> -----Original Message-----
> From: Nikula, Jani
> Sent: Wednesday, January 18, 2017 9:00 PM
> To: Chauhan, Madhav <madhav.chauhan@xxxxxxxxx>; intel-
> gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Shankar, Uma <uma.shankar@xxxxxxxxx>; Mukherjee, Indranil
> <indranil.mukherjee@xxxxxxxxx>; Kamath, Sunil <sunil.kamath@xxxxxxxxx>;
> Saarinen, Jani <jani.saarinen@xxxxxxxxx>; Conselvan De Oliveira, Ander
> <ander.conselvan.de.oliveira@xxxxxxxxx>; Konduru, Chandra
> <chandra.konduru@xxxxxxxxx>; Kumar, Shobhit
> <shobhit.kumar@xxxxxxxxx>; Syrjala, Ville <ville.syrjala@xxxxxxxxx>; Deepak
> M <m.deepak@xxxxxxxxx>; Chauhan, Madhav
> <madhav.chauhan@xxxxxxxxx>
> Subject: Re: [GLK MIPI DSI V3 2/7] drm/i915/glk: Program new MIPI DSI PHY
> registers for GLK
>
> On Mon, 02 Jan 2017, Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
> wrote:
> > From: Deepak M <m.deepak@xxxxxxxxx>
> >
> > Program the clk lane and tlpx time count registers to configure DSI
> > PHY.
> >
> > v2: Addressed Jani's Review comments(renamed bit field macros)
> > v3: Program clk lane timing reg same as dphy param reg.
> >
> > Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
> > Signed-off-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
> > drivers/gpu/drm/i915/intel_dsi.c | 7 +++++++
> > 2 files changed, 15 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h index 00970aa..f111c3f 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -8554,6 +8554,14 @@ enum {
> > #define LP_BYTECLK_SHIFT 0
> > #define LP_BYTECLK_MASK (0xffff << 0)
> >
> > +#define _MIPIA_TLPX_TIME_COUNT (dev_priv->mipi_mmio_base
> + 0xb0a4)
> > +#define _MIPIC_TLPX_TIME_COUNT (dev_priv->mipi_mmio_base
> + 0xb8a4)
> > +#define MIPI_TLPX_TIME_COUNT(port) _MMIO_MIPI(port,
> _MIPIA_TLPX_TIME_COUNT, _MIPIC_TLPX_TIME_COUNT)
> > +
> > +#define _MIPIA_CLK_LANE_TIMING (dev_priv->mipi_mmio_base
> + 0xb098)
> > +#define _MIPIC_CLK_LANE_TIMING (dev_priv->mipi_mmio_base
> + 0xb898)
> > +#define MIPI_CLK_LANE_TIMING(port) _MMIO_MIPI(port,
> _MIPIA_CLK_LANE_TIMING, _MIPIC_CLK_LANE_TIMING)
> > +
> > /* bits 31:0 */
> > #define _MIPIA_LP_GEN_DATA (dev_priv->mipi_mmio_base
> + 0xb064)
> > #define _MIPIC_LP_GEN_DATA (dev_priv->mipi_mmio_base
> + 0xb864)
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > b/drivers/gpu/drm/i915/intel_dsi.c
> > index 16732e7..be81283 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -1279,6 +1279,13 @@ static void intel_dsi_prepare(struct
> intel_encoder *intel_encoder,
> > */
> > I915_WRITE(MIPI_LP_BYTECLK(port), intel_dsi->lp_byte_clk);
>
> IIUC you also need to write 1 to MIPI_LP_BYTECLK(port) on GLK. Or how do
> you read the spec on the register?
Sorry if I missed, is it mentioned in spec that MIPI_LP_BYTECLK(port) will be programmed to '1'??
Checked spec, couldn't find this. Please specify.
>
> >
> > + if (IS_GEMINILAKE(dev_priv)) {
> > + I915_WRITE(MIPI_TLPX_TIME_COUNT(port),
> > + intel_dsi->lp_byte_clk);
> > + /* Shadow of DPHY reg */
> > + I915_WRITE(MIPI_CLK_LANE_TIMING(port), intel_dsi-
> >dphy_reg);
>
> The spec lists only specific valid values for the register. Is the spec right?
Spec mentions DPHY parameters i.e. exit, trail, count, prep should be programmed in
terms of byte clock which is same as for DPHY param reg. To confirm this, printed clk lane timing
register value programmed by BIOS and its same as DPHY param reg value.
>
> BR,
> Jani.
>
> > + }
> > +
> > /* the bw essential for transmitting 16 long packets
> containing
> > * 252 bytes meant for dcs write memory command is
> programmed in
> > * this register in terms of byte clocks. based on dsi transfer
>
> --
> Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
