Re: [PATCH i-g-t v3 10/11] tests/kms_atomic_transition: add out_fences tests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2017-01-31 11:52 AM, Brian Starkey wrote:
On Mon, Jan 30, 2017 at 08:58:46PM -0500, Robert Foss wrote:
Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxxxxx>
---
lib/igt_kms.c                 |  35 ++++++----
tests/kms_atomic_transition.c | 148
++++++++++++++++++++++++++++++++++++++++++
2 files changed, 169 insertions(+), 14 deletions(-)

diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index f14496dd..523f3f57 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -53,6 +53,7 @@
#include "intel_chipset.h"
#include "igt_debugfs.h"
#include "igt_sysfs.h"
+#include "sw_sync.h"

/**
 * SECTION:igt_kms
@@ -2479,6 +2480,21 @@ static int igt_atomic_commit(igt_display_t
*display, uint32_t flags, void *user_
    }

    ret = drmModeAtomicCommit(display->drm_fd, req, flags, user_data);
+    if (!ret) {
+
+        for_each_pipe(display, pipe) {
+            igt_pipe_t *pipe_obj = &display->pipes[pipe];
+
+            if (pipe_obj->out_fence != -1)
+                continue;

Should be "if (pipe_obj->fence == -1)" ? The stuff below seems to be
assuming the fence is valid.


Correct, fixed in v4.

+
+            igt_assert(pipe_obj->out_fence >= 0);
+            ret = sync_fence_wait(pipe_obj->out_fence, 1000);
+            igt_assert(ret == 0);
+            close(pipe_obj->out_fence);
+        }
+    }
+
    drmModeAtomicFree(req);
    return ret;

@@ -2972,6 +2988,11 @@ void igt_plane_set_rotation(igt_plane_t *plane,
igt_rotation_t rotation)
    plane->rotation_changed = true;
}

+void igt_pipe_request_out_fence(igt_pipe_t *pipe)

Oh here it is!

+{
+    pipe->out_fence_requested = true;
+}
+
void
igt_pipe_set_degamma_lut(igt_pipe_t *pipe, void *ptr, size_t length)
{
@@ -2994,20 +3015,6 @@ igt_pipe_set_gamma_lut(igt_pipe_t *pipe, void
*ptr, size_t length)
}

/**
- * igt_pipe_set_out_fence_ptr:
- * @pipe: pipe pointer to which background color to be set
- * @fence_ptr: out fence pointer
- *
- * Sets the out fence pointer that will be passed to the kernel in
- * the atomic ioctl. When the kernel returns the out fence pointer
- * will contain the fd number of the out fence created by KMS.
- */
-void igt_pipe_set_out_fence_ptr(igt_pipe_t *pipe, int64_t *fence_ptr)

... and there this one goes. This deletion and the function above
need to be squashed into the earlier commit I suppose.


Ack, fixed in v4.

-{
-    pipe->out_fence_ptr = fence_ptr;
-}
-
-/**
 * igt_crtc_set_background:
 * @pipe: pipe pointer to which background color to be set
 * @background: background color value in BGR 16bpc
diff --git a/tests/kms_atomic_transition.c
b/tests/kms_atomic_transition.c
index 72429759..eebb5d66 100644
--- a/tests/kms_atomic_transition.c
+++ b/tests/kms_atomic_transition.c
@@ -253,6 +253,93 @@ retry:
         sprite_width, sprite_height, alpha);
}

+int *timeline;
+pthread_t *thread;
+int *seqno;
+
+static void prepare_fencing(igt_display_t *display, enum pipe pipe)
+{
+    igt_plane_t *plane;
+    int n_planes;
+
+    igt_require_sw_sync();
+
+    n_planes = display->pipes[pipe].n_planes;
+        timeline = calloc(sizeof(*timeline), n_planes);
+        igt_assert_f(timeline != NULL, "Failed to allocate memory for
timelines\n");
+        thread = calloc(sizeof(*thread), n_planes);
+        igt_assert_f(thread != NULL, "Failed to allocate memory for
thread\n");
+        seqno = calloc(sizeof(*seqno), n_planes);
+        igt_assert_f(seqno != NULL, "Failed to allocate memory for
seqno\n");

The 6 lines above are space-indented


Ack, fixed in v4.

+
+    for_each_plane_on_pipe(display, pipe, plane)
+        timeline[plane->index] = sw_sync_timeline_create();
+}
+
+static void unprepare_fencing(igt_display_t *display, enum pipe pipe)
+{
+    igt_plane_t *plane;
+
+    for_each_plane_on_pipe(display, pipe, plane)
+        close(timeline[plane->index]);
+
+    free(timeline);
+    free(thread);
+    free(seqno);
+}
+
+static void *fence_inc_thread(void *arg)
+{
+    int t = *((int *) arg);
+
+    pthread_detach(pthread_self());
+
+    usleep(5000);
+    sw_sync_timeline_inc(t, 1);
+    return NULL;
+}
+
+static void configure_fencing(igt_display_t *display, enum pipe pipe)
+{
+    igt_plane_t *plane;
+    int i, fd, ret;
+
+    for_each_plane_on_pipe(display, pipe, plane) {
+
+        if (!plane->fb)
+            continue;
+
+        i = plane->index;
+
+        seqno[i]++;
+        fd = sw_sync_timeline_create_fence(timeline[i], seqno[i]);
+        igt_plane_set_fence_fd(plane, fd);
+        ret = pthread_create(&thread[i], NULL, fence_inc_thread,
&timeline[i]);
+        igt_assert_eq(ret, 0);
+    }
+}
+
+static void clear_fencing(igt_display_t *display, enum pipe pipe)
+{
+    igt_plane_t *plane;
+
+    for_each_plane_on_pipe(display, pipe, plane)
+        igt_plane_set_fence_fd(plane, -1);

Someone should close the old fence_fd if it's not -1.

I think igt_plane_set_fence_fd() should dup() the passed in fence, and
igt_display_atomic_commit() should set it to -1 after the commit.

That makes it very obvious, and that way igt_plane_set_fence_fd() can
always safely close plane->fence_fd if it gets called while the
current fence_fd is valid, because it always owns that fd. Callers
have their own copy to take care of.

In any case, I think you're leaking fds here.


Fixed in v4:
 - Implemented igt_plane_set_fence_fd logic
 - Added close() to callers with valid FDs

+}
+
+static void atomic_commit(igt_display_t *display, enum pipe pipe,
unsigned int flags, void *data, bool fencing)
+{
+    if (fencing) {
+        configure_fencing(display, pipe);
+        igt_pipe_request_out_fence(&display->pipes[pipe]);
+    }
+
+    igt_display_commit_atomic(display, flags, data);
+
+    if (fencing)
+        clear_fencing(display, pipe);
+}
+
/*
 * 1. Set primary plane to a known fb.
 * 2. Make sure getcrtc returns the correct fb id.
@@ -273,6 +360,7 @@ run_transition_test(igt_display_t *display, enum
pipe pipe, igt_output_t *output
    struct plane_parms parms[display->pipes[pipe].n_planes];
    bool skip_test = false;
    unsigned flags = DRM_MODE_PAGE_FLIP_EVENT;
+    int ret;

    if (nonblocking)
        flags |= DRM_MODE_ATOMIC_NONBLOCK;
@@ -307,11 +395,50 @@ run_transition_test(igt_display_t *display, enum
pipe pipe, igt_output_t *output

    setup_parms(display, pipe, mode, &argb_fb, &sprite_fb, parms);

+    /*
+     * In some configurations the tests may not run to completion
with all
+     * sprite planes lit up at 4k resolution, try decreasing
width/size of secondary
+     * planes to fix this
+     */
+    while (1) {
+        wm_setup_plane(display, pipe, iter_max - 1, parms);
+
+        if (fencing)
+            igt_pipe_set_out_fence_ptr(&display->pipes[pipe],

That function was deleted in this patch.

Fixed in v4.


