Hello,
I'm investigating a problem on a machine that has a Kabylake PCH but a
Skylake CPU i5-6500.
Problem is that I can install and use distributions that are based on an
older kernel, but newer Linux dristributions fail to boot even the
installer.
So far I managed to get Fedora 25 with a 4.9 kernel installed, but I
cannot reach runlevel 5. Booting to runlevel 3 shows this message in the
dmesg:
[ 1.816627] ------------[ cut here ]------------
[ 1.816943] WARNING: CPU: 5 PID: 373 at
drivers/gpu/drm/i915/i915_drv.c:210 i915_driver_load+0x1157/0x1410 [i915]
[ 1.817193] WARN_ON(!((&({ struct drm_i915_private *__p; if
(__builtin_types_compatible_p(typeof(*dev), struct drm_i915_private))
__p = (struct drm_i915_private *)dev; else if
(__builtin_types_compatible_p(typeof(*dev), struct drm_device)) __p =
to_i915((struct drm_device *)dev); else do { bool __cond = !(!(1));
extern void __compiletime_assert_210(void)
__attribute__((error("BUILD_BUG failed"))); if (__cond)
__compiletime_assert_210(); do { } while (0); } while (0); __p;
})->info)->is_kabylake))
[ 1.817251] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 1.818020] Modules linked in:
[ 1.818185] i915(+) i2c_algo_bit e1000e drm_kms_helper crc32c_intel
drm ptp serio_raw pps_core video i2c_hid fjes
[ 1.819091] CPU: 5 PID: 373 Comm: systemd-udevd Not tainted
4.9.5-200.fc25.x86_64 #1
Looking at i95_drv.c I find this code snipped that seems to be
responsible:
} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_SPT;
DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
WARN_ON(!IS_SKYLAKE(dev_priv) &&
!IS_KABYLAKE(dev_priv));
} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_SPT;
DRM_DEBUG_KMS("Found SunrisePoint LP
PCH\n");
WARN_ON(!IS_SKYLAKE(dev_priv) &&
!IS_KABYLAKE(dev_priv));
} else if (id == INTEL_PCH_KBP_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_KBP;
DRM_DEBUG_KMS("Found KabyPoint PCH\n");
WARN_ON(!IS_KABYLAKE(dev_priv));
I read from that, that the driver issues the warning when PCH is a
Kabypoint PCH, but the CPU based graphics is not from a Kabylake CPU.
This explains the warnings in the dmesg. But if I want to start the GUI,
the next problem rises:
[ 125.777880] gnome-shell[1665]: segfault at 0 ip 00007f49b6712789 sp
00007fff9100ca30 error 4 in libEGL.so.1.0.0[7f49b66f8000+30000]
So from my perspective it looks like, that something inside the i915
driver is going wrong when we mix up Skylake CPUs with Kabylake
Chipsets. The same system works pretty well when I replace the Skylake
CPU with a Kabylake CPU.
On the other hand we have boards with a H110 chipset (Sunrise Point)
that also support Kabylake CPUs and where this problem doesn't occur.
So my questions is what is the status of the driver regarding the
combination of Skylake CPU with Kabylake chipset?
Thanks
Rainer
--
Dipl.-Inf. (FH) Rainer Koenig
Project Manager Linux Clients
FJ EMEIA PR PSO PM&D CCD ENG SW OSS&C
Fujitsu Technology Solutions
Bürgermeister-Ullrich-Str. 100
86199 Augsburg
Germany
Telephone: +49-821-804-3321
Telefax: +49-821-804-2131
Mail: mailto:Rainer.Koenig@xxxxxxxxxxxxxx
Internet ts.fujtsu.com
Company Details ts.fujitsu.com/imprint.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
