This and all the remaining patches on this series (6,7,8 and 9) got
merged to dinq.
Thanks for the patches.
On Thu, Jan 12, 2017 at 12:12 PM, Vivi, Rodrigo <rodrigo.vivi@xxxxxxxxx> wrote:
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
>
> On Fri, 2017-01-13 at 00:31 +0530, vathsala nagaraju wrote:
>> As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15 must be programmed in
>> psr2 enable sequence.
>> bit 12 : Program Transcoder EDP VSC DIP header with a valid setting for
>> PSR2 and Set CHICKEN_TRANS_EDP(0x420cc) bit 12 for programmable
>> header packet.
>> bit 15 : Set CHICKEN_TRANS_EDP(0x420cc) bit 15 if Y coordinate is supported
>>
>> v2: (Rodrigo)
>> - move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
>>
>> v3:(Rodrigo)
>> - initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
>>
>> v4:(chris wilson)
>> - use BIT(12), remove CHICKEN_TRANS_BIT12
>> - remove unnecessary comments
>> - update commit message
>>
>> v5:
>> - rename bit 12 PSR2_VSC_ENABLE_PROG_HEADER
>> - rename bit 15 PSR2_ADD_VERTICAL_LINE_COUNT
>>
>> v6:(Rodrigo)
>> - remove TRANS_EDP=3, use cpu_transcoder
>>
>> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
>> Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
>> Signed-off-by: vathsala nagaraju <vathsala.nagaraju@xxxxxxxxx>
>> Signed-off-by: Patil Deepti <deepti.patil@xxxxxxxxx>
>> ---
>> drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
>> drivers/gpu/drm/i915/intel_psr.c | 7 +++++++
>> 2 files changed, 13 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index 7830e6e..c9c1ccd 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -6449,6 +6449,12 @@ enum {
>> #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0)
>> #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B)
>>
>> +#define CHICKEN_TRANS_A 0x420c0
>> +#define CHICKEN_TRANS_B 0x420c4
>> +#define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A, CHICKEN_TRANS_B)
>> +#define PSR2_VSC_ENABLE_PROG_HEADER (1<<12)
>> +#define PSR2_ADD_VERTICAL_LINE_COUNT (1<<15)
>> +
>> #define DISP_ARB_CTL _MMIO(0x45000)
>> #define DISP_FBC_MEMORY_WAKE (1<<31)
>> #define DISP_TILE_SURFACE_SWIZZLING (1<<13)
>> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
>> index 36c4045..935402e 100644
>> --- a/drivers/gpu/drm/i915/intel_psr.c
>> +++ b/drivers/gpu/drm/i915/intel_psr.c
>> @@ -480,6 +480,9 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>> struct drm_device *dev = intel_dig_port->base.base.dev;
>> struct drm_i915_private *dev_priv = to_i915(dev);
>> + struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
>> + enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
>> + u32 chicken;
>>
>> if (!HAS_PSR(dev_priv)) {
>> DRM_DEBUG_KMS("PSR not supported on this platform\n");
>> @@ -505,6 +508,10 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>> if (HAS_DDI(dev_priv)) {
>> if (dev_priv->psr.psr2_support) {
>> skl_psr_setup_su_vsc(intel_dp);
>> + chicken = PSR2_VSC_ENABLE_PROG_HEADER;
>> + if (dev_priv->psr.y_cord_support)
>> + chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
>> + I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
>> } else {
>> /* set up vsc header for psr1 */
>> hsw_psr_setup_vsc(intel_dp);
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