+                (int64_t *) &out_fence);
+        ret = igt_display_try_commit_atomic(display,
DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+
+        if (ret != -EINVAL || n_planes < 3)
+            break;
+
+        ret = 0;
+        for_each_plane_on_pipe(display, pipe, plane) {
+            i = plane->index;
+
+            if (plane->is_primary || plane->is_cursor)
+                continue;
+
+            if (parms[i].width <= 512)
+                continue;
+
+            parms[i].width /= 2;
+            ret = 1;
+            igt_info("Reducing sprite %i to %ux%u\n", i - 1,
parms[i].width, parms[i].height);
+            break;
+        }
+
+        if (!ret)
+            igt_skip("Cannot run tests without proper size sprite
planes\n");
+    }
+
    for (i = 0; i < iter_max; i++) {
        igt_output_set_pipe(output, pipe);

        wm_setup_plane(display, pipe, i, parms);

+        if (fencing)
+            igt_pipe_set_out_fence_ptr(&display->pipes[pipe],
&out_fence);

Same again.

Fixed in v4.


+
        igt_display_commit_atomic(display, flags, (void *)(unsigned
long)i);
        drmHandleEvent(display->drm_fd, &drm_events);

@@ -320,6 +447,9 @@ run_transition_test(igt_display_t *display, enum
pipe pipe, igt_output_t *output

            wm_setup_plane(display, pipe, 0, parms);

+            if (fencing)
+                igt_pipe_request_out_fence(&display->pipes[pipe]);
+
            igt_display_commit_atomic(display, flags, (void *)0UL);

            drmHandleEvent(display->drm_fd, &drm_events);
@@ -333,6 +463,9 @@ run_transition_test(igt_display_t *display, enum
pipe pipe, igt_output_t *output
                if (type == TRANSITION_MODESET)
                    igt_output_override_mode(output, &override_mode);

+                if (fencing)
+                    igt_pipe_set_out_fence_ptr(&display->pipes[pipe],
&out_fence);

etc.

Fixed in v4.


-Brian

+
                igt_display_commit_atomic(display, flags, (void
*)(unsigned long)j);
                drmHandleEvent(display->drm_fd, &drm_events);

@@ -340,6 +473,9 @@ run_transition_test(igt_display_t *display, enum
pipe pipe, igt_output_t *output
                if (type == TRANSITION_MODESET)
                    igt_output_override_mode(output, NULL);

+                if (fencing)
+                    igt_pipe_set_out_fence_ptr(&display->pipes[pipe],
&out_fence);
+
                igt_display_commit_atomic(display, flags, (void
*)(unsigned long)i);
                drmHandleEvent(display->drm_fd, &drm_events);
            }
@@ -676,14 +812,26 @@ igt_main
        for_each_pipe_with_valid_output(&display, pipe, output)
            run_transition_test(&display, pipe, output,
TRANSITION_PLANES, false, false);

+    igt_subtest("plane-all-transition-fencing")
+        for_each_pipe_with_valid_output(&display, pipe, output)
+            run_transition_test(&display, pipe, output,
TRANSITION_PLANES, false, true);
+
    igt_subtest("plane-all-transition-nonblocking")
        for_each_pipe_with_valid_output(&display, pipe, output)
            run_transition_test(&display, pipe, output,
TRANSITION_PLANES, true, false);

+    igt_subtest("plane-all-transition-nonblocking-fencing")
+        for_each_pipe_with_valid_output(&display, pipe, output)
+            run_transition_test(&display, pipe, output,
TRANSITION_PLANES, true, true);
+
    igt_subtest("plane-all-modeset-transition")
        for_each_pipe_with_valid_output(&display, pipe, output)
            run_transition_test(&display, pipe, output,
TRANSITION_MODESET, false, false);

+    igt_subtest("plane-all-modeset-transition-fencing")
+        for_each_pipe_with_valid_output(&display, pipe, output)
+            run_transition_test(&display, pipe, output,
TRANSITION_MODESET, false, true);
+
    igt_subtest("plane-toggle-modeset-transition")
        for_each_pipe_with_valid_output(&display, pipe, output)
            run_transition_test(&display, pipe, output,
TRANSITION_MODESET_DISABLE, false, false);
--
2.11.0.453.g787f75f05

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux