Re: [PATCH 3/4] drm: Add definitions for DP compliance Video pattern tests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 20, 2017 at 05:33:51PM +0200, Jani Nikula wrote:
> On Fri, 20 Jan 2017, Manasi Navare <manasi.d.navare@xxxxxxxxx> wrote:
> > v3:
> > * Fix the conventions in bit definitions (Jani Nikula)
> > v2:
> > * Add all the other DP Complianec TEST register defs (Jani Nikula)
> > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> > Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > ---
> >  include/drm/drm_dp_helper.h | 64 +++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 64 insertions(+)
> >
> > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > index 0468135..7ab4153 100644
> > --- a/include/drm/drm_dp_helper.h
> > +++ b/include/drm/drm_dp_helper.h
> > @@ -417,6 +417,70 @@
> >  #define DP_TEST_LANE_COUNT		    0x220
> >  
> >  #define DP_TEST_PATTERN			    0x221
> > +# define DP_NO_TEST_PATTERN                 0x0
> > +# define DP_COLOR_RAMP                      0x1
> > +# define DP_BLACK_AND_WHITE_VERTICAL_LINES  0x2
> > +# define DP_COLOR_SQUARE                    0x3
> > +
> > +#define DP_TEST_H_TOTAL_HI                  0x222
> > +#define DP_TEST_H_TOTAl_LO                  0x223
>                          ^
> Sorry, didn't notice it before, but the l in TOTAL is lower case.
>

Oh yes even my eyes didnt catch this.

 
> > +
> > +#define DP_TEST_V_TOTAL_HI                  0x224
> > +#define DP_TEST_V_TOTAl_LO                  0x225
>                          ^
> Ditto.
> 
> > +
> > +#define DP_TEST_H_START_HI                  0x226
> > +#define DP_TEST_H_START_LO                  0x227
> > +
> > +#define DP_TEST_V_START_HI                  0x228
> > +#define DP_TEST_V_START_LO                  0x229
> > +
> > +#define DP_TEST_HSYNC_HI                    0x22A
> > +# define DP_TEST_HSYNC_POLARITY             (1 << 7)
> > +# define DP_TEST_HSYNC_WIDTH_HI_MASK        (127 << 0)
> > +#define DP_TEST_HSYNC_WIDTH_LO              0x22B
> > +
> > +#define DP_TEST_VSYNC_HI                    0x22C
> > +# define DP_TEST_VSYNC_POLARITY             (1 << 7)
> > +# define DP_TEST_VSYNC_WIDTH_HI_MASK        (127 << 0)
> > +#define DP_TEST_VSYNC_WIDTH_LO              0x22D
> > +
> > +#define DP_TEST_H_WIDTH_HI                  0x22E
> > +#define DP_TEST_H_WIDTH_LO                  0x22F
> > +
> > +#define DP_TEST_V_HEIGHT_HI                 0x230
> > +#define DP_TEST_V_HEIGHT_LO                 0x231
> > +
> > +#define DP_TEST_MISC0                       0x232
> > +# define DP_TEST_SYNC_CLOCK                 (1 << 0)
> > +# define DP_CLOCK_ASYNC                     0x0
> > +# define DP_CLOCK_SYNC                      0x1
> 
> The above two are not necessary.
>

Wont these above defs be required for checking if it is DP_CLOCK_ASYNC or SYNC?
I can remove the DP_CLOCK_SINK.
 
> > +# define DP_TEST_COLOR_FORMAT_MASK          (3 << 1)
> > +# define DP_TEST_COLOR_FORMAT_SHIFT         1
> > +# define DP_COLOR_FORMAT_RGB                (0 << 1)
> > +# define DP_COLOR_FORMAT_YCbCr422           (1 << 1)
> > +# define DP_COLOR_FORMAT_YCbCr444           (2 << 1)
> > +# define DP_TEST_DYNAMIC_RANGE              (1 << 3)
> 
> I'd just name this DP_TEST_DYNAMIC_RANGE_CEA...
> 
> > +# define DP_VESA_RANGE                      (0 << 3)
> > +# define DP_CEA_RANGE                       (1 << 3)
> 
> ...and drop these two. But whatever.
>

But then how do I check for VESA?
 
> > +# define DP_TEST_YCBCR_COEFFICIENTS         (1 << 4)
> > +# define DP_YCBCR_COEFFICIENTS_ITU601       (0 << 4)
> > +# define DP_YCBCR_COEFFICIENTS_ITU709       (1 << 4)
> > +# define DP_TEST_BIT_DEPTH_MASK             (7 << 5)
> > +# define DP_TEST_BIT_DEPTH_SHIFT            5
> > +# define DP_TEST_BIT_DEPTH_6                (0 << 5)
> > +# define DP_TEST_BIT_DEPTH_8                (1 << 5)
> > +# define DP_TEST_BIT_DEPTH_10               (2 << 5)
> > +# define DP_TEST_BIT_DEPTH_12               (3 << 5)
> > +# define DP_TEST_BIT_DEPTH_16               (4 << 5)
> 
> Blank line here.
>

This blank line is on purpose since I am starting a diff register

Manasi

 
> > +#define DP_TEST_MISC1                       0x233
> > +# define DP_TEST_REFRESH_DENOMINATOR        (1 << 0)
> > +# define REFRESH_DENOMINATOR_1              0x0
> > +# define REFRESH_DENOMINATOR_1_001          0x1
> 
> DP_ prefix.
> 
> > +# define DP_TEST_INTERLACED                 (1 << 1)
> > +# define DP_NON_INTERLACED                  (0 << 1)
> > +# define DP_INTERLACED                      (1 << 1)
> 
> No need for these two. DP_TEST_INTERLACED is sufficient.
> 
> > +
> > +#define DP_TEST_REFRESH_RATE_NUMERATOR      0x234
> >  
> >  #define DP_TEST_CRC_R_CR		    0x240
> >  #define DP_TEST_CRC_G_Y			    0x242
> 
> -- 
> Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux