Re: [PATCH] drm/i915/huc: Add HuC fw loading support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 11, 2017 at 05:15:14AM -0800, Anusha Srivatsa wrote:
> The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
> is used for both cases.
> 
> HuC loading needs to be before GuC loading. The WOPCM setting must
> be done early before loading any of them.
> 
> v2: rebased on-top of drm-intel-nightly.
>     removed if(HAS_GUC()) before the guc call. (D.Gordon)
>     update huc_version number of format.
> v3: rebased to drm-intel-nightly, changed the file name format to
>     match the one in the huc package.
>     Changed dev->dev_private to to_i915()
> v4: moved function back to where it was.
>     change wait_for_atomic to wait_for.
> v5: rebased + comment changes.
> v7: rebased.
> v8: rebased.
> v9: rebased. Changed the year in the copyright message to reflect
> the right year.Correct the comments,remove the unwanted WARN message,
> replace drm_gem_object_unreference() with i915_gem_object_put().Make the
> prototypes in intel_huc.h non-extern.
> v10: rebased. Update the file construction done by HuC. It is similar to
> GuC.Adopted the approach used in-
> https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
> v11: Fix warnings remove old declaration
> v12: Change dev to dev_priv in macro definition.
> Corrected comments.
> v13: rebased.
> v14: rebased on top of drm-tip
> v15: rebased. Updated functions intel_huc_load(),intel_huc_init() and
> intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents
> of intel_huc.h to intel_uc.h
> v16: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size().
> Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to
> simply fw to avoid redundency.
> v17: rebased.
> v18: rebased. Correct comments.
> v19: rebased. Correct comments. move definition to i915_guc_reg.h from
> intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer()
> instead of guc_ucode_xfer(). Add suitable WARNs to give extra info.
> 
> Cc: Arkadiusz Hiler <arkadiusz.hiler@xxxxxxxxx>
> Cc: Michal Wajdeczko <michal.wajdeczko@xxxxxxxxx>
> Tested-by: Xiang Haihao <haihao.xiang@xxxxxxxxx>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> Signed-off-by: Alex Dai <yu.dai@xxxxxxxxx>
> Signed-off-by: Peter Antoine <peter.antoine@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/Makefile           |   1 +
>  drivers/gpu/drm/i915/i915_drv.c         |   3 +
>  drivers/gpu/drm/i915/i915_drv.h         |   2 +
>  drivers/gpu/drm/i915/i915_guc_reg.h     |   6 +
>  drivers/gpu/drm/i915/intel_guc_loader.c |   7 +-
>  drivers/gpu/drm/i915/intel_huc_loader.c | 265 ++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_uc.h         |  14 ++
>  7 files changed, 295 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
> 
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 5196509..45ae124 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -57,6 +57,7 @@ i915-y += i915_cmd_parser.o \
>  # general-purpose microcontroller (GuC) support
>  i915-y += intel_uc.o \
>  	  intel_guc_loader.o \
> +	  intel_huc_loader.o \
>  	  i915_guc_submission.o
>  
>  # autogenerated null render state
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index aefab9a..5a90829 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -599,6 +599,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
>  	if (ret)
>  		goto cleanup_irq;
>  
> +	intel_huc_init(dev_priv);
>  	intel_guc_init(dev_priv);
>  
>  	ret = i915_gem_init(dev_priv);
> @@ -627,6 +628,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
>  	i915_gem_fini(dev_priv);
>  cleanup_irq:
>  	intel_guc_fini(dev_priv);
> +	intel_huc_fini(dev);
>  	drm_irq_uninstall(dev);
>  	intel_teardown_gmbus(dev_priv);
>  cleanup_csr:
> @@ -1314,6 +1316,7 @@ void i915_driver_unload(struct drm_device *dev)
>  	drain_workqueue(dev_priv->wq);
>  
>  	intel_guc_fini(dev_priv);
> +	intel_huc_fini(dev);

Hmm, still not dev_priv?


>  	i915_gem_fini(dev_priv);
>  	intel_fbc_cleanup_cfb(dev_priv);
>  
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index b84c1d1..2a17df2 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2073,6 +2073,7 @@ struct drm_i915_private {
>  
>  	struct intel_gvt *gvt;
>  
> +	struct intel_huc huc;
>  	struct intel_guc guc;
>  
>  	struct intel_csr csr;
> @@ -2847,6 +2848,7 @@ intel_info(const struct drm_i915_private *dev_priv)
>  #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
>  #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
>  #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
> +#define HAS_HUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
>  
>  #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
>  
> diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
> index 6a0adaf..35cf991 100644
> --- a/drivers/gpu/drm/i915/i915_guc_reg.h
> +++ b/drivers/gpu/drm/i915/i915_guc_reg.h
> @@ -61,12 +61,18 @@
>  #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
>  #define DMA_COPY_SIZE			_MMIO(0xc310)
>  #define DMA_CTRL			_MMIO(0xc314)
> +#define   HUC_UKERNEL			  (1<<9)
>  #define   UOS_MOVE			  (1<<4)
>  #define   START_DMA			  (1<<0)
>  #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
> +#define   HUC_LOADING_AGENT_VCR		  (0<<1)
> +#define   HUC_LOADING_AGENT_GUC		  (1<<1)
>  #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
>  #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
>  
> +#define HUC_STATUS2             _MMIO(0xD3B0)
> +#define   HUC_FW_VERIFIED       (1<<7)
> +
>  /* Defines WOPCM space available to GuC firmware */
>  #define GUC_WOPCM_SIZE			_MMIO(0xc050)
>  /* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
> diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
> index a7a4cd4..3b05232 100644
> --- a/drivers/gpu/drm/i915/intel_guc_loader.c
> +++ b/drivers/gpu/drm/i915/intel_guc_loader.c
> @@ -334,7 +334,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
>  	return ret;
>  }
>  
> -static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
> +u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv)
>  {
>  	u32 wopcm_size = GUC_WOPCM_TOP;
>  
> @@ -372,7 +372,7 @@ static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
>  	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
>  
>  	/* init WOPCM */
> -	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
> +	I915_WRITE(GUC_WOPCM_SIZE, intel_guc_wopcm_size(dev_priv));
>  	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
>  
>  	/* Enable MIA caching. GuC clock gating is disabled. */
> @@ -511,6 +511,7 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
>  		if (err)
>  			goto fail;
>  
> +		intel_huc_load(dev_priv);
>  		err = guc_ucode_xfer(dev_priv);
>  		if (!err)
>  			break;
> @@ -658,7 +659,7 @@ void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
>  		size = uc_fw->header_size + uc_fw->ucode_size;
>  
>  		/* Top 32k of WOPCM is reserved (8K stack + 24k RC6 context). */
> -		if (size > guc_wopcm_size(dev_priv)) {
> +		if (size > intel_guc_wopcm_size(dev_priv)) {
>  			DRM_ERROR("Firmware is too large to fit in WOPCM\n");
>  			goto fail;
>  		}
> diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c
> new file mode 100644
> index 0000000..194c908
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_huc_loader.c
> @@ -0,0 +1,265 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +#include <linux/firmware.h>
> +#include "i915_drv.h"
> +#include "intel_uc.h"
> +
> +/**
> + * DOC: HuC Firmware
> + *
> + * Motivation:
> + * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
> + * Efficiency Video Coding) operations. Userspace can use the firmware
> + * capabilities by adding HuC specific commands to batch buffers.
> + *
> + * Implementation:
> + * The same firmware loader is used as the GuC. However, the actual
> + * loading to HW is deferred until GEM initialization is done.
> + *
> + * Note that HuC firmware loading must be done before GuC loading.
> + */
> +
> +#define SKL_HUC_FW_MAJOR 01
> +#define SKL_HUC_FW_MINOR 07
> +#define SKL_BLD_NUM 1398
> +
> +#define HUC_FW_PATH(platform, major, minor, bld_num) \
> +	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
> +	__stringify(minor) "_" __stringify(bld_num) ".bin"
> +
> +#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_HUC_FW_MAJOR, \
> +	SKL_HUC_FW_MINOR, SKL_BLD_NUM)
> +MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
> +
> +/**
> + * huc_ucode_xfer() - DMA's the firmware
> + * @dev_priv: the drm device

This is 'private' i915 device, not just drm


> + *
> + * Transfer the firmware image to RAM for execution by the microcontroller.
> + *
> + * Return: 0 on success, non-zero on failure
> + */
> +static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
> +{
> +	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
> +	struct i915_vma *vma;
> +	unsigned long offset = 0;
> +	u32 size;
> +	int ret;
> +
> +	ret = i915_gem_object_set_to_gtt_domain(huc_fw->obj, false);
> +	if (ret) {
> +		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
> +		return ret;
> +	}
> +
> +	vma = i915_gem_object_ggtt_pin(huc_fw->obj, NULL, 0, 0, 0);
> +	if (IS_ERR(vma)) {
> +		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
> +		return PTR_ERR(vma);
> +	}
> +
> +	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
> +	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
> +
> +	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
> +
> +	/* init WOPCM */
> +	I915_WRITE(GUC_WOPCM_SIZE, intel_guc_wopcm_size(dev_priv));
> +	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
> +			HUC_LOADING_AGENT_GUC);
> +
> +	/* Set the source address for the uCode */
> +	offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
> +	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
> +	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
> +
> +	/* Hardware doesn't look at destination address for HuC. Set it to 0,
> +	 * but still program the correct address space.
> +	 */
> +	I915_WRITE(DMA_ADDR_1_LOW, 0);
> +	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
> +
> +	size = huc_fw->header_size + huc_fw->ucode_size;
> +	I915_WRITE(DMA_COPY_SIZE, size);
> +
> +	/* Start the DMA */
> +	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
> +
> +	/* Wait for DMA to finish */
> +	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
> +
> +	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
> +
> +	/* Disable the bits once DMA is over */
> +	I915_WRITE(DMA_CTRL, _MASKED_BIT_DISABLE(HUC_UKERNEL);
> +
> +	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> +
> +	/*
> +	 * We keep the object pages for reuse during resume. But we can unpin it
> +	 * now that DMA has completed, so it doesn't continue to take up space.
> +	 */
> +	i915_vma_unpin(vma);
> +
> +	return ret;
> +}
> +
> +/**
> + * intel_huc_init() - initiate HuC firmware loading request
> + * @dev_priv: the drm_i915_private device
> + *
> + * Called early during driver load, but after GEM is initialised. The loading
> + * will continue only when driver explicitly specify firmware name and version.
> + * All other cases are considered as INTEL_UC_FIRMWARE_NONE either because HW
> + * is not capable or driver yet support it. And there will be no error message
> + * for INTEL_UC_FIRMWARE_NONE cases.
> + *
> + * The DMA-copying to HW is done later when intel_huc_load() is called.
> + */
> +void intel_huc_init(struct drm_i915_private *dev_priv)
> +{
> +	struct intel_huc *huc = &dev_priv->huc;
> +	struct intel_uc_fw *huc_fw = &huc->fw;
> +	const char *fw_path = NULL;
> +
> +	huc_fw->path = NULL;
> +	huc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
> +	huc_fw->load_status = INTEL_UC_FIRMWARE_NONE;
> +	huc_fw->fw = INTEL_UC_FW_TYPE_HUC;
> +
> +	if (!HAS_HUC_UCODE(dev_priv))
> +		return;
> +
> +	if (IS_SKYLAKE(dev_priv)) {
> +		fw_path = I915_SKL_HUC_UCODE;
> +		huc_fw->major_ver_wanted = SKL_HUC_FW_MAJOR;
> +		huc_fw->minor_ver_wanted = SKL_HUC_FW_MINOR;
> +	}
> +
> +	huc_fw->path = fw_path;
> +	huc_fw->fetch_status = INTEL_UC_FIRMWARE_PENDING;
> +
> +	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
> +
> +	WARN(huc_fw->path == NULL, "HuC present but no fw path\n");
> +
> +	intel_uc_fw_fetch(dev_priv, huc_fw);
> +}
> +
> +/**
> + * intel_huc_load() - load HuC uCode to device
> + * @dev_priv: the drm_i915_private device
> + *
> + * Called from guc_setup() during driver loading and also after a GPU reset.
> + * Be note that HuC loading must be done before GuC loading.
> + *
> + * The firmware image should have already been fetched into memory by the
> + * earlier call to intel_huc_init(), so here we need only check that
> + * is succeeded, and then transfer the image to the h/w.
> + *
> + * Return:	non-zero code on error
> + */
> +int intel_huc_load(struct drm_i915_private *dev_priv)
> +{
> +	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
> +	int err;
> +
> +	if (huc_fw->fetch_status == INTEL_UC_FIRMWARE_NONE)
> +		return 0;
> +
> +	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
> +		huc_fw->path,
> +		intel_uc_fw_status_repr(huc_fw->fetch_status),
> +		intel_uc_fw_status_repr(huc_fw->load_status));
> +
> +	if (huc_fw->fetch_status == INTEL_UC_FIRMWARE_SUCCESS &&
> +	    huc_fw->load_status == INTEL_UC_FIRMWARE_FAIL)
> +		return -ENOEXEC;
> +
> +	huc_fw->load_status = INTEL_UC_FIRMWARE_PENDING;
> +
> +	switch (huc_fw->fetch_status) {
> +	case INTEL_UC_FIRMWARE_FAIL:
> +		/* something went wrong :( */
> +		err = -EIO;
> +		goto fail;
> +
> +	case INTEL_UC_FIRMWARE_NONE:
> +	case INTEL_UC_FIRMWARE_PENDING:
> +	default:
> +		/* "can't happen" */
> +		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
> +			huc_fw->path,
> +			intel_uc_fw_status_repr(huc_fw->fetch_status),
> +			huc_fw->fetch_status);
> +		err = -ENXIO;
> +		goto fail;
> +
> +	case INTEL_UC_FIRMWARE_SUCCESS:
> +		break;
> +	}
> +
> +	err = huc_ucode_xfer(dev_priv);
> +	if (err)
> +		goto fail;
> +
> +	huc_fw->load_status = INTEL_UC_FIRMWARE_SUCCESS;
> +
> +	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
> +		huc_fw->path,
> +		intel_uc_fw_status_repr(huc_fw->fetch_status),
> +		intel_uc_fw_status_repr(huc_fw->load_status));
> +
> +	return 0;
> +
> +fail:
> +	if (huc_fw->load_status == INTEL_UC_FIRMWARE_PENDING)
> +		huc_fw->load_status = INTEL_UC_FIRMWARE_FAIL;
> +
> +	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
> +
> +	return err;
> +}
> +
> +/**
> + * intel_huc_fini() - clean up resources allocated for HuC
> + * @dev: the drm device
> + *
> + * Cleans up by releasing the huc firmware GEM obj.
> + */
> +void intel_huc_fini(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(dev);

You are using dev_priv here, so why not pass it as param like all other functions?


> +	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
> +
> +	mutex_lock(&dev->struct_mutex);
> +	if (huc_fw->obj)
> +		i915_gem_object_put(huc_fw->obj);
> +	huc_fw->obj = NULL;
> +	mutex_unlock(&dev->struct_mutex);
> +
> +	huc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
> +}
> +
> diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
> index ce04105..bf1741b 100644
> --- a/drivers/gpu/drm/i915/intel_uc.h
> +++ b/drivers/gpu/drm/i915/intel_uc.h
> @@ -176,6 +176,13 @@ struct intel_guc {
>  	struct mutex send_mutex;
>  };
>  
> +struct intel_huc {
> +	/* Generic uC firmware management */
> +	struct intel_uc_fw fw;
> +
> +	/* HuC-specific additions */
> +};
> +
>  /* intel_uc.c */
>  void intel_uc_init_early(struct drm_i915_private *dev_priv);
>  int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len);
> @@ -191,6 +198,8 @@ extern void intel_guc_fini(struct drm_i915_private *dev_priv);
>  extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
>  extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
>  extern int intel_guc_resume(struct drm_i915_private *dev_priv);
> +void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
> +	struct intel_uc_fw *uc_fw);
>  u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv);
>  
>  /* i915_guc_submission.c */
> @@ -214,4 +223,9 @@ static inline u32 guc_ggtt_offset(struct i915_vma *vma)
>  	return offset;
>  }
>  
> +/* intel_huc_loader.c */
> +void intel_huc_init(struct drm_i915_private *dev_priv);
> +void intel_huc_fini(struct drm_device *dev);
> +int intel_huc_load(struct drm_i915_private *dev_priv);
> +
>  #endif
> -- 
> 2.7.4
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux