After going through all the trouble of splitting out parts from
drm_crtc.[hc] and then properly documenting each I've entirely
forgotten to show the same TLC for CRTCs themselves!
Let's make amends asap.
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
Documentation/gpu/drm-kms.rst | 6 ++++++
drivers/gpu/drm/drm_crtc.c | 21 +++++++++++++++++++++
include/drm/drm_crtc.h | 25 +++++++++++++++++++------
3 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 35c41cf84a1b..979cee853bb1 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -284,6 +284,12 @@ Atomic Mode Setting Function Reference
CRTC Abstraction
================
+.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
+ :doc: overview
+
+CRTC Functions Reference
+--------------------------------
+
.. kernel-doc:: include/drm/drm_crtc.h
:internal:
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5f28e3a5a3e0..6915f897bd8e 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -47,6 +47,27 @@
#include "drm_internal.h"
/**
+ * DOC: overview
+ *
+ * A CRTC represents the overall display pipeline. It receives pixel data from
+ * &drm_plane and blends them together. The &drm_display_mode is also attached
+ * to the CRTC, specifying display timings. On the output side the data is fed
+ * to one or more &drm_encoder, which are then each connected to one
+ * &drm_connector.
+ *
+ * To create a CRTC, a KMS drivers allocates and zeroes an instances of
+ * &struct drm_crtc (possibly as part of a larger structure) and registers it
+ * with a call to drm_crtc_init_with_planes().
+ *
+ * The CRTC is also the entry point for legacy modeset operations, see
+ * &drm_crtc_funcs.set_config, legacy plane operations, see
+ * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
+ * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
+ * features are controlled through &drm_property and
+ * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check.
+ */
+
+/**
* drm_crtc_from_index - find the registered CRTC at an index
* @dev: DRM device
* @idx: index of registered CRTC to find for
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 816edab054e6..d788c624f67a 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -641,7 +641,7 @@ struct drm_crtc {
*
* This provides a read lock for the overall crtc state (mode, dpms
* state, ...) and a write lock for everything which can be update
- * without a full modeset (fb, cursor data, crtc properties ...). Full
+ * without a full modeset (fb, cursor data, crtc properties ...). A full
* modeset also need to grab &drm_mode_config.connection_mutex.
*/
struct drm_modeset_lock mutex;
@@ -774,10 +774,8 @@ struct drm_crtc {
* @connectors: array of connectors to drive with this CRTC if possible
* @num_connectors: size of @connectors array
*
- * Represents a single crtc the connectors that it drives with what mode
- * and from which framebuffer it scans out from.
- *
- * This is used to set modes.
+ * This represents a modeset configuration for the legacy SETCRTC ioctl and is
+ * also used internally. Atomic drivers instead use &drm_atomic_state.
*/
struct drm_mode_set {
struct drm_framebuffer *fb;
@@ -832,7 +830,15 @@ int drm_crtc_force_disable_all(struct drm_device *dev);
int drm_mode_set_config_internal(struct drm_mode_set *set);
struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
-/* Helpers */
+/**
+ * drm_crtc_find - look up a CRTC object from its ID
+ * @dev: DRM device
+ * @id: &drm_mode_object ID
+ *
+ * This can be used to look up a CRTC from its userspace ID. Only used by
+ * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
+ * userspace interface should be done using &drm_property.
+ */
static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
uint32_t id)
{
@@ -841,6 +847,13 @@ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
return mo ? obj_to_crtc(mo) : NULL;
}
+/**
+ * drm_for_each_crtc - iterate over all encoders
+ * @crtc: a &struct drm_crtc as the loop cursor
+ * @dev: the &struct drm_device
+ *
+ * Iterate over all CRTCs of @dev.
+ */
#define drm_for_each_crtc(crtc, dev) \
list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
