 266667*limit/100) + return freq_320; + else if (max_pixclk > 0) + return 266667; + else + return 200000; +} + +static int vlv_get_cdclk(struct drm_i915_private *dev_priv) +{ + return vlv_get_cck_clock_hpll(dev_priv, "cdclk", + CCK_DISPLAY_CLOCK_CONTROL); +} + +static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) +{ + unsigned int credits, default_credits; + + if (IS_CHERRYVIEW(dev_priv)) + default_credits = PFI_CREDIT(12); + else + default_credits = PFI_CREDIT(8); + + if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) { + /* CHV suggested value is 31 or 63 */ + if (IS_CHERRYVIEW(dev_priv)) + credits = PFI_CREDIT_63; + else + credits = PFI_CREDIT(15); + } else { + credits = default_credits; + } + + /* + * WA - write default credits before re-programming + * FIXME: should we also set the resend bit here? + */ + I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE | + default_credits); + + I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE | + credits | PFI_CREDIT_RESEND); + + /* + * FIXME is this guaranteed to clear + * immediately or should we poll for it? + */ + WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND); +} + +static void vlv_set_cdclk(struct drm_device *dev, int cdclk) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + u32 val, cmd; + + WARN_ON(dev_priv->display.get_cdclk(dev_priv) != dev_priv->cdclk_freq); + + if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */ + cmd = 2; + else if (cdclk == 266667) + cmd = 1; + else + cmd = 0; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + val &= ~DSPFREQGUAR_MASK; + val |= (cmd << DSPFREQGUAR_SHIFT); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & + DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), + 50)) { + DRM_ERROR("timed out waiting for CDclk change\n"); + } + mutex_unlock(&dev_priv->rps.hw_lock); + + mutex_lock(&dev_priv->sb_lock); + + if (cdclk == 400000) { + u32 divider; + + divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, + cdclk) - 1; + + /* adjust cdclk divider */ + val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); + val &= ~CCK_FREQUENCY_VALUES; + val |= divider; + vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); + + if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) & + CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT), + 50)) + DRM_ERROR("timed out waiting for CDclk change\n"); + } + + /* adjust self-refresh exit latency value */ + val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); + val &= ~0x7f; + + /* + * For high bandwidth configs, we set a higher latency in the bunit + * so that the core display fetch happens in time to avoid underruns. + */ + if (cdclk == 400000) + val |= 4500 / 250; /* 4.5 usec */ + else + val |= 3000 / 250; /* 3.0 usec */ + vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); + + mutex_unlock(&dev_priv->sb_lock); + + intel_update_cdclk(dev_priv); +} + +static void chv_set_cdclk(struct drm_device *dev, int cdclk) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + u32 val, cmd; + + WARN_ON(dev_priv->display.get_cdclk(dev_priv) != dev_priv->cdclk_freq); + + switch (cdclk) { + case 333333: + case 320000: + case 266667: + case 200000: + break; + default: + MISSING_CASE(cdclk); + return; + } + + /* + * Specs are full of misinformation, but testing on actual + * hardware has shown that we just need to write the desired + * CCK divider into the Punit register. + */ + cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + val &= ~DSPFREQGUAR_MASK_CHV; + val |= (cmd << DSPFREQGUAR_SHIFT_CHV); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & + DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV), + 50)) { + DRM_ERROR("timed out waiting for CDclk change\n"); + } + mutex_unlock(&dev_priv->rps.hw_lock); + + intel_update_cdclk(dev_priv); +} + +static int bdw_calc_cdclk(int max_pixclk) +{ + if (max_pixclk > 540000) + return 675000; + else if (max_pixclk > 450000) + return 540000; + else if (max_pixclk > 337500) + return 450000; + else + return 337500; +} + +static int bdw_get_cdclk(struct drm_i915_private *dev_priv) +{ + uint32_t lcpll = I915_READ(LCPLL_CTL); + uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; + + if (lcpll & LCPLL_CD_SOURCE_FCLK) + return 800000; + else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + return 450000; + else if (freq == LCPLL_CLK_FREQ_450) + return 450000; + else if (freq == LCPLL_CLK_FREQ_54O_BDW) + return 540000; + else if (freq == LCPLL_CLK_FREQ_337_5_BDW) + return 337500; + else + return 675000; +} + +static void bdw_set_cdclk(struct drm_device *dev, int cdclk) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + uint32_t val, data; + int ret; + + if (WARN((I915_READ(LCPLL_CTL) & + (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK | + LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE | + LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW | + LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK, + "trying to change cdclk frequency with cdclk not enabled\n")) + return; + + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, + BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0); + mutex_unlock(&dev_priv->rps.hw_lock); + if (ret) { + DRM_ERROR("failed to inform pcode about cdclk change\n"); + return; + } + + val = I915_READ(LCPLL_CTL); + val |= LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) + DRM_ERROR("Switching to FCLK failed\n"); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CLK_FREQ_MASK; + + switch (cdclk) { + case 450000: + val |= LCPLL_CLK_FREQ_450; + data = 0; + break; + case 540000: + val |= LCPLL_CLK_FREQ_54O_BDW; + data = 1; + break; + case 337500: + val |= LCPLL_CLK_FREQ_337_5_BDW; + data = 2; + break; + case 675000: + val |= LCPLL_CLK_FREQ_675_BDW; + data = 3; + break; + default: + WARN(1, "invalid cdclk frequency\n"); + return; + } + + I915_WRITE(LCPLL_CTL, val); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + DRM_ERROR("Switching back to LCPLL failed\n"); + + mutex_lock(&dev_priv->rps.hw_lock); + sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data); + mutex_unlock(&dev_priv->rps.hw_lock); + + I915_WRITE(CDCLK_FREQ, DIV_ROUND_CLOSEST(cdclk, 1000) - 1); + + intel_update_cdclk(dev_priv); + + WARN(cdclk != dev_priv->cdclk_freq, + "cdclk requested %d kHz but got %d kHz\n", + cdclk, dev_priv->cdclk_freq); +} + +static int skl_calc_cdclk(int max_pixclk, int vco) +{ + if (vco == 8640000) { + if (max_pixclk > 540000) + return 617143; + else if (max_pixclk > 432000) + return 540000; + else if (max_pixclk > 308571) + return 432000; + else + return 308571; + } else { + if (max_pixclk > 540000) + return 675000; + else if (max_pixclk > 450000) + return 540000; + else if (max_pixclk > 337500) + return 450000; + else + return 337500; + } +} + +static void skl_dpll0_update(struct drm_i915_private *dev_priv) +{ + u32 val; + + dev_priv->cdclk_pll.ref = 24000; + dev_priv->cdclk_pll.vco = 0; + + val = I915_READ(LCPLL1_CTL); + if ((val & LCPLL_PLL_ENABLE) == 0) + return; + + if (WARN_ON((val & LCPLL_PLL_LOCK) == 0)) + return; + + val = I915_READ(DPLL_CTRL1); + + if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | + DPLL_CTRL1_SSC(SKL_DPLL0) | + DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) != + DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) + return; + + switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) { + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0): + dev_priv->cdclk_pll.vco = 8100000; + break; + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0): + dev_priv->cdclk_pll.vco = 8640000; + break; + default: + MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); + break; + } +} + +static int skl_get_cdclk(struct drm_i915_private *dev_priv) +{ + u32 cdctl; + + skl_dpll0_update(dev_priv); + + if (dev_priv->cdclk_pll.vco == 0) + return dev_priv->cdclk_pll.ref; + + cdctl = I915_READ(CDCLK_CTL); + + if (dev_priv->cdclk_pll.vco == 8640000) { + switch (cdctl & CDCLK_FREQ_SEL_MASK) { + case CDCLK_FREQ_450_432: + return 432000; + case CDCLK_FREQ_337_308: + return 308571; + case CDCLK_FREQ_540: + return 540000; + case CDCLK_FREQ_675_617: + return 617143; + default: + MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); + } + } else { + switch (cdctl & CDCLK_FREQ_SEL_MASK) { + case CDCLK_FREQ_450_432: + return 450000; + case CDCLK_FREQ_337_308: + return 337500; + case CDCLK_FREQ_540: + return 540000; + case CDCLK_FREQ_675_617: + return 675000; + default: + MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); + } + } + + return dev_priv->cdclk_pll.ref; +} + +/* convert from kHz to .1 fixpoint MHz with -1MHz offset */ +static int skl_cdclk_decimal(int cdclk) +{ + return DIV_ROUND_CLOSEST(cdclk - 1000, 500); +} + +static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, + int vco) +{ + bool changed = dev_priv->skl_preferred_vco_freq != vco; + + dev_priv->skl_preferred_vco_freq = vco; + + if (changed) + intel_update_max_cdclk(dev_priv); +} + +static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco) +{ + int min_cdclk = skl_calc_cdclk(0, vco); + u32 val; + + WARN_ON(vco != 8100000 && vco != 8640000); + + /* select the minimum CDCLK before enabling DPLL 0 */ + val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk); + I915_WRITE(CDCLK_CTL, val); + POSTING_READ(CDCLK_CTL); + + /* + * We always enable DPLL0 with the lowest link rate possible, but still + * taking into account the VCO required to operate the eDP panel at the + * desired frequency. The usual DP link rates operate with a VCO of + * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640. + * The modeset code is responsible for the selection of the exact link + * rate later on, with the constraint of choosing a frequency that + * works with vco. + */ + val = I915_READ(DPLL_CTRL1); + + val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) | + DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); + val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0); + if (vco == 8640000) + val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, + SKL_DPLL0); + else + val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, + SKL_DPLL0); + + I915_WRITE(DPLL_CTRL1, val); + POSTING_READ(DPLL_CTRL1); + + I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE); + + if (intel_wait_for_register(dev_priv, + LCPLL1_CTL, LCPLL_PLL_LOCK, LCPLL_PLL_LOCK, + 5)) + DRM_ERROR("DPLL0 not locked\n"); + + dev_priv->cdclk_pll.vco = vco; + + /* We'll want to keep using the current vco from now on. */ + skl_set_preferred_cdclk_vco(dev_priv, vco); +} + +static void skl_dpll0_disable(struct drm_i915_private *dev_priv) +{ + I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE); + if (intel_wait_for_register(dev_priv, + LCPLL1_CTL, LCPLL_PLL_LOCK, 0, + 1)) + DRM_ERROR("Couldn't disable DPLL0\n"); + + dev_priv->cdclk_pll.vco = 0; +} + +static void skl_set_cdclk(struct drm_i915_private *dev_priv, + int cdclk, int vco) +{ + u32 freq_select, pcu_ack; + int ret; + + WARN_ON((cdclk == 24000) != (vco == 0)); + + DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", + cdclk, vco); + + mutex_lock(&dev_priv->rps.hw_lock); + ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL, + SKL_CDCLK_PREPARE_FOR_CHANGE, + SKL_CDCLK_READY_FOR_CHANGE, + SKL_CDCLK_READY_FOR_CHANGE, 3); + mutex_unlock(&dev_priv->rps.hw_lock); + if (ret) { + DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n", + ret); + return; + } + + /* set CDCLK_CTL */ + switch (cdclk) { + case 450000: + case 432000: + freq_select = CDCLK_FREQ_450_432; + pcu_ack = 1; + break; + case 540000: + freq_select = CDCLK_FREQ_540; + pcu_ack = 2; + break; + case 308571: + case 337500: + default: + freq_select = CDCLK_FREQ_337_308; + pcu_ack = 0; + break; + case 617143: + case 675000: + freq_select = CDCLK_FREQ_675_617; + pcu_ack = 3; + break; + } + + if (dev_priv->cdclk_pll.vco != 0 && + dev_priv->cdclk_pll.vco != vco) + skl_dpll0_disable(dev_priv); + + if (dev_priv->cdclk_pll.vco != vco) + skl_dpll0_enable(dev_priv, vco); + + I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk)); + POSTING_READ(CDCLK_CTL); + + /* inform PCU of the change */ + mutex_lock(&dev_priv->rps.hw_lock); + sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack); + mutex_unlock(&dev_priv->rps.hw_lock); + + intel_update_cdclk(dev_priv); +} + +static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv) +{ + uint32_t cdctl, expected; + + /* + * check if the pre-os initialized the display + * There is SWF18 scratchpad register defined which is set by the + * pre-os which can be used by the OS drivers to check the status + */ + if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0) + goto sanitize; + + intel_update_cdclk(dev_priv); + /* Is PLL enabled and locked ? */ + if (dev_priv->cdclk_pll.vco == 0 || + dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref) + goto sanitize; + + /* DPLL okay; verify the cdclock + * + * Noticed in some instances that the freq selection is correct but + * decimal part is programmed wrong from BIOS where pre-os does not + * enable display. Verify the same as well. + */ + cdctl = I915_READ(CDCLK_CTL); + expected = (cdctl & CDCLK_FREQ_SEL_MASK) | + skl_cdclk_decimal(dev_priv->cdclk_freq); + if (cdctl == expected) + /* All well; nothing to sanitize */ + return; + +sanitize: + DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); + + /* force cdclk programming */ + dev_priv->cdclk_freq = 0; + /* force full PLL disable + enable */ + dev_priv->cdclk_pll.vco = -1; +} + +/** + * skl_init_cdclk - Initialize CDCLK on SKL + * @dev_priv: i915 device + * + * Initialize CDCLK for SKL and derivatives. This is generally + * done only during the display core initialization sequence, + * after which the DMC will take care of turning CDCLK off/on + * as needed. + */ +void skl_init_cdclk(struct drm_i915_private *dev_priv) +{ + int cdclk, vco; + + skl_sanitize_cdclk(dev_priv); + + if (dev_priv->cdclk_freq != 0 && dev_priv->cdclk_pll.vco != 0) { + /* + * Use the current vco as our initial + * guess as to what the preferred vco is. + */ + if (dev_priv->skl_preferred_vco_freq == 0) + skl_set_preferred_cdclk_vco(dev_priv, + dev_priv->cdclk_pll.vco); + return; + } + + vco = dev_priv->skl_preferred_vco_freq; + if (vco == 0) + vco = 8100000; + cdclk = skl_calc_cdclk(0, vco); + + skl_set_cdclk(dev_priv, cdclk, vco); +} + +/** + * skl_uninit_cdclk - Uninitialize CDCLK on SKL + * @dev_priv: i915 device + * + * Uninitialize CDCLK for SKL and derivatives. This is done only + * during the display core uninitialization sequence. + */ +void skl_uninit_cdclk(struct drm_i915_private *dev_priv) +{ + skl_set_cdclk(dev_priv, dev_priv->cdclk_pll.ref, 0); +} + +static int bxt_calc_cdclk(int max_pixclk) +{ + if (max_pixclk > 576000) + return 624000; + else if (max_pixclk > 384000) + return 576000; + else if (max_pixclk > 288000) + return 384000; + else if (max_pixclk > 144000) + return 288000; + else + return 144000; +} + +static int glk_calc_cdclk(int max_pixclk) +{ + if (max_pixclk > 2 * 158400) + return 316800; + else if (max_pixclk > 2 * 79200) + return 158400; + else + return 79200; +} + +static int bxt_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk) +{ + int ratio; + + if (cdclk == dev_priv->cdclk_pll.ref) + return 0; + + switch (cdclk) { + default: + MISSING_CASE(cdclk); + case 144000: + case 288000: + case 384000: + case 576000: + ratio = 60; + break; + case 624000: + ratio = 65; + break; + } + + return dev_priv->cdclk_pll.ref * ratio; +} + +static int glk_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk) +{ + int ratio; + + if (cdclk == dev_priv->cdclk_pll.ref) + return 0; + + switch (cdclk) { + default: + MISSING_CASE(cdclk); + case 79200: + case 158400: + case 316800: + ratio = 33; + break; + } + + return dev_priv->cdclk_pll.ref * ratio; +} + +static void bxt_de_pll_update(struct drm_i915_private *dev_priv) +{ + u32 val; + + dev_priv->cdclk_pll.ref = 19200; + dev_priv->cdclk_pll.vco = 0; + + val = I915_READ(BXT_DE_PLL_ENABLE); + if ((val & BXT_DE_PLL_PLL_ENABLE) == 0) + return; + + if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0)) + return; + + val = I915_READ(BXT_DE_PLL_CTL); + dev_priv->cdclk_pll.vco = (val & BXT_DE_PLL_RATIO_MASK) * + dev_priv->cdclk_pll.ref; +} + +static int bxt_get_cdclk(struct drm_i915_private *dev_priv) +{ + u32 divider; + int div, vco; + + bxt_de_pll_update(dev_priv); + + vco = dev_priv->cdclk_pll.vco; + if (vco == 0) + return dev_priv->cdclk_pll.ref; + + divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK; + + switch (divider) { + case BXT_CDCLK_CD2X_DIV_SEL_1: + div = 2; + break; + case BXT_CDCLK_CD2X_DIV_SEL_1_5: + WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n"); + div = 3; + break; + case BXT_CDCLK_CD2X_DIV_SEL_2: + div = 4; + break; + case BXT_CDCLK_CD2X_DIV_SEL_4: + div = 8; + break; + default: + MISSING_CASE(divider); + return dev_priv->cdclk_pll.ref; + } + + return DIV_ROUND_CLOSEST(vco, div); +} + +static void bxt_de_pll_disable(struct drm_i915_private *dev_priv) +{ + I915_WRITE(BXT_DE_PLL_ENABLE, 0); + + /* Timeout 200us */ + if (intel_wait_for_register(dev_priv, + BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 0, + 1)) + DRM_ERROR("timeout waiting for DE PLL unlock\n"); + + dev_priv->cdclk_pll.vco = 0; +} + +static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco) +{ + int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk_pll.ref); + u32 val; + + val = I915_READ(BXT_DE_PLL_CTL); + val &= ~BXT_DE_PLL_RATIO_MASK; + val |= BXT_DE_PLL_RATIO(ratio); + I915_WRITE(BXT_DE_PLL_CTL, val); + + I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE); + + /* Timeout 200us */ + if (intel_wait_for_register(dev_priv, + BXT_DE_PLL_ENABLE, + BXT_DE_PLL_LOCK, + BXT_DE_PLL_LOCK, + 1)) + DRM_ERROR("timeout waiting for DE PLL lock\n"); + + dev_priv->cdclk_pll.vco = vco; +} + +static void bxt_set_cdclk(struct drm_i915_private *dev_priv, int cdclk) +{ + u32 val, divider; + int vco, ret; + + if (IS_GEMINILAKE(dev_priv)) + vco = glk_de_pll_vco(dev_priv, cdclk); + else + vco = bxt_de_pll_vco(dev_priv, cdclk); + + DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", + cdclk, vco); + + /* cdclk = vco / 2 / div{1,1.5,2,4} */ + switch (DIV_ROUND_CLOSEST(vco, cdclk)) { + case 8: + divider = BXT_CDCLK_CD2X_DIV_SEL_4; + break; + case 4: + divider = BXT_CDCLK_CD2X_DIV_SEL_2; + break; + case 3: + WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n"); + divider = BXT_CDCLK_CD2X_DIV_SEL_1_5; + break; + case 2: + divider = BXT_CDCLK_CD2X_DIV_SEL_1; + break; + default: + WARN_ON(cdclk != dev_priv->cdclk_pll.ref); + WARN_ON(vco != 0); + + divider = BXT_CDCLK_CD2X_DIV_SEL_1; + break; + } + + /* Inform power controller of upcoming frequency change */ + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, + 0x80000000); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret) { + DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n", + ret, cdclk); + return; + } + + if (dev_priv->cdclk_pll.vco != 0 && + dev_priv->cdclk_pll.vco != vco) + bxt_de_pll_disable(dev_priv); + + if (dev_priv->cdclk_pll.vco != vco) + bxt_de_pll_enable(dev_priv, vco); + + val = divider | skl_cdclk_decimal(cdclk); + /* + * FIXME if only the cd2x divider needs changing, it could be done + * without shutting off the pipe (if only one pipe is active). + */ + val |= BXT_CDCLK_CD2X_PIPE_NONE; + /* + * Disable SSA Precharge when CD clock frequency < 500 MHz, + * enable otherwise. + */ + if (cdclk >= 500000) + val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; + I915_WRITE(CDCLK_CTL, val); + + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, + DIV_ROUND_UP(cdclk, 25000)); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret) { + DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n", + ret, cdclk); + return; + } + + intel_update_cdclk(dev_priv); +} + +static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv) +{ + u32 cdctl, expected; + + intel_update_cdclk(dev_priv); + + if (dev_priv->cdclk_pll.vco == 0 || + dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref) + goto sanitize; + + /* DPLL okay; verify the cdclock + * + * Some BIOS versions leave an incorrect decimal frequency value and + * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4, + * so sanitize this register. + */ + cdctl = I915_READ(CDCLK_CTL); + /* + * Let's ignore the pipe field, since BIOS could have configured the + * dividers both synching to an active pipe, or asynchronously + * (PIPE_NONE). + */ + cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE; + + expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) | + skl_cdclk_decimal(dev_priv->cdclk_freq); + /* + * Disable SSA Precharge when CD clock frequency < 500 MHz, + * enable otherwise. + */ + if (dev_priv->cdclk_freq >= 500000) + expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; + + if (cdctl == expected) + /* All well; nothing to sanitize */ + return; + +sanitize: + DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); + + /* force cdclk programming */ + dev_priv->cdclk_freq = 0; + + /* force full PLL disable + enable */ + dev_priv->cdclk_pll.vco = -1; +} + +/** + * bxt_init_cdclk - Initialize CDCLK on BXT + * @dev_priv: i915 device + * + * Initialize CDCLK for BXT and derivatives. This is generally + * done only during the display core initialization sequence, + * after which the DMC will take care of turning CDCLK off/on + * as needed. + */ +void bxt_init_cdclk(struct drm_i915_private *dev_priv) +{ + int cdclk; + + bxt_sanitize_cdclk(dev_priv); + + if (dev_priv->cdclk_freq != 0 && dev_priv->cdclk_pll.vco != 0) + return; + + /* + * FIXME: + * - The initial CDCLK needs to be read from VBT. + * Need to make this change after VBT has changes for BXT. + */ + if (IS_GEMINILAKE(dev_priv)) + cdclk = glk_calc_cdclk(0); + else + cdclk = bxt_calc_cdclk(0); + + bxt_set_cdclk(dev_priv, cdclk); +} + +/** + * bxt_uninit_cdclk - Uninitialize CDCLK on BXT + * @dev_priv: i915 device + * + * Uninitialize CDCLK for BXT and derivatives. This is done only + * during the display core uninitialization sequence. + */ +void bxt_uninit_cdclk(struct drm_i915_private *dev_priv) +{ + bxt_set_cdclk(dev_priv, dev_priv->cdclk_pll.ref); +} + +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + struct drm_i915_private *dev_priv = + to_i915(crtc_state->base.crtc->dev); + + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than + * 432 MHz, audio enabled, port width x4, and link rate + * HBR2 (5.4 GHz), or else there may be audio corruption or + * screen corruption." + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) + pixel_rate = max(432000, pixel_rate); + + return pixel_rate; +} + +/* compute the max rate for new configuration */ +static int intel_max_pixel_rate(struct drm_atomic_state *state) +{ + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct drm_crtc *crtc; + struct drm_crtc_state *cstate; + struct intel_crtc_state *crtc_state; + unsigned int max_pixel_rate = 0, i; + enum pipe pipe; + + memcpy(intel_state->min_pixclk, dev_priv->min_pixclk, + sizeof(intel_state->min_pixclk)); + + for_each_crtc_in_state(state, crtc, cstate, i) { + int pixel_rate; + + crtc_state = to_intel_crtc_state(cstate); + if (!crtc_state->base.enable) { + intel_state->min_pixclk[i] = 0; + continue; + } + + pixel_rate = crtc_state->pixel_rate; + + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) + pixel_rate = + bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); + + intel_state->min_pixclk[i] = pixel_rate; + } + + for_each_pipe(dev_priv, pipe) + max_pixel_rate = max(intel_state->min_pixclk[pipe], + max_pixel_rate); + + return max_pixel_rate; +} + +static int vlv_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + int max_pixclk = intel_max_pixel_rate(state); + struct intel_atomic_state *intel_state = + to_intel_atomic_state(state); + + intel_state->cdclk = intel_state->dev_cdclk = + vlv_calc_cdclk(dev_priv, max_pixclk); + + if (!intel_state->active_crtcs) + intel_state->dev_cdclk = vlv_calc_cdclk(dev_priv, 0); + + return 0; +} + +static void vlv_modeset_commit_cdclk(struct drm_atomic_state *old_state) +{ + struct drm_device *dev = old_state->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_atomic_state *old_intel_state = + to_intel_atomic_state(old_state); + unsigned int req_cdclk = old_intel_state->dev_cdclk; + + /* + * FIXME: We can end up here with all power domains off, yet + * with a CDCLK frequency other than the minimum. To account + * for this take the PIPE-A power domain, which covers the HW + * blocks needed for the following programming. This can be + * removed once it's guaranteed that we get here either with + * the minimum CDCLK set, or the required power domains + * enabled. + */ + intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A); + + if (IS_CHERRYVIEW(dev_priv)) + chv_set_cdclk(dev, req_cdclk); + else + vlv_set_cdclk(dev, req_cdclk); + + vlv_program_pfi_credits(dev_priv); + + intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A); +} + +static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + int max_pixclk = intel_max_pixel_rate(state); + int cdclk; + + /* + * FIXME should also account for plane ratio + * once 64bpp pixel formats are supported. + */ + cdclk = bdw_calc_cdclk(max_pixclk); + + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + return -EINVAL; + } + + intel_state->cdclk = intel_state->dev_cdclk = cdclk; + if (!intel_state->active_crtcs) + intel_state->dev_cdclk = bdw_calc_cdclk(0); + + return 0; +} + +static void bdw_modeset_commit_cdclk(struct drm_atomic_state *old_state) +{ + struct drm_device *dev = old_state->dev; + struct intel_atomic_state *old_intel_state = + to_intel_atomic_state(old_state); + unsigned int req_cdclk = old_intel_state->dev_cdclk; + + bdw_set_cdclk(dev, req_cdclk); +} + +static int skl_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_i915_private *dev_priv = to_i915(state->dev); + const int max_pixclk = intel_max_pixel_rate(state); + int vco = intel_state->cdclk_pll_vco; + int cdclk; + + /* + * FIXME should also account for plane ratio + * once 64bpp pixel formats are supported. + */ + cdclk = skl_calc_cdclk(max_pixclk, vco); + + /* + * FIXME move the cdclk caclulation to + * compute_config() so we can fail gracegully. + */ + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + cdclk = dev_priv->max_cdclk_freq; + } + + intel_state->cdclk = intel_state->dev_cdclk = cdclk; + if (!intel_state->active_crtcs) + intel_state->dev_cdclk = skl_calc_cdclk(0, vco); + + return 0; +} + +static void skl_modeset_commit_cdclk(struct drm_atomic_state *old_state) +{ + struct drm_i915_private *dev_priv = to_i915(old_state->dev); + struct intel_atomic_state *intel_state = + to_intel_atomic_state(old_state); + unsigned int req_cdclk = intel_state->dev_cdclk; + unsigned int req_vco = intel_state->cdclk_pll_vco; + + skl_set_cdclk(dev_priv, req_cdclk, req_vco); +} + +static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + int max_pixclk = intel_max_pixel_rate(state); + struct intel_atomic_state *intel_state = + to_intel_atomic_state(state); + int cdclk; + + if (IS_GEMINILAKE(dev_priv)) + cdclk = glk_calc_cdclk(max_pixclk); + else + cdclk = bxt_calc_cdclk(max_pixclk); + + intel_state->cdclk = intel_state->dev_cdclk = cdclk; + + if (!intel_state->active_crtcs) { + if (IS_GEMINILAKE(dev_priv)) + cdclk = glk_calc_cdclk(0); + else + cdclk = bxt_calc_cdclk(0); + + intel_state->dev_cdclk = cdclk; + } + + return 0; +} + +static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) +{ + struct drm_device *dev = old_state->dev; + struct intel_atomic_state *old_intel_state = + to_intel_atomic_state(old_state); + unsigned int req_cdclk = old_intel_state->dev_cdclk; + + bxt_set_cdclk(to_i915(dev), req_cdclk); +} + +static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) +{ + int max_cdclk_freq = dev_priv->max_cdclk_freq; + + if (IS_GEMINILAKE(dev_priv)) + return 2 * max_cdclk_freq; + else if (INTEL_INFO(dev_priv)->gen >= 9 || + IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) + return max_cdclk_freq; + else if (IS_CHERRYVIEW(dev_priv)) + return max_cdclk_freq*95/100; + else if (INTEL_INFO(dev_priv)->gen < 4) + return 2*max_cdclk_freq*90/100; + else + return max_cdclk_freq*90/100; +} + +/** + * intel_update_max_cdclk - Determine the maximum support CDCLK frequency + * @dev_priv: i915 device + * + * Determine the maximum CDCLK frequency the platform supports, and also + * derive the maximum dot clock frequency the maximum CDCLK frequency + * allows. + */ +void intel_update_max_cdclk(struct drm_i915_private *dev_priv) +{ + if (IS_GEN9_BC(dev_priv)) { + u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK; + int max_cdclk, vco; + + vco = dev_priv->skl_preferred_vco_freq; + WARN_ON(vco != 8100000 && vco != 8640000); + + /* + * Use the lower (vco 8640) cdclk values as a + * first guess. skl_calc_cdclk() will correct it + * if the preferred vco is 8100 instead. + */ + if (limit == SKL_DFSM_CDCLK_LIMIT_675) + max_cdclk = 617143; + else if (limit == SKL_DFSM_CDCLK_LIMIT_540) + max_cdclk = 540000; + else if (limit == SKL_DFSM_CDCLK_LIMIT_450) + max_cdclk = 432000; + else + max_cdclk = 308571; + + dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco); + } else if (IS_GEMINILAKE(dev_priv)) { + dev_priv->max_cdclk_freq = 316800; + } else if (IS_BROXTON(dev_priv)) { + dev_priv->max_cdclk_freq = 624000; + } else if (IS_BROADWELL(dev_priv)) { + /* + * FIXME with extra cooling we can allow + * 540 MHz for ULX and 675 Mhz for ULT. + * How can we know if extra cooling is + * available? PCI ID, VTB, something else? + */ + if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + dev_priv->max_cdclk_freq = 450000; + else if (IS_BDW_ULX(dev_priv)) + dev_priv->max_cdclk_freq = 450000; + else if (IS_BDW_ULT(dev_priv)) + dev_priv->max_cdclk_freq = 540000; + else + dev_priv->max_cdclk_freq = 675000; + } else if (IS_CHERRYVIEW(dev_priv)) { + dev_priv->max_cdclk_freq = 320000; + } else if (IS_VALLEYVIEW(dev_priv)) { + dev_priv->max_cdclk_freq = 400000; + } else { + /* otherwise assume cdclk is fixed */ + dev_priv->max_cdclk_freq = dev_priv->cdclk_freq; + } + + dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv); + + DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n", + dev_priv->max_cdclk_freq); + + DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n", + dev_priv->max_dotclk_freq); +} + +/** + * intel_update_cdclk - Determine the current CDCLK frequency + * @dev_priv: i915 device + * + * Determine the current CDCLK frequency. + */ +void intel_update_cdclk(struct drm_i915_private *dev_priv) +{ + dev_priv->cdclk_freq = dev_priv->display.get_cdclk(dev_priv); + + if (INTEL_GEN(dev_priv) >= 9) + DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz, VCO: %d kHz, ref: %d kHz\n", + dev_priv->cdclk_freq, dev_priv->cdclk_pll.vco, + dev_priv->cdclk_pll.ref); + else + DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n", + dev_priv->cdclk_freq); + + /* + * 9:0 CMBUS [sic] CDCLK frequency (cdfreq): + * Programmng [sic] note: bit[9:2] should be programmed to the number + * of cdclk that generates 4MHz reference clock freq which is used to + * generate GMBus clock. This will vary with the cdclk freq. + */ + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + I915_WRITE(GMBUSFREQ_VLV, + DIV_ROUND_UP(dev_priv->cdclk_freq, 1000)); +} + +static int pch_rawclk(struct drm_i915_private *dev_priv) +{ + return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000; +} + +static int vlv_hrawclk(struct drm_i915_private *dev_priv) +{ + /* RAWCLK_FREQ_VLV register updated from power well code */ + return vlv_get_cck_clock_hpll(dev_priv, "hrawclk", + CCK_DISPLAY_REF_CLOCK_CONTROL); +} + +static int g4x_hrawclk(struct drm_i915_private *dev_priv) +{ + uint32_t clkcfg; + + /* hrawclock is 1/4 the FSB frequency */ + clkcfg = I915_READ(CLKCFG); + switch (clkcfg & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_400: + return 100000; + case CLKCFG_FSB_533: + return 133333; + case CLKCFG_FSB_667: + return 166667; + case CLKCFG_FSB_800: + return 200000; + case CLKCFG_FSB_1067: + return 266667; + case CLKCFG_FSB_1333: + return 333333; + /* these two are just a guess; one of them might be right */ + case CLKCFG_FSB_1600: + case CLKCFG_FSB_1600_ALT: + return 400000; + default: + return 133333; + } +} + +/** + * intel_update_rawclk - Determine the current RAWCLK frequency + * @dev_priv: i915 device + * + * Determine the current RAWCLK frequency. RAWCLK is a fixed + * frequency clock so this needs to done only once. + */ +void intel_update_rawclk(struct drm_i915_private *dev_priv) +{ + if (HAS_PCH_SPLIT(dev_priv)) + dev_priv->rawclk_freq = pch_rawclk(dev_priv); + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + dev_priv->rawclk_freq = vlv_hrawclk(dev_priv); + else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv)) + dev_priv->rawclk_freq = g4x_hrawclk(dev_priv); + else + /* no rawclk on other platforms, or no need to know it */ + return; + + DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq); +} + +/** + * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks + * @dev_priv: i915 device + */ +void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv) +{ + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + dev_priv->display.modeset_commit_cdclk = + vlv_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + vlv_modeset_calc_cdclk; + } else if (IS_BROADWELL(dev_priv)) { + dev_priv->display.modeset_commit_cdclk = + bdw_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + bdw_modeset_calc_cdclk; + } else if (IS_GEN9_LP(dev_priv)) { + dev_priv->display.modeset_commit_cdclk = + bxt_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + bxt_modeset_calc_cdclk; + } else if (IS_GEN9_BC(dev_priv)) { + dev_priv->display.modeset_commit_cdclk = + skl_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + skl_modeset_calc_cdclk; + } + + if (IS_GEN9_BC(dev_priv)) + dev_priv->display.get_cdclk = skl_get_cdclk; + else if (IS_GEN9_LP(dev_priv)) + dev_priv->display.get_cdclk = bxt_get_cdclk; + else if (IS_BROADWELL(dev_priv)) + dev_priv->display.get_cdclk = bdw_get_cdclk; + else if (IS_HASWELL(dev_priv)) + dev_priv->display.get_cdclk = hsw_get_cdclk; + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + dev_priv->display.get_cdclk = vlv_get_cdclk; + else if (IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv)) + dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; + else if (IS_GEN5(dev_priv)) + dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk; + else if (IS_GM45(dev_priv)) + dev_priv->display.get_cdclk = gm45_get_cdclk; + else if (IS_G4X(dev_priv)) + dev_priv->display.get_cdclk = g33_get_cdclk; + else if (IS_I965GM(dev_priv)) + dev_priv->display.get_cdclk = i965gm_get_cdclk; + else if (IS_I965G(dev_priv)) + dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; + else if (IS_PINEVIEW(dev_priv)) + dev_priv->display.get_cdclk = pnv_get_cdclk; + else if (IS_G33(dev_priv)) + dev_priv->display.get_cdclk = g33_get_cdclk; + else if (IS_I945GM(dev_priv)) + dev_priv->display.get_cdclk = i945gm_get_cdclk; + else if (IS_I945G(dev_priv)) + dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; + else if (IS_I915GM(dev_priv)) + dev_priv->display.get_cdclk = i915gm_get_cdclk; + else if (IS_I915G(dev_priv)) + dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk; + else if (IS_I865G(dev_priv)) + dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk; + else if (IS_I85X(dev_priv)) + dev_priv->display.get_cdclk = i85x_get_cdclk; + else if (IS_I845G(dev_priv)) + dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk; + else { /* 830 */ + WARN(!IS_I830(dev_priv), + "Unknown platform. Assuming 133 MHz CDCLK\n"); + dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk; + } +} diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c407cc41c0c9..e996f8ec8f08 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -122,9 +122,6 @@ static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force); static void ironlake_pfit_enable(struct intel_crtc *crtc); static void intel_modeset_setup_hw_state(struct drm_device *dev); static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc); -static int intel_max_pixel_rate(struct drm_atomic_state *state); -static int glk_calc_cdclk(int max_pixclk); -static int bxt_calc_cdclk(int max_pixclk); struct intel_limit { struct { @@ -170,8 +167,8 @@ int vlv_get_cck_clock(struct drm_i915_private *dev_priv, return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1); } -static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, - const char *name, u32 reg) +int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, + const char *name, u32 reg) { if (dev_priv->hpll_freq == 0) dev_priv->hpll_freq = valleyview_get_vco(dev_priv); @@ -180,63 +177,6 @@ static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, dev_priv->hpll_freq); } -static int -intel_pch_rawclk(struct drm_i915_private *dev_priv) -{ - return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000; -} - -static int -intel_vlv_hrawclk(struct drm_i915_private *dev_priv) -{ - /* RAWCLK_FREQ_VLV register updated from power well code */ - return vlv_get_cck_clock_hpll(dev_priv, "hrawclk", - CCK_DISPLAY_REF_CLOCK_CONTROL); -} - -static int -intel_g4x_hrawclk(struct drm_i915_private *dev_priv) -{ - uint32_t clkcfg; - - /* hrawclock is 1/4 the FSB frequency */ - clkcfg = I915_READ(CLKCFG); - switch (clkcfg & CLKCFG_FSB_MASK) { - case CLKCFG_FSB_400: - return 100000; - case CLKCFG_FSB_533: - return 133333; - case CLKCFG_FSB_667: - return 166667; - case CLKCFG_FSB_800: - return 200000; - case CLKCFG_FSB_1067: - return 266667; - case CLKCFG_FSB_1333: - return 333333; - /* these two are just a guess; one of them might be right */ - case CLKCFG_FSB_1600: - case CLKCFG_FSB_1600_ALT: - return 400000; - default: - return 133333; - } -} - -void intel_update_rawclk(struct drm_i915_private *dev_priv) -{ - if (HAS_PCH_SPLIT(dev_priv)) - dev_priv->rawclk_freq = intel_pch_rawclk(dev_priv); - else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) - dev_priv->rawclk_freq = intel_vlv_hrawclk(dev_priv); - else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv)) - dev_priv->rawclk_freq = intel_g4x_hrawclk(dev_priv); - else - return; /* no rawclk on other platforms, or no need to know it */ - - DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq); -} - static void intel_update_czclk(struct drm_i915_private *dev_priv) { if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))) @@ -5791,888 +5731,6 @@ static void modeset_put_power_domains(struct drm_i915_private *dev_priv, intel_display_power_put(dev_priv, domain); } -static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) -{ - int max_cdclk_freq = dev_priv->max_cdclk_freq; - - if (IS_GEMINILAKE(dev_priv)) - return 2 * max_cdclk_freq; - else if (INTEL_INFO(dev_priv)->gen >= 9 || - IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) - return max_cdclk_freq; - else if (IS_CHERRYVIEW(dev_priv)) - return max_cdclk_freq*95/100; - else if (INTEL_INFO(dev_priv)->gen < 4) - return 2*max_cdclk_freq*90/100; - else - return max_cdclk_freq*90/100; -} - -static int skl_calc_cdclk(int max_pixclk, int vco); - -static void intel_update_max_cdclk(struct drm_i915_private *dev_priv) -{ - if (IS_GEN9_BC(dev_priv)) { - u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK; - int max_cdclk, vco; - - vco = dev_priv->skl_preferred_vco_freq; - WARN_ON(vco != 8100000 && vco != 8640000); - - /* - * Use the lower (vco 8640) cdclk values as a - * first guess. skl_calc_cdclk() will correct it - * if the preferred vco is 8100 instead. - */ - if (limit == SKL_DFSM_CDCLK_LIMIT_675) - max_cdclk = 617143; - else if (limit == SKL_DFSM_CDCLK_LIMIT_540) - max_cdclk = 540000; - else if (limit == SKL_DFSM_CDCLK_LIMIT_450) - max_cdclk = 432000; - else - max_cdclk = 308571; - - dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco); - } else if (IS_GEMINILAKE(dev_priv)) { - dev_priv->max_cdclk_freq = 316800; - } else if (IS_BROXTON(dev_priv)) { - dev_priv->max_cdclk_freq = 624000; - } else if (IS_BROADWELL(dev_priv)) { - /* - * FIXME with extra cooling we can allow - * 540 MHz for ULX and 675 Mhz for ULT. - * How can we know if extra cooling is - * available? PCI ID, VTB, something else? - */ - if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) - dev_priv->max_cdclk_freq = 450000; - else if (IS_BDW_ULX(dev_priv)) - dev_priv->max_cdclk_freq = 450000; - else if (IS_BDW_ULT(dev_priv)) - dev_priv->max_cdclk_freq = 540000; - else - dev_priv->max_cdclk_freq = 675000; - } else if (IS_CHERRYVIEW(dev_priv)) { - dev_priv->max_cdclk_freq = 320000; - } else if (IS_VALLEYVIEW(dev_priv)) { - dev_priv->max_cdclk_freq = 400000; - } else { - /* otherwise assume cdclk is fixed */ - dev_priv->max_cdclk_freq = dev_priv->cdclk_freq; - } - - dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv); - - DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n", - dev_priv->max_cdclk_freq); - - DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n", - dev_priv->max_dotclk_freq); -} - -static void intel_update_cdclk(struct drm_i915_private *dev_priv) -{ - dev_priv->cdclk_freq = dev_priv->display.get_cdclk(dev_priv); - - if (INTEL_GEN(dev_priv) >= 9) - DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz, VCO: %d kHz, ref: %d kHz\n", - dev_priv->cdclk_freq, dev_priv->cdclk_pll.vco, - dev_priv->cdclk_pll.ref); - else - DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n", - dev_priv->cdclk_freq); - - /* - * 9:0 CMBUS [sic] CDCLK frequency (cdfreq): - * Programmng [sic] note: bit[9:2] should be programmed to the number - * of cdclk that generates 4MHz reference clock freq which is used to - * generate GMBus clock. This will vary with the cdclk freq. - */ - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) - I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000)); -} - -/* convert from kHz to .1 fixpoint MHz with -1MHz offset */ -static int skl_cdclk_decimal(int cdclk) -{ - return DIV_ROUND_CLOSEST(cdclk - 1000, 500); -} - -static int bxt_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk) -{ - int ratio; - - if (cdclk == dev_priv->cdclk_pll.ref) - return 0; - - switch (cdclk) { - default: - MISSING_CASE(cdclk); - case 144000: - case 288000: - case 384000: - case 576000: - ratio = 60; - break; - case 624000: - ratio = 65; - break; - } - - return dev_priv->cdclk_pll.ref * ratio; -} - -static int glk_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk) -{ - int ratio; - - if (cdclk == dev_priv->cdclk_pll.ref) - return 0; - - switch (cdclk) { - default: - MISSING_CASE(cdclk); - case 79200: - case 158400: - case 316800: - ratio = 33; - break; - } - - return dev_priv->cdclk_pll.ref * ratio; -} - -static void bxt_de_pll_disable(struct drm_i915_private *dev_priv) -{ - I915_WRITE(BXT_DE_PLL_ENABLE, 0); - - /* Timeout 200us */ - if (intel_wait_for_register(dev_priv, - BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 0, - 1)) - DRM_ERROR("timeout waiting for DE PLL unlock\n"); - - dev_priv->cdclk_pll.vco = 0; -} - -static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco) -{ - int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk_pll.ref); - u32 val; - - val = I915_READ(BXT_DE_PLL_CTL); - val &= ~BXT_DE_PLL_RATIO_MASK; - val |= BXT_DE_PLL_RATIO(ratio); - I915_WRITE(BXT_DE_PLL_CTL, val); - - I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE); - - /* Timeout 200us */ - if (intel_wait_for_register(dev_priv, - BXT_DE_PLL_ENABLE, - BXT_DE_PLL_LOCK, - BXT_DE_PLL_LOCK, - 1)) - DRM_ERROR("timeout waiting for DE PLL lock\n"); - - dev_priv->cdclk_pll.vco = vco; -} - -static void bxt_set_cdclk(struct drm_i915_private *dev_priv, int cdclk) -{ - u32 val, divider; - int vco, ret; - - if (IS_GEMINILAKE(dev_priv)) - vco = glk_de_pll_vco(dev_priv, cdclk); - else - vco = bxt_de_pll_vco(dev_priv, cdclk); - - DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco); - - /* cdclk = vco / 2 / div{1,1.5,2,4} */ - switch (DIV_ROUND_CLOSEST(vco, cdclk)) { - case 8: - divider = BXT_CDCLK_CD2X_DIV_SEL_4; - break; - case 4: - divider = BXT_CDCLK_CD2X_DIV_SEL_2; - break; - case 3: - WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n"); - divider = BXT_CDCLK_CD2X_DIV_SEL_1_5; - break; - case 2: - divider = BXT_CDCLK_CD2X_DIV_SEL_1; - break; - default: - WARN_ON(cdclk != dev_priv->cdclk_pll.ref); - WARN_ON(vco != 0); - - divider = BXT_CDCLK_CD2X_DIV_SEL_1; - break; - } - - /* Inform power controller of upcoming frequency change */ - mutex_lock(&dev_priv->rps.hw_lock); - ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, - 0x80000000); - mutex_unlock(&dev_priv->rps.hw_lock); - - if (ret) { - DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n", - ret, cdclk); - return; - } - - if (dev_priv->cdclk_pll.vco != 0 && - dev_priv->cdclk_pll.vco != vco) - bxt_de_pll_disable(dev_priv); - - if (dev_priv->cdclk_pll.vco != vco) - bxt_de_pll_enable(dev_priv, vco); - - val = divider | skl_cdclk_decimal(cdclk); - /* - * FIXME if only the cd2x divider needs changing, it could be done - * without shutting off the pipe (if only one pipe is active). - */ - val |= BXT_CDCLK_CD2X_PIPE_NONE; - /* - * Disable SSA Precharge when CD clock frequency < 500 MHz, - * enable otherwise. - */ - if (cdclk >= 500000) - val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; - I915_WRITE(CDCLK_CTL, val); - - mutex_lock(&dev_priv->rps.hw_lock); - ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, - DIV_ROUND_UP(cdclk, 25000)); - mutex_unlock(&dev_priv->rps.hw_lock); - - if (ret) { - DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n", - ret, cdclk); - return; - } - - intel_update_cdclk(dev_priv); -} - -static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv) -{ - u32 cdctl, expected; - - intel_update_cdclk(dev_priv); - - if (dev_priv->cdclk_pll.vco == 0 || - dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref) - goto sanitize; - - /* DPLL okay; verify the cdclock - * - * Some BIOS versions leave an incorrect decimal frequency value and - * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4, - * so sanitize this register. - */ - cdctl = I915_READ(CDCLK_CTL); - /* - * Let's ignore the pipe field, since BIOS could have configured the - * dividers both synching to an active pipe, or asynchronously - * (PIPE_NONE). - */ - cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE; - - expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) | - skl_cdclk_decimal(dev_priv->cdclk_freq); - /* - * Disable SSA Precharge when CD clock frequency < 500 MHz, - * enable otherwise. - */ - if (dev_priv->cdclk_freq >= 500000) - expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; - - if (cdctl == expected) - /* All well; nothing to sanitize */ - return; - -sanitize: - DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); - - /* force cdclk programming */ - dev_priv->cdclk_freq = 0; - - /* force full PLL disable + enable */ - dev_priv->cdclk_pll.vco = -1; -} - -void bxt_init_cdclk(struct drm_i915_private *dev_priv) -{ - int cdclk; - - bxt_sanitize_cdclk(dev_priv); - - if (dev_priv->cdclk_freq != 0 && dev_priv->cdclk_pll.vco != 0) - return; - - /* - * FIXME: - * - The initial CDCLK needs to be read from VBT. - * Need to make this change after VBT has changes for BXT. - */ - if (IS_GEMINILAKE(dev_priv)) - cdclk = glk_calc_cdclk(0); - else - cdclk = bxt_calc_cdclk(0); - - bxt_set_cdclk(dev_priv, cdclk); -} - -void bxt_uninit_cdclk(struct drm_i915_private *dev_priv) -{ - bxt_set_cdclk(dev_priv, dev_priv->cdclk_pll.ref); -} - -static int skl_calc_cdclk(int max_pixclk, int vco) -{ - if (vco == 8640000) { - if (max_pixclk > 540000) - return 617143; - else if (max_pixclk > 432000) - return 540000; - else if (max_pixclk > 308571) - return 432000; - else - return 308571; - } else { - if (max_pixclk > 540000) - return 675000; - else if (max_pixclk > 450000) - return 540000; - else if (max_pixclk > 337500) - return 450000; - else - return 337500; - } -} - -static void -skl_dpll0_update(struct drm_i915_private *dev_priv) -{ - u32 val; - - dev_priv->cdclk_pll.ref = 24000; - dev_priv->cdclk_pll.vco = 0; - - val = I915_READ(LCPLL1_CTL); - if ((val & LCPLL_PLL_ENABLE) == 0) - return; - - if (WARN_ON((val & LCPLL_PLL_LOCK) == 0)) - return; - - val = I915_READ(DPLL_CTRL1); - - if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | - DPLL_CTRL1_SSC(SKL_DPLL0) | - DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) != - DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) - return; - - switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) { - case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0): - case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0): - case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0): - case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0): - dev_priv->cdclk_pll.vco = 8100000; - break; - case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0): - case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0): - dev_priv->cdclk_pll.vco = 8640000; - break; - default: - MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); - break; - } -} - -void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, int vco) -{ - bool changed = dev_priv->skl_preferred_vco_freq != vco; - - dev_priv->skl_preferred_vco_freq = vco; - - if (changed) - intel_update_max_cdclk(dev_priv); -} - -static void -skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco) -{ - int min_cdclk = skl_calc_cdclk(0, vco); - u32 val; - - WARN_ON(vco != 8100000 && vco != 8640000); - - /* select the minimum CDCLK before enabling DPLL 0 */ - val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk); - I915_WRITE(CDCLK_CTL, val); - POSTING_READ(CDCLK_CTL); - - /* - * We always enable DPLL0 with the lowest link rate possible, but still - * taking into account the VCO required to operate the eDP panel at the - * desired frequency. The usual DP link rates operate with a VCO of - * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640. - * The modeset code is responsible for the selection of the exact link - * rate later on, with the constraint of choosing a frequency that - * works with vco. - */ - val = I915_READ(DPLL_CTRL1); - - val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) | - DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); - val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0); - if (vco == 8640000) - val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, - SKL_DPLL0); - else - val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, - SKL_DPLL0); - - I915_WRITE(DPLL_CTRL1, val); - POSTING_READ(DPLL_CTRL1); - - I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE); - - if (intel_wait_for_register(dev_priv, - LCPLL1_CTL, LCPLL_PLL_LOCK, LCPLL_PLL_LOCK, - 5)) - DRM_ERROR("DPLL0 not locked\n"); - - dev_priv->cdclk_pll.vco = vco; - - /* We'll want to keep using the current vco from now on. */ - skl_set_preferred_cdclk_vco(dev_priv, vco); -} - -static void -skl_dpll0_disable(struct drm_i915_private *dev_priv) -{ - I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE); - if (intel_wait_for_register(dev_priv, - LCPLL1_CTL, LCPLL_PLL_LOCK, 0, - 1)) - DRM_ERROR("Couldn't disable DPLL0\n"); - - dev_priv->cdclk_pll.vco = 0; -} - -static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco) -{ - u32 freq_select, pcu_ack; - int ret; - - WARN_ON((cdclk == 24000) != (vco == 0)); - - DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco); - - mutex_lock(&dev_priv->rps.hw_lock); - ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL, - SKL_CDCLK_PREPARE_FOR_CHANGE, - SKL_CDCLK_READY_FOR_CHANGE, - SKL_CDCLK_READY_FOR_CHANGE, 3); - mutex_unlock(&dev_priv->rps.hw_lock); - if (ret) { - DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n", - ret); - return; - } - - /* set CDCLK_CTL */ - switch (cdclk) { - case 450000: - case 432000: - freq_select = CDCLK_FREQ_450_432; - pcu_ack = 1; - break; - case 540000: - freq_select = CDCLK_FREQ_540; - pcu_ack = 2; - break; - case 308571: - case 337500: - default: - freq_select = CDCLK_FREQ_337_308; - pcu_ack = 0; - break; - case 617143: - case 675000: - freq_select = CDCLK_FREQ_675_617; - pcu_ack = 3; - break; - } - - if (dev_priv->cdclk_pll.vco != 0 && - dev_priv->cdclk_pll.vco != vco) - skl_dpll0_disable(dev_priv); - - if (dev_priv->cdclk_pll.vco != vco) - skl_dpll0_enable(dev_priv, vco); - - I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk)); - POSTING_READ(CDCLK_CTL); - - /* inform PCU of the change */ - mutex_lock(&dev_priv->rps.hw_lock); - sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack); - mutex_unlock(&dev_priv->rps.hw_lock); - - intel_update_cdclk(dev_priv); -} - -static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv); - -void skl_uninit_cdclk(struct drm_i915_private *dev_priv) -{ - skl_set_cdclk(dev_priv, dev_priv->cdclk_pll.ref, 0); -} - -void skl_init_cdclk(struct drm_i915_private *dev_priv) -{ - int cdclk, vco; - - skl_sanitize_cdclk(dev_priv); - - if (dev_priv->cdclk_freq != 0 && dev_priv->cdclk_pll.vco != 0) { - /* - * Use the current vco as our initial - * guess as to what the preferred vco is. - */ - if (dev_priv->skl_preferred_vco_freq == 0) - skl_set_preferred_cdclk_vco(dev_priv, - dev_priv->cdclk_pll.vco); - return; - } - - vco = dev_priv->skl_preferred_vco_freq; - if (vco == 0) - vco = 8100000; - cdclk = skl_calc_cdclk(0, vco); - - skl_set_cdclk(dev_priv, cdclk, vco); -} - -static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv) -{ - uint32_t cdctl, expected; - - /* - * check if the pre-os intialized the display - * There is SWF18 scratchpad register defined which is set by the - * pre-os which can be used by the OS drivers to check the status - */ - if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0) - goto sanitize; - - intel_update_cdclk(dev_priv); - /* Is PLL enabled and locked ? */ - if (dev_priv->cdclk_pll.vco == 0 || - dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref) - goto sanitize; - - /* DPLL okay; verify the cdclock - * - * Noticed in some instances that the freq selection is correct but - * decimal part is programmed wrong from BIOS where pre-os does not - * enable display. Verify the same as well. - */ - cdctl = I915_READ(CDCLK_CTL); - expected = (cdctl & CDCLK_FREQ_SEL_MASK) | - skl_cdclk_decimal(dev_priv->cdclk_freq); - if (cdctl == expected) - /* All well; nothing to sanitize */ - return; - -sanitize: - DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); - - /* force cdclk programming */ - dev_priv->cdclk_freq = 0; - /* force full PLL disable + enable */ - dev_priv->cdclk_pll.vco = -1; -} - -/* Adjust CDclk dividers to allow high res or save power if possible */ -static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) -{ - struct drm_i915_private *dev_priv = to_i915(dev); - u32 val, cmd; - - WARN_ON(dev_priv->display.get_cdclk(dev_priv) != dev_priv->cdclk_freq); - - if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */ - cmd = 2; - else if (cdclk == 266667) - cmd = 1; - else - cmd = 0; - - mutex_lock(&dev_priv->rps.hw_lock); - val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); - val &= ~DSPFREQGUAR_MASK; - val |= (cmd << DSPFREQGUAR_SHIFT); - vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); - if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & - DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), - 50)) { - DRM_ERROR("timed out waiting for CDclk change\n"); - } - mutex_unlock(&dev_priv->rps.hw_lock); - - mutex_lock(&dev_priv->sb_lock); - - if (cdclk == 400000) { - u32 divider; - - divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; - - /* adjust cdclk divider */ - val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); - val &= ~CCK_FREQUENCY_VALUES; - val |= divider; - vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); - - if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) & - CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT), - 50)) - DRM_ERROR("timed out waiting for CDclk change\n"); - } - - /* adjust self-refresh exit latency value */ - val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); - val &= ~0x7f; - - /* - * For high bandwidth configs, we set a higher latency in the bunit - * so that the core display fetch happens in time to avoid underruns. - */ - if (cdclk == 400000) - val |= 4500 / 250; /* 4.5 usec */ - else - val |= 3000 / 250; /* 3.0 usec */ - vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); - - mutex_unlock(&dev_priv->sb_lock); - - intel_update_cdclk(dev_priv); -} - -static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) -{ - struct drm_i915_private *dev_priv = to_i915(dev); - u32 val, cmd; - - WARN_ON(dev_priv->display.get_cdclk(dev_priv) != dev_priv->cdclk_freq); - - switch (cdclk) { - case 333333: - case 320000: - case 266667: - case 200000: - break; - default: - MISSING_CASE(cdclk); - return; - } - - /* - * Specs are full of misinformation, but testing on actual - * hardware has shown that we just need to write the desired - * CCK divider into the Punit register. - */ - cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; - - mutex_lock(&dev_priv->rps.hw_lock); - val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); - val &= ~DSPFREQGUAR_MASK_CHV; - val |= (cmd << DSPFREQGUAR_SHIFT_CHV); - vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); - if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & - DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV), - 50)) { - DRM_ERROR("timed out waiting for CDclk change\n"); - } - mutex_unlock(&dev_priv->rps.hw_lock); - - intel_update_cdclk(dev_priv); -} - -static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, - int max_pixclk) -{ - int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000; - int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90; - - /* - * Really only a few cases to deal with, as only 4 CDclks are supported: - * 200MHz - * 267MHz - * 320/333MHz (depends on HPLL freq) - * 400MHz (VLV only) - * So we check to see whether we're above 90% (VLV) or 95% (CHV) - * of the lower bin and adjust if needed. - * - * We seem to get an unstable or solid color picture at 200MHz. - * Not sure what's wrong. For now use 200MHz only when all pipes - * are off. - */ - if (!IS_CHERRYVIEW(dev_priv) && - max_pixclk > freq_320*limit/100) - return 400000; - else if (max_pixclk > 266667*limit/100) - return freq_320; - else if (max_pixclk > 0) - return 266667; - else - return 200000; -} - -static int glk_calc_cdclk(int max_pixclk) -{ - if (max_pixclk > 2 * 158400) - return 316800; - else if (max_pixclk > 2 * 79200) - return 158400; - else - return 79200; -} - -static int bxt_calc_cdclk(int max_pixclk) -{ - if (max_pixclk > 576000) - return 624000; - else if (max_pixclk > 384000) - return 576000; - else if (max_pixclk > 288000) - return 384000; - else if (max_pixclk > 144000) - return 288000; - else - return 144000; -} - -static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state) -{ - struct drm_device *dev = state->dev; - struct drm_i915_private *dev_priv = to_i915(dev); - int max_pixclk = intel_max_pixel_rate(state); - struct intel_atomic_state *intel_state = - to_intel_atomic_state(state); - - intel_state->cdclk = intel_state->dev_cdclk = - valleyview_calc_cdclk(dev_priv, max_pixclk); - - if (!intel_state->active_crtcs) - intel_state->dev_cdclk = valleyview_calc_cdclk(dev_priv, 0); - - return 0; -} - -static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) -{ - struct drm_i915_private *dev_priv = to_i915(state->dev); - int max_pixclk = intel_max_pixel_rate(state); - struct intel_atomic_state *intel_state = - to_intel_atomic_state(state); - int cdclk; - - if (IS_GEMINILAKE(dev_priv)) - cdclk = glk_calc_cdclk(max_pixclk); - else - cdclk = bxt_calc_cdclk(max_pixclk); - - intel_state->cdclk = intel_state->dev_cdclk = cdclk; - - if (!intel_state->active_crtcs) { - if (IS_GEMINILAKE(dev_priv)) - cdclk = glk_calc_cdclk(0); - else - cdclk = bxt_calc_cdclk(0); - - intel_state->dev_cdclk = cdclk; - } - - return 0; -} - -static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) -{ - unsigned int credits, default_credits; - - if (IS_CHERRYVIEW(dev_priv)) - default_credits = PFI_CREDIT(12); - else - default_credits = PFI_CREDIT(8); - - if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) { - /* CHV suggested value is 31 or 63 */ - if (IS_CHERRYVIEW(dev_priv)) - credits = PFI_CREDIT_63; - else - credits = PFI_CREDIT(15); - } else { - credits = default_credits; - } - - /* - * WA - write default credits before re-programming - * FIXME: should we also set the resend bit here? - */ - I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE | - default_credits); - - I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE | - credits | PFI_CREDIT_RESEND); - - /* - * FIXME is this guaranteed to clear - * immediately or should we poll for it? - */ - WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND); -} - -static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state) -{ - struct drm_device *dev = old_state->dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_atomic_state *old_intel_state = - to_intel_atomic_state(old_state); - unsigned req_cdclk = old_intel_state->dev_cdclk; - - /* - * FIXME: We can end up here with all power domains off, yet - * with a CDCLK frequency other than the minimum. To account - * for this take the PIPE-A power domain, which covers the HW - * blocks needed for the following programming. This can be - * removed once it's guaranteed that we get here either with - * the minimum CDCLK set, or the required power domains - * enabled. - */ - intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A); - - if (IS_CHERRYVIEW(dev_priv)) - cherryview_set_cdclk(dev, req_cdclk); - else - valleyview_set_cdclk(dev, req_cdclk); - - vlv_program_pfi_credits(dev_priv); - - intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A); -} - static void valleyview_crtc_enable(struct intel_crtc_state *pipe_config, struct drm_atomic_state *old_state) { @@ -7247,448 +6305,6 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, return 0; } -static int skylake_get_cdclk(struct drm_i915_private *dev_priv) -{ - u32 cdctl; - - skl_dpll0_update(dev_priv); - - if (dev_priv->cdclk_pll.vco == 0) - return dev_priv->cdclk_pll.ref; - - cdctl = I915_READ(CDCLK_CTL); - - if (dev_priv->cdclk_pll.vco == 8640000) { - switch (cdctl & CDCLK_FREQ_SEL_MASK) { - case CDCLK_FREQ_450_432: - return 432000; - case CDCLK_FREQ_337_308: - return 308571; - case CDCLK_FREQ_540: - return 540000; - case CDCLK_FREQ_675_617: - return 