[1.] One line summary of the problem: Screen flickering under highest resolution (3840x2160) with external monitor connected to DisplayPort. This is with an X1 Carbon (3rd generation) and flickering only happens on external monitor and only on highest resolution. [2.] Full description of the problem/report: No real additional information from the one line summary. Sometimes screen goes completely blank for a second or so. [3.] Keywords (i.e., modules, networking, kernel): Please do not put anything here. This is how Kernel.org uses an undocumented keyword system, which has nothing to do with Ubuntu Tags system. [4.] Kernel version (from /proc/version): Linux version 4.10.0-994-generic (kernel@gomeisa) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #201702052101 SMP Mon Feb 6 02:02:51 UTC 2017 [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) Attached is dmesg.txt with drm.debug=14 on.
[ 0.000000] Linux version 4.10.0-994-generic (kernel@gomeisa) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #201702052101 SMP Mon Feb 6 02:02:51 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.10.0-994-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash drm.debug=14 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca2defff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca2df000-0x00000000ca4defff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ca4df000-0x00000000ccbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbfe000 ESRT=0xca70b000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20BSCT01WW/20BSCT01WW, BIOS N14ET34W (1.12 ) 02/04/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FF0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000000] 4 base 00CCE00000 mask 7FFFE00000 uncachable [ 0.000000] 5 base 00F0000000 mask 7FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xcce00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000ca70b000 to 0x00000000ca70b060. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff92b2c0085000] 85000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x6d627000, 0x6d627fff] PGTABLE [ 0.000000] BRK [0x6d628000, 0x6d628fff] PGTABLE [ 0.000000] BRK [0x6d629000, 0x6d629fff] PGTABLE [ 0.000000] BRK [0x6d62a000, 0x6d62afff] PGTABLE [ 0.000000] BRK [0x6d62b000, 0x6d62bfff] PGTABLE [ 0.000000] BRK [0x6d62c000, 0x6d62cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x331f2000-0x358f0fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000CCDFE1C0 0000EC (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000CCDE2000 0112AD (v02 LENOVO TP-N14 00001120 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000CCD68000 000040 [ 0.000000] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-N14 00001120 PTEC 00000001) [ 0.000000] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE1000 000290 (v01 LENOVO PcieAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDF000 000691 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDE000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDD000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDB000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDA000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000CCDD9000 00006E (v05 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCDD8000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000CCDD7000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000CCDD6000 0006B0 (v02 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000CCDD5000 000042 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000CCCB1000 000055 (v03 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000CCDD4000 000046 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000CCDD3000 000064 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000CCDD2000 0002F6 (v01 LENOVO TP-N14 00001120 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22dfd3000-0x22dffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ca2defff] [ 0.000000] node 0: [mem 0x00000000ccdff000-0x00000000ccdfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff] [ 0.000000] On node 0 totalpages: 2065002 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 41 pages reserved [ 0.000000] DMA zone: 3978 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12876 pages used for memmap [ 0.000000] DMA32 zone: 824032 pages, LIFO batch:31 [ 0.000000] Normal zone: 19328 pages used for memmap [ 0.000000] Normal zone: 1236992 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000ce000000-0x00000000cfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xca2df000-0xca4defff] [ 0.000000] PM: Registered nosave memory: [mem 0xca4df000-0xccbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff92b4edc00000 s107800 r8192 d31464 u262144 [ 0.000000] pcpu-alloc: s107800 r8192 d31464 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2032693 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.10.0-994-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7887052K/8260008K available (8936K kernel code, 1660K rwdata, 3852K rodata, 2228K init, 2364K bss, 372956K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:524544 nr_irqs:760 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.840 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.68 BogoMIPS (lpj=10375360) [ 0.000023] pid_max: default: 32768 minimum: 301 [ 0.000031] ACPI: Core revision 20160930 [ 0.014563] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.047826] Security Framework initialized [ 0.047826] Yama: becoming mindful. [ 0.047833] AppArmor: AppArmor initialized [ 0.048223] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.049582] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.050176] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.050183] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.050390] CPU: Physical Processor ID: 0 [ 0.050390] CPU: Processor Core ID: 0 [ 0.050394] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.050395] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.050398] mce: CPU supports 7 MCE banks [ 0.050406] CPU0: Thermal monitoring enabled (TM1) [ 0.050416] process: using mwait in idle threads [ 0.050418] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.050418] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.051033] Freeing SMP alternatives memory: 32K [ 0.055073] ftrace: allocating 33921 entries in 133 pages [ 0.069667] smpboot: Max logical packages: 4 [ 0.069793] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.070416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110103] TSC deadline timer enabled [ 0.110105] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.110145] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.110163] ... version: 3 [ 0.110163] ... bit width: 48 [ 0.110164] ... generic registers: 4 [ 0.110164] ... value mask: 0000ffffffffffff [ 0.110165] ... max period: 00007fffffffffff [ 0.110165] ... fixed-purpose events: 3 [ 0.110165] ... event mask: 000000070000000f [ 0.110922] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.110934] smp: Bringing up secondary CPUs ... [ 0.110988] x86: Booting SMP configuration: [ 0.110988] .... node #0, CPUs: #1 #2 #3 [ 0.350209] smp: Brought up 1 node, 4 CPUs [ 0.350211] smpboot: Total of 4 processors activated (20754.41 BogoMIPS) [ 0.354194] devtmpfs: initialized [ 0.354243] x86/mm: Memory block size: 128MB [ 0.356154] evm: security.selinux [ 0.356154] evm: security.SMACK64 [ 0.356155] evm: security.SMACK64EXEC [ 0.356155] evm: security.SMACK64TRANSMUTE [ 0.356155] evm: security.SMACK64MMAP [ 0.356156] evm: security.ima [ 0.356156] evm: security.capability [ 0.356214] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes) [ 0.356277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.356311] pinctrl core: initialized pinctrl subsystem [ 0.356397] RTC time: 23:10:41, date: 02/06/17 [ 0.356469] NET: Registered protocol family 16 [ 0.370226] cpuidle: using governor ladder [ 0.386246] cpuidle: using governor menu [ 0.386254] Error parsing PCC subspaces from PCCT [ 0.386292] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.386293] ACPI: bus type PCI registered [ 0.386294] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.386453] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.386479] PCI: not using MMCONFIG [ 0.386480] PCI: Using configuration type 1 for base access [ 0.402375] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.402376] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.402558] ACPI: Added _OSI(Module Device) [ 0.402558] ACPI: Added _OSI(Processor Device) [ 0.402559] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.402559] ACPI: Added _OSI(Processor Aggregator Device) [ 0.402563] ACPI : EC: EC started [ 0.403374] ACPI: \: Used as first EC [ 0.403375] ACPI: \: GPE=0x24, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.403376] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.406229] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.551419] ACPI: Dynamic OEM Table Load: [ 0.551428] ACPI: SSDT 0xFFFF92B4E3D82800 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.551726] ACPI: Dynamic OEM Table Load: [ 0.551733] ACPI: SSDT 0xFFFF92B4E3D87800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.552066] ACPI: Dynamic OEM Table Load: [ 0.552072] ACPI: SSDT 0xFFFF92B4E3D89200 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.552822] ACPI : EC: EC stopped [ 0.552823] ACPI : EC: EC started [ 0.552948] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC [ 0.552949] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x24, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.552950] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions [ 0.552951] ACPI: Interpreter enabled [ 0.552979] ACPI: (supports S0 S3 S4 S5) [ 0.552980] ACPI: Using IOAPIC for interrupt routing [ 0.553004] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.553372] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.553379] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.646494] ACPI: Power Resource [PUBS] (on) [ 0.710608] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.710870] ACPI: Power Resource [NVP3] (on) [ 0.710893] ACPI: Power Resource [NVP2] (on) [ 0.815614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.815664] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.815713] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.815761] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.815808] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.815855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.815903] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.815950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.816017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.816021] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.816104] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.816140] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.816141] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.816142] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.816143] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.816286] PCI host bridge to bus 0000:00 [ 0.816288] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.816289] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.816289] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.816290] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.816291] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.816292] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.816298] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.816370] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.816378] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.816383] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.816387] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.816451] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.816458] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit] [ 0.816542] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.816556] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit] [ 0.816605] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.816631] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.816661] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.816678] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit] [ 0.816737] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.816793] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.816805] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff] [ 0.816811] pci 0000:00:19.0: reg 0x14: [mem 0xf123d000-0xf123dfff] [ 0.816817] pci 0000:00:19.0: reg 0x18: [io 0x3060-0x307f] [ 0.816865] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.816892] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.816920] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.816933] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit] [ 0.816983] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.817034] pci 0000:00:1c.0: [8086:9c92] type 01 class 0x060400 [ 0.817098] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.817187] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400 [ 0.817252] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.817310] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.817342] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400 [ 0.817407] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.817493] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.817508] pci 0000:00:1d.0: reg 0x10: [mem 0xf123c000-0xf123c3ff] [ 0.817583] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.817612] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.817645] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.817792] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.817803] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit] [ 0.817820] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.817888] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.817913] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit] [ 0.818084] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.818309] pci 0000:04:00.0: [8086:095b] type 00 class 0x028000 [ 0.818392] pci 0000:04:00.0: reg 0x10: [mem 0xf1100000-0xf1101fff 64bit] [ 0.818720] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.830818] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.830822] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff] [ 0.830942] pci 0000:0a:00.0: [144d:a801] type 00 class 0x010601 [ 0.830993] pci 0000:0a:00.0: reg 0x24: [mem 0xf1000000-0xf1001fff] [ 0.842721] pci 0000:00:1c.5: PCI bridge to [bus 0a] [ 0.842725] pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf10fffff] [ 0.890978] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.891045] ACPI : EC: event unblocked [ 0.891051] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x24, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.891052] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.891196] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.891198] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.891200] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.891201] vgaarb: loaded [ 0.891326] SCSI subsystem initialized [ 0.891359] libata version 3.00 loaded. [ 0.891373] ACPI: bus type USB registered [ 0.891385] usbcore: registered new interface driver usbfs [ 0.891390] usbcore: registered new interface driver hub [ 0.891404] usbcore: registered new device driver usb [ 0.891462] Registered efivars operations [ 0.908844] PCI: Using ACPI for IRQ routing [ 0.910010] PCI: pci_cache_line_size set to 64 bytes [ 0.910431] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.910432] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff] [ 0.910433] e820: reserve RAM buffer [mem 0xca2df000-0xcbffffff] [ 0.910434] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff] [ 0.910434] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff] [ 0.910504] NetLabel: Initializing [ 0.910505] NetLabel: domain hash size = 128 [ 0.910505] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.910517] NetLabel: unlabeled traffic allowed by default [ 0.910598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.910602] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.912620] clocksource: Switched to clocksource hpet [ 0.918865] VFS: Disk quotas dquot_6.6.0 [ 0.918880] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.918937] AppArmor: AppArmor Filesystem Enabled [ 0.918976] pnp: PnP ACPI init [ 0.919327] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.919329] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.919330] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.919331] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.919332] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.919333] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.919334] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.919335] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.919337] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.919338] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.919339] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.919340] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.919341] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.919342] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.919343] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.919344] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.919345] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved [ 0.919348] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.919417] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.919435] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.919437] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.919438] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.919439] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.919440] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.919441] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.919442] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.919443] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.919443] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.919444] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.919445] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.919446] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.919448] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.919449] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.919450] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.919451] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.919452] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.919453] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.919455] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.919510] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.919529] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.919545] pnp 00:04: Plug and Play ACPI device, IDs LEN0048 PNP0f13 (active) [ 0.919800] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.919946] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved [ 0.919947] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved [ 0.919949] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.919975] pnp: PnP ACPI: found 7 devices [ 0.925817] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.925830] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.925831] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.925833] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.925849] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.925850] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.925851] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.925852] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.925853] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.925854] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.925857] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff] [ 0.925860] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.925862] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.925864] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.925867] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.925871] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd02fffff] [ 0.925874] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.925878] pci 0000:00:1c.1: PCI bridge to [bus 04] [ 0.925882] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff] [ 0.925888] pci 0000:00:1c.5: PCI bridge to [bus 0a] [ 0.925892] pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf10fffff] [ 0.925899] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.925900] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.925901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.925902] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window] [ 0.925903] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.925904] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.925904] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd02fffff] [ 0.925905] pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.925906] pci_bus 0000:04: resource 1 [mem 0xf1100000-0xf11fffff] [ 0.925907] pci_bus 0000:0a: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.925983] NET: Registered protocol family 2 [ 0.926134] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.926231] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.926332] TCP: Hash tables configured (established 65536 bind 65536) [ 0.926357] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.926378] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.926422] NET: Registered protocol family 1 [ 0.926432] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.926920] PCI: CLS 64 bytes, default 64 [ 0.926954] Trying to unpack rootfs image as initramfs... [ 1.494481] Freeing initrd memory: 39932K [ 1.494483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.494485] software IO TLB [mem 0xba0b0000-0xbe0b0000] (64MB) mapped at [ffff92b37a0b0000-ffff92b37e0affff] [ 1.494692] Scanning for low memory corruption every 60 seconds [ 1.494949] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.494972] audit: initializing netlink subsys (disabled) [ 1.495005] audit: type=2000 audit(1486422641.456:1): initialized [ 1.495346] Initialise system trusted keyrings [ 1.495407] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.496535] zbud: loaded [ 1.496875] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.497029] fuse init (API version 7.26) [ 1.497124] Allocating IMA blacklist keyring. [ 1.497969] Key type asymmetric registered [ 1.497970] Asymmetric key parser 'x509' registered [ 1.498002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.498024] io scheduler noop registered [ 1.498025] io scheduler deadline registered [ 1.498030] io scheduler cfq registered (default) [ 1.498420] intel_idle: MWAIT substates: 0x11142120 [ 1.498421] intel_idle: v0.4.1 model 0x3D [ 1.498598] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.498730] ACPI: AC Adapter [AC] (on-line) [ 1.498874] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.498975] ACPI: Lid Switch [LID] [ 1.499003] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.499005] ACPI: Sleep Button [SLPB] [ 1.499036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.499037] ACPI: Power Button [PWRF] [ 1.499819] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.500113] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.500113] ACPI: Thermal Zone [THM0] (50 C) [ 1.500130] GHES: HEST is not enabled! [ 1.500199] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.501367] Linux agpgart interface v0.103 [ 1.507236] ACPI: Battery Slot [BAT0] (battery present) [ 1.516700] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.580748] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 1.580753] tpm tpm0: TPM is disabled/deactivated (0x6) [ 1.583728] brd: module loaded [ 1.584691] loop: module loaded [ 1.584825] libphy: Fixed MDIO Bus: probed [ 1.584826] tun: Universal TUN/TAP device driver, 1.6 [ 1.584826] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 1.584851] PPP generic driver version 2.4.2 [ 1.584879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.584882] ehci-pci: EHCI PCI platform driver [ 1.584988] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.584991] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.585002] ehci-pci 0000:00:1d.0: debug port 2 [ 1.588889] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.588898] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123c000 [ 1.604672] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.604701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.604702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.604703] usb usb1: Product: EHCI Host Controller [ 1.604704] usb usb1: Manufacturer: Linux 4.10.0-994-generic ehci_hcd [ 1.604705] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.604875] hub 1-0:1.0: USB hub found [ 1.604879] hub 1-0:1.0: 3 ports detected [ 1.605089] ehci-platform: EHCI generic platform driver [ 1.605098] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.605101] ohci-pci: OHCI PCI platform driver [ 1.605107] ohci-platform: OHCI generic platform driver [ 1.605111] uhci_hcd: USB Universal Host Controller Interface driver [ 1.605201] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.605204] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.606268] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.606271] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.606336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.606337] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.606338] usb usb2: Product: xHCI Host Controller [ 1.606338] usb usb2: Manufacturer: Linux 4.10.0-994-generic xhci-hcd [ 1.606339] usb usb2: SerialNumber: 0000:00:14.0 [ 1.606503] hub 2-0:1.0: USB hub found [ 1.606514] hub 2-0:1.0: 11 ports detected [ 1.607299] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.607301] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.607324] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.607325] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.607326] usb usb3: Product: xHCI Host Controller [ 1.607327] usb usb3: Manufacturer: Linux 4.10.0-994-generic xhci-hcd [ 1.607328] usb usb3: SerialNumber: 0000:00:14.0 [ 1.607490] hub 3-0:1.0: USB hub found [ 1.607498] hub 3-0:1.0: 4 ports detected [ 1.608176] usb: port power management may be unreliable [ 1.608357] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.610147] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.610150] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.610345] mousedev: PS/2 mouse device common for all mice [ 1.610558] rtc_cmos 00:02: RTC can wake from S4 [ 1.610709] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.610733] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.610738] i2c /dev entries driver [ 1.610777] device-mapper: uevent: version 1.0.3 [ 1.610861] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 1.610866] intel_pstate: Intel P-state driver initializing [ 1.610994] ledtrig-cpu: registered to indicate activity on CPUs [ 1.610996] EFI Variables Facility v0.08 2004-May-17 [ 1.611924] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.628282] NET: Registered protocol family 10 [ 1.630851] Segment Routing with IPv6 [ 1.630860] NET: Registered protocol family 17 [ 1.630865] Key type dns_resolver registered [ 1.631043] microcode: sig=0x306d4, pf=0x40, revision=0x22 [ 1.631077] microcode: Microcode Update Driver: v2.2. [ 1.631151] registered taskstats version 1 [ 1.631157] Loading compiled-in X.509 certificates [ 1.632824] Loaded X.509 cert 'Build time autogenerated kernel key: d3782191449e925553b381165a56aee4d7b407e3' [ 1.632834] zswap: loaded using pool lzo/zbud [ 1.641163] Key type big_key registered [ 1.641165] Key type trusted registered [ 1.642331] Key type encrypted registered [ 1.642332] AppArmor: AppArmor sha1 policy hashing enabled [ 1.660702] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 1.660706] ima: No TPM chip found, activating TPM-bypass! (rc=6) [ 1.660717] evm: HMAC attrs: 0x1 [ 1.661202] Magic number: 5:482:200 [ 1.661304] rtc_cmos 00:02: setting system clock to 2017-02-06 23:10:42 UTC (1486422642) [ 1.661348] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.661348] EDD information not available. [ 1.661377] PM: Hibernation image not present or could not be loaded. [ 1.662657] Freeing unused kernel memory: 2228K [ 1.662658] Write protecting the kernel read-only data: 14336k [ 1.662924] Freeing unused kernel memory: 1288K [ 1.663341] Freeing unused kernel memory: 244K [ 1.668063] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.676977] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677056] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677068] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677084] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.677401] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.677435] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.678329] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.678362] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.678370] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.678629] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.695031] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.700683] wmi: Mapper loaded [ 1.701854] pps_core: LinuxPPS API ver. 1 registered [ 1.701855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 1.703093] PTP clock support registered [ 1.703773] ahci 0000:0a:00.0: version 3.0 [ 1.707747] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.707748] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.707892] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.714322] ahci 0000:0a:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.714325] ahci 0000:0a:00.0: flags: 64bit ncq led clo only pio ccc [ 1.721047] AVX2 version of gcm_enc/dec engaged. [ 1.721048] AES CTR mode by8 optimization enabled [ 1.721345] scsi host0: ahci [ 1.721462] ata1: SATA max UDMA/133 abar m8192@0xf1000000 port 0xf1000100 irq 41 [ 1.919439] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.932741] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 1.932750] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.997969] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:79:50:47 [ 1.997970] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.998012] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 1.998206] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 1.998229] [drm:i915_driver_load [i915]] Found LynxPoint LP PCH [ 1.998248] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 1.998347] [drm:intel_device_info_dump [i915]] i915 device info: platform=BROADWELL gen=8 pciid=0x1616 rev=0x09 [ 1.998372] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no [ 1.998395] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no [ 1.998418] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no [ 1.998440] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes [ 1.998462] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes [ 1.998483] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no [ 1.998484] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.998501] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes [ 1.998523] [drm:intel_device_info_dump [i915]] i915 device info: has_decoupled_mmio: no [ 1.998544] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes [ 1.998559] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes [ 1.998572] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes [ 1.998587] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes [ 1.998613] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: yes [ 1.998626] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes [ 1.998638] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no [ 1.998651] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no [ 1.998663] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes [ 1.998675] [drm:intel_device_info_dump [i915]] i915 device info: has_hw_contexts: yes [ 1.998687] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no [ 1.998698] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes [ 1.998710] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes [ 1.998722] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no [ 1.998734] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no [ 1.998746] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no [ 1.998758] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes [ 1.998774] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes [ 1.998791] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no [ 1.998808] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes [ 1.998825] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes [ 1.998842] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no [ 1.998858] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no [ 1.998875] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no [ 1.998892] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no [ 1.998909] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no [ 2.000960] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001 [ 2.000979] [drm:intel_device_info_runtime_init [i915]] slice total: 1 [ 2.000996] [drm:intel_device_info_runtime_init [i915]] subslice total: 3 [ 2.001013] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007 [ 2.001030] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3 [ 2.001046] [drm:intel_device_info_runtime_init [i915]] EU total: 24 [ 2.001062] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8 [ 2.001078] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n [ 2.001096] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n [ 2.001178] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n [ 2.001196] [drm:i915_driver_load [i915]] ppgtt mode: 3 [ 2.001213] [drm:i915_driver_load [i915]] use GPU sempahores? no [ 2.001233] [drm] Memory usable by graphics device = 4096M [ 2.001256] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 2.001277] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 32M [ 2.001278] [drm] Replacing VGA console driver [ 2.001313] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K [ 2.001344] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xccd65018 [ 2.001374] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 2.001398] [drm:intel_opregion_setup [i915]] SWSCI supported [ 2.007119] [drm:intel_opregion_setup [i915]] SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705) [ 2.007145] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383 [ 2.007170] [drm:intel_opregion_setup [i915]] ASLE supported [ 2.007197] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 2.007224] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.007271] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.007272] [drm] Driver supports precise vblank timestamp query. [ 2.007301] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 2.007329] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 189 [ 2.007356] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.007383] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 0 [ 2.007411] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-22) [ 2.007437] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 2.007464] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 2.007492] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 2.007504] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 0 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x8 0xa [ 2.007531] [drm:intel_bios_init [i915]] VBT initial LVDS value 20033c [ 2.007559] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255, controller 0 [ 2.007587] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 2.007596] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.007624] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 2.007652] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 2.007679] [drm:intel_bios_init [i915]] VBT has unknown eDP link rate value 2 [ 2.007707] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 2.007734] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 2.007760] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.007787] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 6 [ 2.007814] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.007840] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 6 [ 2.007878] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 2.007910] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz [ 2.007934] [drm:intel_power_well_enable [i915]] enabling always-on [ 2.007958] [drm:intel_power_well_enable [i915]] enabling display [ 2.008470] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 2.008503] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec) [ 2.008532] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 50 (25.0 usec) [ 2.008560] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 90 (45.0 usec) [ 2.008585] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 130 (65.0 usec) [ 2.008604] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec) [ 2.008621] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec) [ 2.008638] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 50 (25.0 usec) [ 2.008655] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 90 (45.0 usec) [ 2.008671] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 130 (65.0 usec) [ 2.008688] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec) [ 2.008716] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec) [ 2.008732] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 50 (25.0 usec) [ 2.008755] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 90 (45.0 usec) [ 2.008769] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 130 (65.0 usec) [ 2.008783] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec) [ 2.008806] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 2.008842] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz [ 2.008864] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz [ 2.008885] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 540000 kHz [ 2.008887] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.009213] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 2.009239] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT) [ 2.009268] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 2.009288] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 50 t9 2000 t10 500 t11_t12 5000 [ 2.009307] [drm:intel_dp_init_panel_power_sequencer.part.15 [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.009325] [drm:intel_dp_init_panel_power_sequencer.part.15 [i915]] backlight on delay 5, off delay 200 [ 2.009348] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 2.009370] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 2.009393] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 2.009839] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 0a c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 2.010254] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 2.010584] [drm:intel_dp_init_connector [i915]] Detected EDP PSR Panel. [ 2.010923] [drm:intel_dp_init_connector [i915]] EDP DPCD : 02 b7 f6 [ 2.012934] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.013967] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.015267] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.016295] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.017580] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.018611] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.019909] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.020936] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.022231] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.023255] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.024554] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.025582] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.026890] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.027913] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.029213] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.030240] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer [ 2.031291] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 2.031318] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 2.031350] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 852/852 [ 2.031381] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B [ 2.031408] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT) [ 2.031434] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 2.031461] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 2.031484] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C [ 2.031506] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT) [ 2.031529] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 2.031551] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) [ 2.031646] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:31:pipe A] hw state readout: enabled [ 2.031671] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:38:pipe B] hw state readout: disabled [ 2.031696] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:45:pipe C] hw state readout: disabled [ 2.031720] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 2.031743] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 2.031766] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 2.031788] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 2.031809] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 2.031831] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 2.031855] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:46:DDI A] hw state readout: enabled, pipe A [ 2.031877] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:DDI B] hw state readout: disabled, pipe A [ 2.031897] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:56:DP-MST A] hw state readout: disabled, pipe A [ 2.031918] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:57:DP-MST B] hw state readout: disabled, pipe B [ 2.031938] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DP-MST C] hw state readout: disabled, pipe C [ 2.031993] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DDI C] hw state readout: disabled, pipe A [ 2.032013] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:63:DP-MST A] hw state readout: disabled, pipe A [ 2.032033] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:64:DP-MST B] hw state readout: disabled, pipe B [ 2.032052] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:DP-MST C] hw state readout: disabled, pipe C [ 2.032073] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:47:eDP-1] hw state readout: enabled [ 2.032099] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:55:DP-1] hw state readout: disabled [ 2.032116] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:HDMI-A-1] hw state readout: disabled [ 2.032132] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:62:DP-2] hw state readout: disabled [ 2.032148] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:HDMI-A-2] hw state readout: disabled [ 2.032174] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][setup_hw_state] [ 2.032193] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 2.032211] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 4166237, gmch_n: 8388608, link_m: 462915, link_n: 524288, tu: 64 [ 2.032229] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.032246] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.032254] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 238393 2560 2608 2640 2720 1440 1442 1445 1457 0x40 0x9 [ 2.032272] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.032279] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 238393 2560 2608 2640 2720 1440 1442 1445 1457 0x40 0x9 [ 2.032298] [drm:intel_dump_pipe_config [i915]] crtc timings: 238393 2560 2608 2640 2720 1440 1442 1445 1457, type: 0x40 flags: 0x9 [ 2.032315] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 640x480 [ 2.032332] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x0a0005a0, enabled [ 2.032348] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.032368] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x90280202 spll: 0x0 [ 2.032385] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.032402] [drm:intel_dump_pipe_config [i915]] [PLANE:25:primary A] disabled, scaler_id = 0 [ 2.032419] [drm:intel_dump_pipe_config [i915]] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 2.032435] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] disabled, scaler_id = 0 [ 2.032452] [drm:intel_dump_pipe_config [i915]] [CRTC:38:pipe B][setup_hw_state] [ 2.032468] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 2.032483] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.032499] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.032506] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.032523] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.032530] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.032548] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.032564] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0 [ 2.032581] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.032597] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.032616] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.032633] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.032650] [drm:intel_dump_pipe_config [i915]] [PLANE:32:primary B] disabled, scaler_id = 0 [ 2.032666] [drm:intel_dump_pipe_config [i915]] [PLANE:34:sprite B] disabled, scaler_id = 0 [ 2.032682] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor B] disabled, scaler_id = 0 [ 2.032713] [drm:intel_dump_pipe_config [i915]] [CRTC:45:pipe C][setup_hw_state] [ 2.032743] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 2.032758] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.032774] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.032781] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.032797] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.032805] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.032822] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.032838] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0 [ 2.032858] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.032879] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.032901] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.032921] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.032942] [drm:intel_dump_pipe_config [i915]] [PLANE:39:primary C] disabled, scaler_id = 0 [ 2.032963] [drm:intel_dump_pipe_config [i915]] [PLANE:41:sprite C] disabled, scaler_id = 0 [ 2.032984] [drm:intel_dump_pipe_config [i915]] [PLANE:43:cursor C] disabled, scaler_id = 0 [ 2.033005] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling [ 2.033027] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling [ 2.033047] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling [ 2.033069] [drm:intel_power_well_disable [i915]] disabling display [ 2.033087] [drm:hsw_set_power_well.constprop.13 [i915]] Requesting to disable the power well [ 2.033111] [drm:ironlake_get_initial_plane_config [i915]] pipe A with fb: size=640x480@32, offset=0, pitch 2560, size 0x12c000 [ 2.033131] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=12c000 [ 2.033151] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 2.033214] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, fffff000] [ 2.033241] [drm:i915_gem_context_init [i915]] LR context support initialized [ 2.033268] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0xffffe000 [ 2.033917] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring [ 2.033940] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring [ 2.033962] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring [ 2.033982] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring [ 2.034003] [drm:intel_guc_setup [i915]] GuC fw status: path (null), fetch NONE, load NONE [ 2.034033] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz [ 2.034068] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 2.034089] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 2.034109] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 2.034143] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 2.034181] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1] [ 2.034206] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 2.034231] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.034254] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.034277] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.034489] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 2.034521] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 2.034662] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 [ 2.034695] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 2.034857] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2 [ 2.034972] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 [ 2.035015] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:47:eDP-1] status updated from unknown to connected [ 2.035040] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 2.035047] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:55:DP-1] status updated from unknown to disconnected [ 2.035070] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 2.035149] [drm:intel_opregion_register [i915]] 5 outputs detected [ 2.035478] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.035748] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.035819] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 [ 2.036725] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.036747] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.037274] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.038253] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.038255] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.038327] ata1.00: ACPI cmd ef/05:01:51:00:00:a0 (SET FEATURES) succeeded [ 2.038396] ata1.00: ACPI cmd ef/05:02:4c:00:00:a0 (SET FEATURES) succeeded [ 2.038649] ata1.00: ATA-9: SAMSUNG MZHPV512HDGL-000L1, BXW25L0Q, max UDMA/133 [ 2.038650] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.038793] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.038804] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.038921] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.038922] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.038957] ata1.00: ACPI cmd ef/05:01:51:00:00:a0 (SET FEATURES) succeeded [ 2.038991] ata1.00: ACPI cmd ef/05:02:4c:00:00:a0 (SET FEATURES) succeeded [ 2.039164] ata1.00: configured for UDMA/133 [ 2.039301] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZHPV512 5L0Q PQ: 0 ANSI: 5 [ 2.040728] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.040752] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.042829] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.042836] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.042841] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] status updated from unknown to disconnected [ 2.042869] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-2] [ 2.042875] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:62:DP-2] status updated from unknown to disconnected [ 2.042900] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-2] [ 2.044757] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.044783] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.046876] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.046890] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.048766] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.048791] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.050884] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.050893] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.050898] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] status updated from unknown to disconnected [ 2.050926] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.050932] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] [ 2.050967] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1] [ 2.051002] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 2.051037] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.051064] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.051088] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.051500] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 2.051848] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 2.051853] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes : [ 2.051861] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 2.051865] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] [ 2.051891] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 2.051897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] disconnected [ 2.051900] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] [ 2.051927] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 2.053994] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.054018] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.056093] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.056102] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.058196] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.058222] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.060318] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.060326] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.060331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] disconnected [ 2.060335] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] [ 2.060363] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-2] [ 2.060369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] disconnected [ 2.060373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] [ 2.060399] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-2] [ 2.062493] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.062519] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.064614] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.064628] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.066725] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.066752] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.068810] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.068817] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.068822] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] disconnected [ 2.068827] [drm:drm_setup_crtcs [drm_kms_helper]] connector 47 enabled? yes [ 2.068830] [drm:drm_setup_crtcs [drm_kms_helper]] connector 55 enabled? no [ 2.068833] [drm:drm_setup_crtcs [drm_kms_helper]] connector 59 enabled? no [ 2.068837] [drm:drm_setup_crtcs [drm_kms_helper]] connector 62 enabled? no [ 2.068840] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? no [ 2.068867] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 [ 2.068894] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 [ 2.068920] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:31:pipe A]: 2560x1440 [ 2.068945] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping [ 2.068971] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping [ 2.068996] [drm:intel_fb_initial_config [i915]] connector DP-2 not enabled, skipping [ 2.069022] [drm:intel_fb_initial_config [i915]] connector HDMI-A-2 not enabled, skipping [ 2.069026] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 2560x1440 set on crtc 31 (0,0) [ 2.069053] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 2.070036] [drm:intelfb_create [i915]] allocated 2560x1440 fb: 0x00011000 [ 2.070149] fbcon: inteldrmfb (fb0) is primary device [ 2.070231] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:47:eDP-1] checking for sink bpp constrains [ 2.070252] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to default limit of 24 [ 2.070274] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 237800KHz [ 2.070293] [drm:intel_dp_compute_config [i915]] clamping bpp for eDP panel to BIOS-provided 18 [ 2.070312] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 18 [ 2.070329] [drm:intel_dp_compute_config [i915]] DP link bw required 535050 available 1080000 [ 2.070350] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 2.070371] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][modeset] [ 2.070391] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 2.070410] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 4155856, gmch_n: 8388608, link_m: 461761, link_n: 524288, tu: 64 [ 2.070431] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.070452] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.070461] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 2.070483] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.070491] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 2.070513] [drm:intel_dump_pipe_config [i915]] crtc timings: 237800 2560 2608 2640 2720 1440 1442 1445 1457, type: 0x48 flags: 0x9 [ 2.070535] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 2560x1440 [ 2.070557] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.070578] [drm:intel_dump_pipe_config [i915]] ips: 1, double wide: 0 [ 2.070600] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x90280202 spll: 0x0 [ 2.070621] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.070643] [drm:intel_dump_pipe_config [i915]] [PLANE:25:primary A] disabled, scaler_id = 0 [ 2.070664] [drm:intel_dump_pipe_config [i915]] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 2.070686] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] disabled, scaler_id = 0 [ 2.070709] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 [ 2.070734] [drm:intel_reference_shared_dpll [i915]] using LCPLL 1350 for pipe A [ 2.072815] [drm:intel_edp_backlight_off.part.25 [i915]] [ 2.074284] usb 2-3: New USB device found, idVendor=2109, idProduct=2812 [ 2.074285] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.074286] usb 2-3: Product: OneLink Pro Dock [ 2.074287] usb 2-3: Manufacturer: LENOVO [ 2.074820] hub 2-3:1.0: USB hub found [ 2.074938] hub 2-3:1.0: 4 ports detected [ 2.076847] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.076982] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 2.077026] sd 0:0:0:0: [sda] Write Protect is off [ 2.077027] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.077131] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.078198] sda: sda1 sda2 sda3 [ 2.078443] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.081128] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 2.081129] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.081393] hub 1-1:1.0: USB hub found [ 2.081470] hub 1-1:1.0: 8 ports detected [ 2.192886] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd [ 2.244938] random: fast init done [ 2.280786] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 2.280816] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling [ 2.280851] [drm:intel_disable_pipe [i915]] disabling pipe A [ 2.288953] [drm:edp_panel_off [i915]] Turn eDP port A panel power off [ 2.288986] [drm:edp_panel_off [i915]] Wait for panel power off time [ 2.289017] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 2.340859] [drm:wait_panel_status [i915]] Wait complete [ 2.340892] [drm:intel_disable_shared_dpll [i915]] disable WRPLL 1 (active 1, on? 1) for crtc 31 [ 2.340919] [drm:intel_disable_shared_dpll [i915]] disabling WRPLL 1 [ 2.340953] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz [ 2.340979] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:DDI A] [ 2.341004] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DDI B] [ 2.341029] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST A] [ 2.341052] [drm:intel_atomic_commit_tail [i915]] [ENCODER:57:DP-MST B] [ 2.341075] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DP-MST C] [ 2.341097] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DDI C] [ 2.341120] [drm:intel_atomic_commit_tail [i915]] [ENCODER:63:DP-MST A] [ 2.341142] [drm:intel_atomic_commit_tail [i915]] [ENCODER:64:DP-MST B] [ 2.341166] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DP-MST C] [ 2.341194] [drm:verify_single_dpll_state.isra.112 [i915]] WRPLL 1 [ 2.341225] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 [ 2.341254] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 2.341283] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 [ 2.341314] [drm:verify_single_dpll_state.isra.112 [i915]] WRPLL 2 [ 2.341348] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 2.341370] [drm:verify_single_dpll_state.isra.112 [i915]] SPLL [ 2.341392] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 810 [ 2.341413] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 1350 [ 2.341433] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 2700 [ 2.341458] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 1350 (active 1, on? 0) for crtc 31 [ 2.341481] [drm:intel_enable_shared_dpll [i915]] enabling LCPLL 1350 [ 2.341512] [drm:edp_panel_on [i915]] Turn eDP port A panel power on [ 2.341537] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 2.445120] usb 3-3: New USB device found, idVendor=2109, idProduct=0812 [ 2.445121] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.445122] usb 3-3: Product: OneLink Pro Dock [ 2.445123] usb 3-3: Manufacturer: LENOVO [ 2.488302] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 2.496861] tsc: Refined TSC clocksource calibration: 2593.990 MHz [ 2.496867] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640ebfed9, max_idle_ns: 440795320785 ns [ 2.520214] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 2.560864] usb 2-6: new full-speed USB device number 3 using xhci_hcd [ 2.582865] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3072, fw id: 1795685 [ 2.582871] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.622754] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.647352] hub 3-3:1.0: USB hub found [ 2.647462] hub 3-3:1.0: 4 ports detected [ 2.702289] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 2.702290] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.702291] usb 2-6: SerialNumber: edb048c90745 [ 2.792874] usb 2-3.1: new high-speed USB device number 4 using xhci_hcd [ 2.908034] usb 2-3.1: New USB device found, idVendor=2109, idProduct=2812 [ 2.908036] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.908037] usb 2-3.1: Product: OneLink Pro Dock [ 2.908037] usb 2-3.1: Manufacturer: LENOVO [ 2.908580] hub 2-3.1:1.0: USB hub found [ 2.908933] hub 2-3.1:1.0: 4 ports detected [ 2.912849] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.912879] [drm:wait_panel_status [i915]] Wait complete [ 2.912907] [drm:edp_panel_on [i915]] Wait for panel power on [ 2.912937] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control abcd0003 [ 3.016996] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 [ 3.017023] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 3.017048] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 [ 3.017084] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 3.024884] usb 2-7: new full-speed USB device number 5 using xhci_hcd [ 3.114469] [drm:wait_panel_status [i915]] Wait complete [ 3.114516] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 3.114547] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 3.115640] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 3.115658] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 3.115676] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 3.115693] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 3.116338] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 3.116357] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 3.117300] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 3.117488] [drm:intel_enable_pipe [i915]] enabling pipe A [ 3.117671] [drm:intel_edp_backlight_on.part.24 [i915]] [ 3.117691] [drm:intel_panel_enable_backlight [i915]] pipe A [ 3.117716] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 852 [ 3.128886] [drm:intel_psr_enable [i915]] PSR disable by flag [ 3.128914] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS [ 3.130974] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 3.131013] [drm:intel_fbc_enable [i915]] reserved 7372800 bytes of contiguous stolen space for FBC, threshold: 2 [ 3.131039] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 3.134453] [drm:verify_connector_state.isra.82 [i915]] [CONNECTOR:47:eDP-1] [ 3.134483] [drm:intel_atomic_commit_tail [i915]] [CRTC:31:pipe A] [ 3.134515] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 1350 [ 3.134526] Console: switching to colour frame buffer device 320x90 [ 3.156934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.166396] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a [ 3.166397] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.239665] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] [ 3.239687] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1] [ 3.239704] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 3.239722] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 3.239739] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 3.239757] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 3.240166] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 3.240508] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 3.240512] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes : [ 3.240519] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 3.244709] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] [ 3.244729] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 3.244736] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] disconnected [ 3.244743] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] [ 3.244757] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 3.246877] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 3.246894] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 3.248819] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 3.248831] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 3.249472] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.250904] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 3.250921] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 3.252837] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 3.252845] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 3.252850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] disconnected [ 3.252864] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] [ 3.252882] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-2] [ 3.252889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] disconnected [ 3.252894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] [ 3.252910] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-2] [ 3.254987] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.255005] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.256822] usb 2-3.2: new high-speed USB device number 6 using xhci_hcd [ 3.256858] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.256870] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 3.258948] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.258966] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.260865] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.260873] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 3.260877] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] disconnected [ 3.260914] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 3.369030] usb 2-3.2: New USB device found, idVendor=1a40, idProduct=0101 [ 3.369031] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.369032] usb 2-3.2: Product: USB 2.0 Hub [ 3.369815] hub 2-3.2:1.0: USB hub found [ 3.369830] hub 2-3.2:1.0: 4 ports detected [ 3.443894] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 3.448865] usb 3-3.1: new SuperSpeed USB device number 3 using xhci_hcd [ 3.500356] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 3.500376] [drm:drm_mode_setcrtc [drm]] [CRTC:31:pipe A] [ 3.500383] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:47:eDP-1] [ 3.520358] [drm:drm_mode_setcrtc [drm]] [CRTC:31:pipe A] [ 3.520367] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:47:eDP-1] [ 3.520965] clocksource: Switched to clocksource tsc [ 3.701138] usb 3-3.1: New USB device found, idVendor=2109, idProduct=0812 [ 3.701139] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.701140] usb 3-3.1: Product: OneLink Pro Dock [ 3.701141] usb 3-3.1: Manufacturer: LENOVO [ 3.702493] hub 3-3.1:1.0: USB hub found [ 3.702634] hub 3-3.1:1.0: 4 ports detected [ 3.796878] usb 2-3.1.1: new high-speed USB device number 7 using xhci_hcd [ 3.872962] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on [ 3.915504] usb 2-3.1.1: New USB device found, idVendor=18d1, idProduct=4ee1 [ 3.915506] usb 2-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.915507] usb 2-3.1.1: Product: Nexus 5X [ 3.915508] usb 2-3.1.1: Manufacturer: LGE [ 3.915509] usb 2-3.1.1: SerialNumber: 00c4e51f8131b54f [ 4.032938] usb 2-8: new high-speed USB device number 8 using xhci_hcd [ 4.213191] usb 2-8: New USB device found, idVendor=04f2, idProduct=b45d [ 4.213192] usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.213203] usb 2-8: Product: Integrated Camera [ 4.213204] usb 2-8: Manufacturer: Chicony Electronics Co.,Ltd. [ 4.213204] usb 2-8: SerialNumber: 0x0001 [ 4.264951] usb 2-3.1.2: new high-speed USB device number 9 using xhci_hcd [ 4.378886] usb 2-3.1.2: New USB device found, idVendor=05e3, idProduct=0608 [ 4.378887] usb 2-3.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.378888] usb 2-3.1.2: Product: USB2.0 Hub [ 4.380092] hub 2-3.1.2:1.0: USB hub found [ 4.380418] hub 2-3.1.2:1.0: 4 ports detected [ 4.457217] usb 3-3.1.3: new SuperSpeed USB device number 4 using xhci_hcd [ 4.482163] usb 3-3.1.3: New USB device found, idVendor=17ef, idProduct=304f [ 4.482164] usb 3-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4.482165] usb 3-3.1.3: Product: ThinkPad Dock Giga [ 4.482166] usb 3-3.1.3: Manufacturer: Lenovo [ 4.482167] usb 3-3.1.3: SerialNumber: 000001000000 [ 4.568972] usb 2-3.1.4: new full-speed USB device number 10 using xhci_hcd [ 4.686874] usb 2-3.1.4: config 1 interface 1 altsetting 1 has 2 endpoint descriptors, different from the interface descriptor's value: 1 [ 4.689493] usb 2-3.1.4: New USB device found, idVendor=17ef, idProduct=304e [ 4.689494] usb 2-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.689495] usb 2-3.1.4: Product: ThinkPad OneLink Pro Dock Audio [ 4.689496] usb 2-3.1.4: Manufacturer: C-Media Electronics Inc. [ 4.693322] hidraw: raw HID events driver (C) Jiri Kosina [ 4.695373] usbcore: registered new interface driver usbhid [ 4.695374] usbhid: USB HID core driver [ 4.697021] input: C-Media Electronics Inc. ThinkPad OneLink Pro Dock Audio as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.4/2-3.1.4:1.3/0003:17EF:304E.0001/input/input8 [ 4.697079] hid-generic 0003:17EF:304E.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. ThinkPad OneLink Pro Dock Audio] on usb-0000:00:14.0-3.1.4/input3 [ 4.764935] usb 2-3.1.2.1: new low-speed USB device number 11 using xhci_hcd [ 4.870214] usb 2-3.1.2.1: New USB device found, idVendor=046d, idProduct=c069 [ 4.870215] usb 2-3.1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.870216] usb 2-3.1.2.1: Product: USB Laser Mouse [ 4.870217] usb 2-3.1.2.1: Manufacturer: Logitech [ 4.875948] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2.1/2-3.1.2.1:1.0/0003:046D:C069.0002/input/input9 [ 4.876080] hid-generic 0003:046D:C069.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-3.1.2.1/input0 [ 4.957005] usb 2-3.1.2.2: new low-speed USB device number 12 using xhci_hcd [ 5.062819] usb 2-3.1.2.2: New USB device found, idVendor=0c45, idProduct=0133 [ 5.062821] usb 2-3.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.062821] usb 2-3.1.2.2: Product: USB Keyboard [ 5.062822] usb 2-3.1.2.2: Manufacturer: SONiX [ 5.066272] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2.2/2-3.1.2.2:1.0/0003:0C45:0133.0003/input/input10 [ 5.125204] hid-generic 0003:0C45:0133.0003: input,hidraw2: USB HID v1.00 Keyboard [SONiX USB Keyboard] on usb-0000:00:14.0-3.1.2.2/input0 [ 5.128430] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2.2/2-3.1.2.2:1.1/0003:0C45:0133.0004/input/input11 [ 5.185213] hid-generic 0003:0C45:0133.0004: input,hidraw3: USB HID v1.00 Device [SONiX USB Keyboard] on usb-0000:00:14.0-3.1.2.2/input1 [ 5.265008] usb 2-3.1.2.4: new low-speed USB device number 13 using xhci_hcd [ 5.369855] usb 2-3.1.2.4: New USB device found, idVendor=0835, idProduct=1411 [ 5.369856] usb 2-3.1.2.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 5.369857] usb 2-3.1.2.4: Product: USB Mouse [ 5.369858] usb 2-3.1.2.4: Manufacturer: DP KVM [ 5.375091] input: DP KVM USB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2.4/2-3.1.2.4:1.0/0003:0835:1411.0005/input/input12 [ 5.433211] hid-generic 0003:0835:1411.0005: input,hidraw4: USB HID v1.11 Keyboard [DP KVM USB Mouse] on usb-0000:00:14.0-3.1.2.4/input0 [ 5.438680] input: DP KVM USB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2.4/2-3.1.2.4:1.1/0003:0835:1411.0006/input/input13 [ 5.497294] hid-generic 0003:0835:1411.0006: input,hiddev0,hidraw5: USB HID v1.11 Mouse [DP KVM USB Mouse] on usb-0000:00:14.0-3.1.2.4/input1 [ 6.401102] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 6.401129] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 9.695857] NET: Registered protocol family 38 [ 15.189581] random: crng init done [ 15.206442] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 15.287649] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 15.287751] systemd[1]: Detected architecture x86-64. [ 15.287870] systemd[1]: Set hostname to <morningside>. [ 15.332210] systemd[1]: Listening on Journal Socket (/dev/log). [ 15.332382] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 15.332410] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 15.332433] systemd[1]: Listening on udev Control Socket. [ 15.332458] systemd[1]: Listening on LVM2 poll daemon socket. [ 15.332469] systemd[1]: Listening on fsck to fsckd communication Socket. [ 15.332492] systemd[1]: Listening on Journal Socket. [ 15.347635] lp: driver loaded but no devices found [ 15.356469] ppdev: user-space parallel port driver [ 15.414319] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 15.422597] systemd-journald[437]: Received request to flush runtime journal from PID 1 [ 15.511141] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=852/852 [ 15.511163] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 852 [ 15.523092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.537364] Bluetooth: Core ver 2.22 [ 15.537376] NET: Registered protocol family 31 [ 15.537377] Bluetooth: HCI device and connection manager initialized [ 15.537379] Bluetooth: HCI socket layer initialized [ 15.537381] Bluetooth: L2CAP socket layer initialized [ 15.537386] Bluetooth: SCO socket layer initialized [ 15.549120] usbcore: registered new interface driver btusb [ 15.554157] Intel(R) Wireless WiFi driver for Linux [ 15.554158] Copyright(c) 2003- 2015 Intel Corporation [ 15.558139] usbcore: registered new interface driver r8152 [ 15.559913] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2 [ 15.559930] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2 [ 15.560039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2 [ 15.560051] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2 [ 15.562135] usbcore: registered new interface driver cdc_ether [ 15.565002] Non-volatile memory driver v1.3 [ 15.565127] iwlwifi 0000:04:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm [ 15.566305] Bluetooth: hci0: read Intel version: 370810011003110e23 [ 15.566307] Bluetooth: hci0: Intel device is already patched. patch num: 23 [ 15.569287] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 15.569288] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 15.569289] thinkpad_acpi: ThinkPad BIOS N14ET34W (1.12 ), EC unknown [ 15.569290] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 3rd, model 20BSCT01WW [ 15.570552] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 15.571070] thinkpad_acpi: radio switch found; radios are enabled [ 15.571089] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 15.571089] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 15.572604] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 15.578423] media: Linux media interface: v0.10 [ 15.579204] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14 [ 15.594587] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 15.594991] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 15.597300] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 15.597666] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 15.599886] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 15.601942] usbcore: registered new interface driver snd-usb-audio [ 15.602007] Linux video capture interface: v2.00 [ 15.607337] [drm:intel_power_well_enable [i915]] enabling display [ 15.607356] [drm:hsw_set_power_well.constprop.13 [i915]] Enabling power well [ 15.612726] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b45d) [ 15.615512] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized! [ 15.615514] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized! [ 15.615515] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized! [ 15.615654] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input15 [ 15.615709] usbcore: registered new interface driver uvcvideo [ 15.615710] USB Video Class driver (1.1.1) [ 15.618169] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 15.618192] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 15.618211] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 15.618230] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 15.618249] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 15.618267] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 15.618284] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 15.618302] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 15.618319] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 15.618848] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 15.618915] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 15.618976] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 15.619033] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 15.619091] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 15.626198] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 15.626199] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 15.626199] RAPL PMU: hw unit of domain package 2^-14 Joules [ 15.626200] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 15.626201] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 15.628914] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.628916] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.628918] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 15.628919] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 15.628920] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 15.628921] snd_hda_codec_realtek hdaudioC2D0: Mic=0x1a [ 15.628923] snd_hda_codec_realtek hdaudioC2D0: Internal Mic=0x12 [ 15.648666] usb 3-3.1.3: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.651087] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input21 [ 15.658339] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input22 [ 15.685463] kvm: disabled by bios [ 15.692644] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 15.697444] intel_rapl: Found RAPL domain package [ 15.697445] intel_rapl: Found RAPL domain core [ 15.697446] intel_rapl: Found RAPL domain uncore [ 15.697447] intel_rapl: Found RAPL domain dram [ 15.723255] kvm: disabled by bios [ 15.756657] r8152 3-3.1.3:1.0 eth0: v1.08.8 [ 15.806594] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 15.810581] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 15.916699] audit: type=1400 audit(1486422656.747:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=959 comm="apparmor_parser" [ 15.919249] audit: type=1400 audit(1486422656.751:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=954 comm="apparmor_parser" [ 15.919253] audit: type=1400 audit(1486422656.751:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=954 comm="apparmor_parser" [ 15.921762] audit: type=1400 audit(1486422656.751:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=955 comm="apparmor_parser" [ 15.921765] audit: type=1400 audit(1486422656.751:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=955 comm="apparmor_parser" [ 15.921767] audit: type=1400 audit(1486422656.751:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=955 comm="apparmor_parser" [ 15.921770] audit: type=1400 audit(1486422656.751:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=955 comm="apparmor_parser" [ 15.922535] audit: type=1400 audit(1486422656.755:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=961 comm="apparmor_parser" [ 15.922537] audit: type=1400 audit(1486422656.755:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=961 comm="apparmor_parser" [ 15.924903] audit: type=1400 audit(1486422656.755:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=962 comm="apparmor_parser" [ 15.980963] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 16.040382] Adding 8261116k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8261116k SSFS [ 16.097379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.097381] Bluetooth: BNEP filters: protocol multicast [ 16.097384] Bluetooth: BNEP socket layer initialized [ 16.188390] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.217707] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.321380] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 16.358559] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 16.358702] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 16.358712] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 16.358735] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 16.421910] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 16.633748] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 16.638151] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 16.640523] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 16.640981] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 16.708262] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 16.708720] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 16.712205] [drm:drm_mode_addfb2 [drm]] [FB:72] [ 16.712307] [drm:drm_mode_setcrtc [drm]] [CRTC:31:pipe A] [ 16.712315] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:47:eDP-1] [ 16.736271] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 16.826606] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 16.949928] r8152 3-3.1.3:1.0 enx0050b6c5e367: renamed from eth0 [ 16.978408] IPv6: ADDRCONF(NETDEV_UP): enx0050b6c5e367: link is not ready [ 16.997068] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 16.997085] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 16.997099] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 16.997111] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 16.997126] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 16.997141] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 16.997156] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 16.997170] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 16.997185] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 17.026481] IPv6: ADDRCONF(NETDEV_UP): enx0050b6c5e367: link is not ready [ 18.398211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] [ 18.398236] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1] [ 18.398254] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 18.398272] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 18.398287] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 18.398302] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 18.398320] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 18.398342] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 18.398746] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 18.399095] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 18.399100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes : [ 18.399108] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 18.399246] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] [ 18.399260] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 18.399266] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] disconnected [ 18.399270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] [ 18.399283] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-2] [ 18.399288] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] disconnected [ 18.399292] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] [ 18.399305] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 18.401367] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 18.401381] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 18.403457] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 18.403469] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 18.405558] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 18.405576] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 18.407663] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 18.407672] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 18.407677] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] disconnected [ 18.407694] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] [ 18.407714] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-2] [ 18.409788] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 18.409814] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 18.411899] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 18.411911] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 18.413694] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 18.413719] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 18.415804] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 18.415813] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 18.415818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] disconnected [ 18.512240] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 21.505890] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 21.505914] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 37.665496] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 38.890112] wlp4s0: authenticate with bc:16:f5:b4:4e:ff [ 38.896233] wlp4s0: send auth to bc:16:f5:b4:4e:ff (try 1/3) [ 38.917846] wlp4s0: authenticated [ 38.918846] wlp4s0: associate with bc:16:f5:b4:4e:ff (try 1/3) [ 38.922022] wlp4s0: RX AssocResp from bc:16:f5:b4:4e:ff (capab=0x1111 status=0 aid=117) [ 38.923289] wlp4s0: associated [ 38.923315] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 38.976823] wlp4s0: Limiting TX power to 8 dBm as advertised by bc:16:f5:b4:4e:ff [ 39.224994] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 39.225017] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 39.225036] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 39.225054] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 39.225072] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 39.225090] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 39.225107] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 39.225124] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 39.225142] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 39.289612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] [ 39.289638] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1] [ 39.289660] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 39.289681] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 39.289701] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 39.289719] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 39.289739] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 39.289763] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 39.290184] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 39.290639] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 39.290647] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes : [ 39.290659] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 39.290812] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] [ 39.290835] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 39.290842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] disconnected [ 39.290884] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] [ 39.290903] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-2] [ 39.290910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] disconnected [ 39.290916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] [ 39.290936] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 39.292983] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 39.293004] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 39.294961] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 39.294975] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 39.297045] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 39.297066] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 39.299023] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 39.299031] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 39.299037] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] disconnected [ 39.299103] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] [ 39.299124] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-2] [ 39.301233] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 39.301259] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 39.303066] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 39.303080] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 39.305117] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 39.305131] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 39.306970] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 39.306979] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 39.306984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] disconnected [ 39.747358] [drm:drm_mode_addfb2 [drm]] [FB:73] [ 40.109548] Bluetooth: RFCOMM TTY layer initialized [ 40.109552] Bluetooth: RFCOMM socket layer initialized [ 40.109556] Bluetooth: RFCOMM ver 1.11 [ 42.503129] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 42.503151] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 53.235547] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x10101012, pins 0x00000020 [ 53.235567] [drm:intel_hpd_irq_handler [i915]] digital hpd port B - long [ 53.235586] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 0 [ 53.235630] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port B - long [ 53.235661] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions [ 53.235694] [drm:i915_hotplug_work_func [i915]] Connector DP-1 (pin 5) received hotplug event. [ 53.235717] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 53.236179] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 00 01 80 02 02 06 00 00 00 00 [ 53.236484] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.236506] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 53.236521] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 53.236535] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 [ 53.236548] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 [ 53.236705] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.236955] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.236985] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 [ 53.237141] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.237301] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.237319] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 53.237468] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.237628] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.237770] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.237930] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.238073] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.238216] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.238375] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.238518] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.238802] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.239089] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.239376] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.239663] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.240225] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.240515] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.240806] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.240955] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.241103] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.241266] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.241412] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.241712] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.242002] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.242293] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.242584] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.242874] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.243165] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.243456] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.243746] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.243897] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.243917] [drm:drm_detect_monitor_audio [drm]] Monitor has basic audio support [ 53.244074] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.244234] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.244264] [drm:i915_hotplug_work_func [i915]] [CONNECTOR:55:DP-1] status updated from disconnected to connected [ 53.244276] [drm:i915_hotplug_work_func [i915]] Connector HDMI-A-1 (pin 5) received hotplug event. [ 53.244289] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 53.246349] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 53.246363] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 53.247867] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 53.247878] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 53.249965] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 53.249982] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 53.251916] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 53.251924] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 53.253164] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] [ 53.253193] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 53.253640] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 00 01 80 02 02 06 00 00 00 00 [ 53.253941] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.253967] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 53.253980] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 53.253992] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 [ 53.254003] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 [ 53.254407] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 [ 53.254708] [drm:gen8_irq_handler [i915]] The master control interrupt lied (SDE)! [ 53.254735] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 53.255146] [drm:drm_edid_to_eld [drm]] ELD monitor U28E850 [ 53.255153] [drm:drm_edid_to_eld [drm]] ELD size 32, SAD count 1 [ 53.255167] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] probed modes : [ 53.255174] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 53.255181] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 [ 53.255188] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 53.255194] [drm:drm_mode_debug_printmodeline [drm]] Modeline 101:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 53.255201] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 53.255207] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 53.255214] [drm:drm_mode_debug_printmodeline [drm]] Modeline 92:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 53.255221] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 53.255227] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 53.255234] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 53.255240] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 53.255247] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 53.255254] [drm:drm_mode_debug_printmodeline [drm]] Modeline 102:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 53.255260] [drm:drm_mode_debug_printmodeline [drm]] Modeline 93:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 53.255267] [drm:drm_mode_debug_printmodeline [drm]] Modeline 94:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 53.255273] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 53.255279] [drm:drm_mode_debug_printmodeline [drm]] Modeline 96:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 53.255285] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 53.255289] [drm:drm_mode_debug_printmodeline [drm]] Modeline 98:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 53.255294] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 53.255298] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 53.255303] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 53.255309] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 53.255315] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 53.255321] [drm:drm_mode_debug_printmodeline [drm]] Modeline 103:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 53.255328] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 53.255334] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 53.968069] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 53.974745] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 53.974879] [drm:drm_mode_setcrtc [drm]] [CRTC:31:pipe A] [ 53.974886] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:47:eDP-1] [ 54.001169] [drm:drm_mode_setcrtc [drm]] [CRTC:38:pipe B] [ 54.001179] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:55:DP-1] [ 54.001210] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:55:DP-1] checking for sink bpp constrains [ 54.001228] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 30 [ 54.001246] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 533250KHz [ 54.001268] [drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 30 [ 54.001285] [drm:intel_dp_compute_config [i915]] DP link bw required 1999688 available 2160000 [ 54.001303] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 30, dithering: 0 [ 54.001321] [drm:intel_dump_pipe_config [i915]] [CRTC:38:pipe B][modeset] [ 54.001338] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 [ 54.001356] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 7766016, gmch_n: 8388608, link_m: 1035468, link_n: 1048576, tu: 64 [ 54.001373] [drm:intel_dump_pipe_config [i915]] audio: 1, infoframes: 0 [ 54.001390] [drm:intel_dump_pipe_config [i915]] requested mode: [ 54.001399] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x0 0x9 [ 54.001417] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 54.001426] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x0 0x9 [ 54.001444] [drm:intel_dump_pipe_config [i915]] crtc timings: 533250 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x0 flags: 0x9 [ 54.001458] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 3840x2160 [ 54.001476] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 54.001491] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 54.001508] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 54.001526] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 54.001542] [drm:intel_dump_pipe_config [i915]] [PLANE:32:primary B] disabled, scaler_id = 0 [ 54.001569] [drm:intel_dump_pipe_config [i915]] [PLANE:34:sprite B] disabled, scaler_id = 0 [ 54.001582] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor B] disabled, scaler_id = 0 [ 54.001599] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 540000, actual 540000 [ 54.001616] [drm:intel_reference_shared_dpll [i915]] using LCPLL 1350 for pipe A [ 54.001630] [drm:intel_reference_shared_dpll [i915]] using LCPLL 2700 for pipe B [ 54.019078] [drm:intel_edp_backlight_off.part.25 [i915]] [ 54.224216] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 54.224253] [drm:intel_disable_pipe [i915]] disabling pipe A [ 54.234250] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 54.234274] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 54.234443] [drm:edp_panel_off [i915]] Turn eDP port A panel power off [ 54.234460] [drm:edp_panel_off [i915]] Wait for panel power off time [ 54.234481] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 54.284752] [drm:wait_panel_status [i915]] Wait complete [ 54.284775] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A [ 54.284795] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 1350 (active 1, on? 1) for crtc 31 [ 54.284810] [drm:intel_disable_shared_dpll [i915]] disabling LCPLL 1350 [ 54.286909] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 [ 54.286928] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 54.286955] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 [ 54.286987] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz [ 54.287012] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 54.287031] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:DDI A] [ 54.287048] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DDI B] [ 54.287063] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST A] [ 54.287078] [drm:intel_atomic_commit_tail [i915]] [ENCODER:57:DP-MST B] [ 54.287092] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DP-MST C] [ 54.287106] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DDI C] [ 54.287121] [drm:intel_atomic_commit_tail [i915]] [ENCODER:63:DP-MST A] [ 54.287140] [drm:intel_atomic_commit_tail [i915]] [ENCODER:64:DP-MST B] [ 54.287159] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DP-MST C] [ 54.287177] [drm:verify_single_dpll_state.isra.112 [i915]] WRPLL 1 [ 54.287196] [drm:verify_single_dpll_state.isra.112 [i915]] WRPLL 2 [ 54.287215] [drm:verify_single_dpll_state.isra.112 [i915]] SPLL [ 54.287233] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 810 [ 54.287251] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 1350 [ 54.287269] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 2700 [ 54.287290] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 1350 (active 1, on? 0) for crtc 31 [ 54.287308] [drm:intel_enable_shared_dpll [i915]] enabling LCPLL 1350 [ 54.287332] [drm:edp_panel_on [i915]] Turn eDP port A panel power on [ 54.287353] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 54.858012] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000 [ 54.858032] [drm:wait_panel_status [i915]] Wait complete [ 54.858062] [drm:edp_panel_on [i915]] Wait for panel power on [ 54.858083] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control abcd0003 [ 54.961233] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 [ 54.961251] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 54.961267] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 [ 54.961323] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 55.058627] [drm:wait_panel_status [i915]] Wait complete [ 55.058655] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 55.058677] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 55.059757] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 55.059768] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 55.059779] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 55.059790] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 55.060415] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 55.060426] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 55.061352] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 55.061405] [drm:intel_enable_pipe [i915]] enabling pipe A [ 55.061574] [drm:intel_edp_backlight_on.part.24 [i915]] [ 55.061586] [drm:intel_panel_enable_backlight [i915]] pipe A [ 55.061604] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 852 [ 55.072840] [drm:intel_psr_enable [i915]] PSR disable by flag [ 55.072855] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS [ 55.074867] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 55.074888] [drm:intel_fbc_enable [i915]] reserved 5529600 bytes of contiguous stolen space for FBC, threshold: 4 [ 55.074913] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 55.074941] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 2700 (active 2, on? 0) for crtc 38 [ 55.074955] [drm:intel_enable_shared_dpll [i915]] enabling LCPLL 2700 [ 55.076040] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 55.076061] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 55.076071] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 55.076082] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 55.076701] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 05000000 [ 55.076720] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1 [ 55.076730] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 [ 55.077351] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000 [ 55.077362] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2 [ 55.077372] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 [ 55.077984] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 55.078003] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3 [ 55.078929] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 55.080983] [drm:intel_enable_pipe [i915]] enabling pipe B [ 55.081347] [drm:intel_audio_codec_enable [i915]] ELD on [CONNECTOR:55:DP-1], [ENCODER:54:DDI B] [ 55.081362] [drm:hsw_audio_codec_enable [i915]] Enable audio codec on pipe B, 32 bytes ELD [ 55.081377] [drm:hsw_audio_config_update [i915]] using automatic Maud, Naud [ 55.095013] [drm:verify_connector_state.isra.82 [i915]] [CONNECTOR:47:eDP-1] [ 55.095036] [drm:intel_atomic_commit_tail [i915]] [CRTC:31:pipe A] [ 55.095060] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 1350 [ 55.095076] [drm:verify_connector_state.isra.82 [i915]] [CONNECTOR:55:DP-1] [ 55.095093] [drm:intel_atomic_commit_tail [i915]] [CRTC:38:pipe B] [ 55.095114] [drm:verify_single_dpll_state.isra.112 [i915]] LCPLL 2700 [ 55.164164] [drm:drm_mode_addfb2 [drm]] [FB:105] [ 58.304213] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 58.304237] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 59.719120] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 78.914290] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 90.662406] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 118.950471] [drm:drm_mode_addfb2 [drm]] [FB:105] [ 120.669250] [drm:drm_mode_addfb2 [drm]] [FB:105] [ 130.955723] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 145.270722] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 151.472596] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 160.815280] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 172.063156] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 189.782282] [drm:drm_mode_addfb2 [drm]] [FB:105] [ 191.838703] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 280.096846] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 325.898707] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 337.623293] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 339.545814] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 349.588986] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 359.425254] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 369.867334] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 379.598597] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 389.534954] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 399.617884] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 409.904721] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 420.972456] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 430.180940] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 446.780616] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 451.924545] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 459.904091] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 479.906120] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 490.336724] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 502.322931] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 522.727442] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 544.913921] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 550.453099] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 559.816872] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 569.953718] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 580.449067] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 590.021413] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 599.882215] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 615.719050] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 633.821212] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 641.058102] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 650.187327] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 660.098964] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 670.067118] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 679.972869] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 689.935972] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 711.376645] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 720.072642] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 731.805720] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 741.613980] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 750.180322] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 760.180251] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 771.829813] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 780.596342] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 837.045585] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 844.934566] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 858.001713] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 864.905505] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 869.199030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] [ 869.199078] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1] [ 869.199115] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 869.199150] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 869.199180] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 869.199210] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 869.199245] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 869.199281] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 869.199718] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 [ 869.200097] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 869.200108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:47:eDP-1] probed modes : [ 869.200126] [drm:drm_mode_debug_printmodeline [drm]] Modeline 48:"2560x1440" 60 237800 2560 2608 2640 2720 1440 1442 1445 1457 0x48 0x9 [ 869.200498] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] [ 869.200538] [drm:intel_dp_detect [i915]] [CONNECTOR:55:DP-1] [ 869.200997] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 00 01 80 02 02 06 00 00 00 00 [ 869.201344] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes [ 869.201374] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 869.201401] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 [ 869.201428] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 [ 869.201854] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 [ 869.202182] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 869.202690] [drm:drm_edid_to_eld [drm]] ELD monitor U28E850 [ 869.202704] [drm:drm_edid_to_eld [drm]] ELD size 32, SAD count 1 [ 869.202791] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:55:DP-1] probed modes : [ 869.202813] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0x9 [ 869.202832] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 [ 869.202847] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 869.202864] [drm:drm_mode_debug_printmodeline [drm]] Modeline 101:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 869.202880] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 869.202896] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 869.202913] [drm:drm_mode_debug_printmodeline [drm]] Modeline 92:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 869.202929] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 869.202946] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 869.202958] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 [ 869.202969] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 869.202982] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 869.202993] [drm:drm_mode_debug_printmodeline [drm]] Modeline 102:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 869.203004] [drm:drm_mode_debug_printmodeline [drm]] Modeline 93:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 869.203015] [drm:drm_mode_debug_printmodeline [drm]] Modeline 94:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 869.203027] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 869.203041] [drm:drm_mode_debug_printmodeline [drm]] Modeline 96:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 869.203056] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 869.203073] [drm:drm_mode_debug_printmodeline [drm]] Modeline 98:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 869.203087] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 869.203102] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 869.203119] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 869.203134] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 869.203151] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 869.203162] [drm:drm_mode_debug_printmodeline [drm]] Modeline 103:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 869.203173] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 869.203190] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 869.203261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] [ 869.203295] [drm:intel_dp_detect [i915]] [CONNECTOR:62:DP-2] [ 869.203306] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:62:DP-2] disconnected [ 869.203318] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] [ 869.203350] [drm:intel_hdmi_detect [i915]] [CONNECTOR:59:HDMI-A-1] [ 869.205434] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 869.205462] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 869.206835] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 869.206863] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 869.208946] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 869.208973] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 869.210842] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 869.210861] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 869.210879] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:HDMI-A-1] disconnected [ 869.210913] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] [ 869.210962] [drm:intel_hdmi_detect [i915]] [CONNECTOR:66:HDMI-A-2] [ 869.213128] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 869.213173] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 869.214891] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 869.214930] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 869.217051] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 869.217092] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 869.218894] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 869.218922] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 869.218933] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:HDMI-A-2] disconnected [ 872.415073] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 872.415116] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 876.056872] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 884.952836] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 895.070240] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 905.755449] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 918.247706] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 925.857470] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 939.226471] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 946.649032] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 955.565720] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 966.500160] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 978.932934] [drm:drm_mode_addfb2 [drm]] [FB:99] [ 986.239003] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1004.899858] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1005.233385] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 1006.589807] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 1015.243392] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1025.235871] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1039.186004] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 1045.591315] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1063.182226] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1067.240968] [drm:drm_mode_addfb2 [drm]] [FB:67] [ 1076.280324] [drm:drm_mode_addfb2 [drm]] [FB:68] [ 1086.331772] [drm:drm_mode_addfb2 [drm]] [FB:68]
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