617143; - default: - MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); - } - } else { - switch (cdctl & CDCLK_FREQ_SEL_MASK) { - case CDCLK_FREQ_450_432: - return 450000; - case CDCLK_FREQ_337_308: - return 337500; - case CDCLK_FREQ_540: - return 540000; - case CDCLK_FREQ_675_617: - return 675000; - default: - MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); - } - } - - return dev_priv->cdclk_pll.ref; -} - -static void bxt_de_pll_update(struct drm_i915_private *dev_priv) -{ - u32 val; - - dev_priv->cdclk_pll.ref = 19200; - dev_priv->cdclk_pll.vco = 0; - - val = I915_READ(BXT_DE_PLL_ENABLE); - if ((val & BXT_DE_PLL_PLL_ENABLE) == 0) - return; - - if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0)) - return; - - val = I915_READ(BXT_DE_PLL_CTL); - dev_priv->cdclk_pll.vco = (val & BXT_DE_PLL_RATIO_MASK) * - dev_priv->cdclk_pll.ref; -} - -static int broxton_get_cdclk(struct drm_i915_private *dev_priv) -{ - u32 divider; - int div, vco; - - bxt_de_pll_update(dev_priv); - - vco = dev_priv->cdclk_pll.vco; - if (vco == 0) - return dev_priv->cdclk_pll.ref; - - divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK; - - switch (divider) { - case BXT_CDCLK_CD2X_DIV_SEL_1: - div = 2; - break; - case BXT_CDCLK_CD2X_DIV_SEL_1_5: - WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n"); - div = 3; - break; - case BXT_CDCLK_CD2X_DIV_SEL_2: - div = 4; - break; - case BXT_CDCLK_CD2X_DIV_SEL_4: - div = 8; - break; - default: - MISSING_CASE(divider); - return dev_priv->cdclk_pll.ref; - } - - return DIV_ROUND_CLOSEST(vco, div); -} - -static int broadwell_get_cdclk(struct drm_i915_private *dev_priv) -{ - uint32_t lcpll = I915_READ(LCPLL_CTL); - uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; - - if (lcpll & LCPLL_CD_SOURCE_FCLK) - return 800000; - else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) - return 450000; - else if (freq == LCPLL_CLK_FREQ_450) - return 450000; - else if (freq == LCPLL_CLK_FREQ_54O_BDW) - return 540000; - else if (freq == LCPLL_CLK_FREQ_337_5_BDW) - return 337500; - else - return 675000; -} - -static int haswell_get_cdclk(struct drm_i915_private *dev_priv) -{ - uint32_t lcpll = I915_READ(LCPLL_CTL); - uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; - - if (lcpll & LCPLL_CD_SOURCE_FCLK) - return 800000; - else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) - return 450000; - else if (freq == LCPLL_CLK_FREQ_450) - return 450000; - else if (IS_HSW_ULT(dev_priv)) - return 337500; - else - return 540000; -} - -static int valleyview_get_cdclk(struct drm_i915_private *dev_priv) -{ - return vlv_get_cck_clock_hpll(dev_priv, "cdclk", - CCK_DISPLAY_CLOCK_CONTROL); -} - -static int fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv) -{ - return 450000; -} - -static int fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv) -{ - return 400000; -} - -static int i945gm_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - u16 gcfgc = 0; - - pci_read_config_word(pdev, GCFGC, &gcfgc); - - if (gcfgc & GC_LOW_FREQUENCY_ENABLE) - return 133333; - else { - switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { - case GC_DISPLAY_CLOCK_333_320_MHZ: - return 320000; - default: - case GC_DISPLAY_CLOCK_190_200_MHZ: - return 200000; - } - } -} - -static int fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv) -{ - return 333333; -} - -static int fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv) -{ - return 200000; -} - -static int pnv_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - u16 gcfgc = 0; - - pci_read_config_word(pdev, GCFGC, &gcfgc); - - switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { - case GC_DISPLAY_CLOCK_267_MHZ_PNV: - return 266667; - case GC_DISPLAY_CLOCK_333_MHZ_PNV: - return 333333; - case GC_DISPLAY_CLOCK_444_MHZ_PNV: - return 444444; - case GC_DISPLAY_CLOCK_200_MHZ_PNV: - return 200000; - default: - DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc); - case GC_DISPLAY_CLOCK_133_MHZ_PNV: - return 133333; - case GC_DISPLAY_CLOCK_167_MHZ_PNV: - return 166667; - } -} - -static int i915gm_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - u16 gcfgc = 0; - - pci_read_config_word(pdev, GCFGC, &gcfgc); - - if (gcfgc & GC_LOW_FREQUENCY_ENABLE) - return 133333; - else { - switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { - case GC_DISPLAY_CLOCK_333_320_MHZ: - return 333333; - default: - case GC_DISPLAY_CLOCK_190_200_MHZ: - return 190000; - } - } -} - -static int fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv) -{ - return 266667; -} - -static int i85x_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - u16 hpllcc = 0; - - /* - * 852GM/852GMV only supports 133 MHz and the HPLLCC - * encoding is different :( - * FIXME is this the right way to detect 852GM/852GMV? - */ - if (pdev->revision == 0x1) - return 133333; - - pci_bus_read_config_word(pdev->bus, - PCI_DEVFN(0, 3), HPLLCC, &hpllcc); - - /* Assume that the hardware is in the high speed state. This - * should be the default. - */ - switch (hpllcc & GC_CLOCK_CONTROL_MASK) { - case GC_CLOCK_133_200: - case GC_CLOCK_133_200_2: - case GC_CLOCK_100_200: - return 200000; - case GC_CLOCK_166_250: - return 250000; - case GC_CLOCK_100_133: - return 133333; - case GC_CLOCK_133_266: - case GC_CLOCK_133_266_2: - case GC_CLOCK_166_266: - return 266667; - } - - /* Shouldn't happen */ - return 0; -} - -static int fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv) -{ - return 133333; -} - -static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv) -{ - static const unsigned int blb_vco[8] = { - [0] = 3200000, - [1] = 4000000, - [2] = 5333333, - [3] = 4800000, - [4] = 6400000, - }; - static const unsigned int pnv_vco[8] = { - [0] = 3200000, - [1] = 4000000, - [2] = 5333333, - [3] = 4800000, - [4] = 2666667, - }; - static const unsigned int cl_vco[8] = { - [0] = 3200000, - [1] = 4000000, - [2] = 5333333, - [3] = 6400000, - [4] = 3333333, - [5] = 3566667, - [6] = 4266667, - }; - static const unsigned int elk_vco[8] = { - [0] = 3200000, - [1] = 4000000, - [2] = 5333333, - [3] = 4800000, - }; - static const unsigned int ctg_vco[8] = { - [0] = 3200000, - [1] = 4000000, - [2] = 5333333, - [3] = 6400000, - [4] = 2666667, - [5] = 4266667, - }; - const unsigned int *vco_table; - unsigned int vco; - uint8_t tmp = 0; - - /* FIXME other chipsets? */ - if (IS_GM45(dev_priv)) - vco_table = ctg_vco; - else if (IS_G4X(dev_priv)) - vco_table = elk_vco; - else if (IS_I965GM(dev_priv)) - vco_table = cl_vco; - else if (IS_PINEVIEW(dev_priv)) - vco_table = pnv_vco; - else if (IS_G33(dev_priv)) - vco_table = blb_vco; - else - return 0; - - tmp = I915_READ(IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO); - - vco = vco_table[tmp & 0x7]; - if (vco == 0) - DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp); - else - DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco); - - return vco; -} - -static int gm45_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - unsigned int cdclk_sel, vco = intel_hpll_vco(dev_priv); - uint16_t tmp = 0; - - pci_read_config_word(pdev, GCFGC, &tmp); - - cdclk_sel = (tmp >> 12) & 0x1; - - switch (vco) { - case 2666667: - case 4000000: - case 5333333: - return cdclk_sel ? 333333 : 222222; - case 3200000: - return cdclk_sel ? 320000 : 228571; - default: - DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp); - return 222222; - } -} - -static int i965gm_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - static const uint8_t div_3200[] = { 16, 10, 8 }; - static const uint8_t div_4000[] = { 20, 12, 10 }; - static const uint8_t div_5333[] = { 24, 16, 14 }; - const uint8_t *div_table; - unsigned int cdclk_sel, vco = intel_hpll_vco(dev_priv); - uint16_t tmp = 0; - - pci_read_config_word(pdev, GCFGC, &tmp); - - cdclk_sel = ((tmp >> 8) & 0x1f) - 1; - - if (cdclk_sel >= ARRAY_SIZE(div_3200)) - goto fail; - - switch (vco) { - case 3200000: - div_table = div_3200; - break; - case 4000000: - div_table = div_4000; - break; - case 5333333: - div_table = div_5333; - break; - default: - goto fail; - } - - return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]); - -fail: - DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp); - return 200000; -} - -static int g33_get_cdclk(struct drm_i915_private *dev_priv) -{ - struct pci_dev *pdev = dev_priv->drm.pdev; - static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 }; - static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 }; - static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 }; - static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 }; - const uint8_t *div_table; - unsigned int cdclk_sel, vco = intel_hpll_vco(dev_priv); - uint16_t tmp = 0; - - pci_read_config_word(pdev, GCFGC, &tmp); - - cdclk_sel = (tmp >> 4) & 0x7; - - if (cdclk_sel >= ARRAY_SIZE(div_3200)) - goto fail; - - switch (vco) { - case 3200000: - div_table = div_3200; - break; - case 4000000: - div_table = div_4000; - break; - case 4800000: - div_table = div_4800; - break; - case 5333333: - div_table = div_5333; - break; - default: - goto fail; - } - - return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]); - -fail: - DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp); - return 190476; -} - static void intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den) { @@ -10250,245 +8866,6 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) } } -static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) -{ - struct drm_device *dev = old_state->dev; - struct intel_atomic_state *old_intel_state = - to_intel_atomic_state(old_state); - unsigned int req_cdclk = old_intel_state->dev_cdclk; - - bxt_set_cdclk(to_i915(dev), req_cdclk); -} - -static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, - int pixel_rate) -{ - struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); - - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) - pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); - - /* BSpec says "Do not use DisplayPort with CDCLK less than - * 432 MHz, audio enabled, port width x4, and link rate - * HBR2 (5.4 GHz), or else there may be audio corruption or - * screen corruption." - */ - if (intel_crtc_has_dp_encoder(crtc_state) && - crtc_state->has_audio && - crtc_state->port_clock >= 540000 && - crtc_state->lane_count == 4) - pixel_rate = max(432000, pixel_rate); - - return pixel_rate; -} - -/* compute the max rate for new configuration */ -static int intel_max_pixel_rate(struct drm_atomic_state *state) -{ - struct intel_atomic_state *intel_state = to_intel_atomic_state(state); - struct drm_i915_private *dev_priv = to_i915(state->dev); - struct drm_crtc *crtc; - struct drm_crtc_state *cstate; - struct intel_crtc_state *crtc_state; - unsigned max_pixel_rate = 0, i; - enum pipe pipe; - - memcpy(intel_state->min_pixclk, dev_priv->min_pixclk, - sizeof(intel_state->min_pixclk)); - - for_each_crtc_in_state(state, crtc, cstate, i) { - int pixel_rate; - - crtc_state = to_intel_crtc_state(cstate); - if (!crtc_state->base.enable) { - intel_state->min_pixclk[i] = 0; - continue; - } - - pixel_rate = crtc_state->pixel_rate; - - if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) - pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, - pixel_rate); - - intel_state->min_pixclk[i] = pixel_rate; - } - - for_each_pipe(dev_priv, pipe) - max_pixel_rate = max(intel_state->min_pixclk[pipe], max_pixel_rate); - - return max_pixel_rate; -} - -static void broadwell_set_cdclk(struct drm_device *dev, int cdclk) -{ - struct drm_i915_private *dev_priv = to_i915(dev); - uint32_t val, data; - int ret; - - if (WARN((I915_READ(LCPLL_CTL) & - (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK | - LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE | - LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW | - LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK, - "trying to change cdclk frequency with cdclk not enabled\n")) - return; - - mutex_lock(&dev_priv->rps.hw_lock); - ret = sandybridge_pcode_write(dev_priv, - BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0); - mutex_unlock(&dev_priv->rps.hw_lock); - if (ret) { - DRM_ERROR("failed to inform pcode about cdclk change\n"); - return; - } - - val = I915_READ(LCPLL_CTL); - val |= LCPLL_CD_SOURCE_FCLK; - I915_WRITE(LCPLL_CTL, val); - - if (wait_for_us(I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE, 1)) - DRM_ERROR("Switching to FCLK failed\n"); - - val = I915_READ(LCPLL_CTL); - val &= ~LCPLL_CLK_FREQ_MASK; - - switch (cdclk) { - case 450000: - val |= LCPLL_CLK_FREQ_450; - data = 0; - break; - case 540000: - val |= LCPLL_CLK_FREQ_54O_BDW; - data = 1; - break; - case 337500: - val |= LCPLL_CLK_FREQ_337_5_BDW; - data = 2; - break; - case 675000: - val |= LCPLL_CLK_FREQ_675_BDW; - data = 3; - break; - default: - WARN(1, "invalid cdclk frequency\n"); - return; - } - - I915_WRITE(LCPLL_CTL, val); - - val = I915_READ(LCPLL_CTL); - val &= ~LCPLL_CD_SOURCE_FCLK; - I915_WRITE(LCPLL_CTL, val); - - if (wait_for_us((I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) - DRM_ERROR("Switching back to LCPLL failed\n"); - - mutex_lock(&dev_priv->rps.hw_lock); - sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data); - mutex_unlock(&dev_priv->rps.hw_lock); - - I915_WRITE(CDCLK_FREQ, DIV_ROUND_CLOSEST(cdclk, 1000) - 1); - - intel_update_cdclk(dev_priv); - - WARN(cdclk != dev_priv->cdclk_freq, - "cdclk requested %d kHz but got %d kHz\n", - cdclk, dev_priv->cdclk_freq); -} - -static int broadwell_calc_cdclk(int max_pixclk) -{ - if (max_pixclk > 540000) - return 675000; - else if (max_pixclk > 450000) - return 540000; - else if (max_pixclk > 337500) - return 450000; - else - return 337500; -} - -static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state) -{ - struct drm_i915_private *dev_priv = to_i915(state->dev); - struct intel_atomic_state *intel_state = to_intel_atomic_state(state); - int max_pixclk = intel_max_pixel_rate(state); - int cdclk; - - /* - * FIXME should also account for plane ratio - * once 64bpp pixel formats are supported. - */ - cdclk = broadwell_calc_cdclk(max_pixclk); - - if (cdclk > dev_priv->max_cdclk_freq) { - DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", - cdclk, dev_priv->max_cdclk_freq); - return -EINVAL; - } - - intel_state->cdclk = intel_state->dev_cdclk = cdclk; - if (!intel_state->active_crtcs) - intel_state->dev_cdclk = broadwell_calc_cdclk(0); - - return 0; -} - -static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state) -{ - struct drm_device *dev = old_state->dev; - struct intel_atomic_state *old_intel_state = - to_intel_atomic_state(old_state); - unsigned req_cdclk = old_intel_state->dev_cdclk; - - broadwell_set_cdclk(dev, req_cdclk); -} - -static int skl_modeset_calc_cdclk(struct drm_atomic_state *state) -{ - struct intel_atomic_state *intel_state = to_intel_atomic_state(state); - struct drm_i915_private *dev_priv = to_i915(state->dev); - const int max_pixclk = intel_max_pixel_rate(state); - int vco = intel_state->cdclk_pll_vco; - int cdclk; - - /* - * FIXME should also account for plane ratio - * once 64bpp pixel formats are supported. - */ - cdclk = skl_calc_cdclk(max_pixclk, vco); - - /* - * FIXME move the cdclk caclulation to - * compute_config() so we can fail gracegully. - */ - if (cdclk > dev_priv->max_cdclk_freq) { - DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n", - cdclk, dev_priv->max_cdclk_freq); - cdclk = dev_priv->max_cdclk_freq; - } - - intel_state->cdclk = intel_state->dev_cdclk = cdclk; - if (!intel_state->active_crtcs) - intel_state->dev_cdclk = skl_calc_cdclk(0, vco); - - return 0; -} - -static void skl_modeset_commit_cdclk(struct drm_atomic_state *old_state) -{ - struct drm_i915_private *dev_priv = to_i915(old_state->dev); - struct intel_atomic_state *intel_state = to_intel_atomic_state(old_state); - unsigned int req_cdclk = intel_state->dev_cdclk; - unsigned int req_vco = intel_state->cdclk_pll_vco; - - skl_set_cdclk(dev_priv, req_cdclk, req_vco); -} - static int haswell_crtc_compute_clock(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state) { @@ -16170,6 +14547,8 @@ static const struct drm_mode_config_funcs intel_mode_funcs = { */ void intel_init_display_hooks(struct drm_i915_private *dev_priv) { + intel_init_cdclk_hooks(dev_priv); + if (INTEL_INFO(dev_priv)->gen >= 9) { dev_priv->display.get_pipe_config = haswell_get_pipe_config; dev_priv->display.get_initial_plane_config = @@ -16238,52 +14617,6 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv) dev_priv->display.crtc_disable = i9xx_crtc_disable; } - /* Returns the core display clock speed */ - if (IS_GEN9_BC(dev_priv)) - dev_priv->display.get_cdclk = skylake_get_cdclk; - else if (IS_GEN9_LP(dev_priv)) - dev_priv->display.get_cdclk = broxton_get_cdclk; - else if (IS_BROADWELL(dev_priv)) - dev_priv->display.get_cdclk = broadwell_get_cdclk; - else if (IS_HASWELL(dev_priv)) - dev_priv->display.get_cdclk = haswell_get_cdclk; - else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) - dev_priv->display.get_cdclk = valleyview_get_cdclk; - else if (IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv)) - dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; - else if (IS_GEN5(dev_priv)) - dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk; - else if (IS_GM45(dev_priv)) - dev_priv->display.get_cdclk = gm45_get_cdclk; - else if (IS_G4X(dev_priv)) - dev_priv->display.get_cdclk = g33_get_cdclk; - else if (IS_I965GM(dev_priv)) - dev_priv->display.get_cdclk = i965gm_get_cdclk; - else if (IS_I965G(dev_priv)) - dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; - else if (IS_PINEVIEW(dev_priv)) - dev_priv->display.get_cdclk = pnv_get_cdclk; - else if (IS_G33(dev_priv)) - dev_priv->display.get_cdclk = g33_get_cdclk; - else if (IS_I945GM(dev_priv)) - dev_priv->display.get_cdclk = i945gm_get_cdclk; - else if (IS_I945G(dev_priv)) - dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; - else if (IS_I915GM(dev_priv)) - dev_priv->display.get_cdclk = i915gm_get_cdclk; - else if (IS_I915G(dev_priv)) - dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk; - else if (IS_I865G(dev_priv)) - dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk; - else if (IS_I85X(dev_priv)) - dev_priv->display.get_cdclk = i85x_get_cdclk; - else if (IS_I845G(dev_priv)) - dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk; - else { /* 830 */ - WARN(!IS_I830(dev_priv), "Unknown platform. Assuming 133 MHz CDCLK\n"); - dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk; - } - if (IS_GEN5(dev_priv)) { dev_priv->display.fdi_link_train = ironlake_fdi_link_train; } else if (IS_GEN6(dev_priv)) { @@ -16295,28 +14628,6 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv) dev_priv->display.fdi_link_train = hsw_fdi_link_train; } - if (IS_BROADWELL(dev_priv)) { - dev_priv->display.modeset_commit_cdclk = - broadwell_modeset_commit_cdclk; - dev_priv->display.modeset_calc_cdclk = - broadwell_modeset_calc_cdclk; - } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { - dev_priv->display.modeset_commit_cdclk = - valleyview_modeset_commit_cdclk; - dev_priv->display.modeset_calc_cdclk = - valleyview_modeset_calc_cdclk; - } else if (IS_GEN9_LP(dev_priv)) { - dev_priv->display.modeset_commit_cdclk = - bxt_modeset_commit_cdclk; - dev_priv->display.modeset_calc_cdclk = - bxt_modeset_calc_cdclk; - } else if (IS_GEN9_BC(dev_priv)) { - dev_priv->display.modeset_commit_cdclk = - skl_modeset_commit_cdclk; - dev_priv->display.modeset_calc_cdclk = - skl_modeset_calc_cdclk; - } - if (dev_priv->info.gen >= 9) dev_priv->display.update_crtcs = skl_update_crtcs; else diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index e1dbd9aa5701..4bdb1f3cb0b5 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1246,12 +1246,19 @@ void intel_audio_codec_disable(struct intel_encoder *encoder); void i915_audio_component_init(struct drm_i915_private *dev_priv); void i915_audio_component_cleanup(struct drm_i915_private *dev_priv); +/* intel_cdclk.c */ +void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv); +void intel_update_max_cdclk(struct drm_i915_private *dev_priv); +void intel_update_cdclk(struct drm_i915_private *dev_priv); +void intel_update_rawclk(struct drm_i915_private *dev_priv); + /* intel_display.c */ enum transcoder intel_crtc_pch_transcoder(struct intel_crtc *crtc); -void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, int vco); void intel_update_rawclk(struct drm_i915_private *dev_priv); int vlv_get_cck_clock(struct drm_i915_private *dev_priv, const char *name, u32 reg, int ref_freq); +int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, + const char *name, u32 reg); void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv); void lpt_disable_iclkip(struct drm_i915_private *dev_priv); extern const struct drm_plane_funcs intel_plane_funcs; -- 2.10.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
