From: Jenkins Val <jenkins@xxxxxxxxx>
Signed-off-by: Jyoti Yadav <jyoti.r.yadav@xxxxxxxxx>
---
tests/Makefile.am | 3 +-
tests/Makefile.sources | 1 +
tests/mipi_sequence_verification.c | 201 +++++++++++++++++++++++++++++++++++++
3 files changed, 204 insertions(+), 1 deletion(-)
create mode 100644 tests/mipi_sequence_verification.c
diff --git a/tests/Makefile.am b/tests/Makefile.am
index a408126..5b938a2 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -61,6 +61,7 @@ AM_CFLAGS = $(DRM_CFLAGS) $(CWARNFLAGS) -Wno-unused-result $(DEBUG_CFLAGS)\
-DIGT_SRCDIR=\""$(abs_srcdir)"\" \
-DIGT_DATADIR=\""$(pkgdatadir)"\" \
$(LIBUNWIND_CFLAGS) $(WERROR_CFLAGS) \
+ -I/usr/include/libxml2 \
$(NULL)
LDADD = ../lib/libintel_tools.la $(GLIB_LIBS)
@@ -104,7 +105,7 @@ gem_userptr_blits_LDADD = $(LDADD) -lpthread
gem_wait_LDADD = $(LDADD) -lrt
kms_flip_LDADD = $(LDADD) -lrt -lpthread
pm_rc6_residency_LDADD = $(LDADD) -lrt
-
+mipi_sequence_verification.c = $(LDADD) -lxml2
prime_nv_test_CFLAGS = $(AM_CFLAGS) $(DRM_NOUVEAU_CFLAGS)
prime_nv_test_LDADD = $(LDADD) $(DRM_NOUVEAU_LIBS)
prime_nv_api_CFLAGS = $(AM_CFLAGS) $(DRM_NOUVEAU_CFLAGS)
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 598ec6f..8d9696d 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -211,6 +211,7 @@ TESTS_progs = \
kms_pwrite_crc \
kms_sink_crc_basic \
prime_udl \
+ mipi_sequence_verification \
$(NULL)
# IMPORTANT: The ZZ_ tests need to be run last!
diff --git a/tests/mipi_sequence_verification.c b/tests/mipi_sequence_verification.c
new file mode 100644
index 0000000..378ccd2
--- /dev/null
+++ b/tests/mipi_sequence_verification.c
@@ -0,0 +1,201 @@
+/*
+ * "MIPI enable/disable sequence verification" Test Design:
+ * This patch is all about test design to verify mipi enable/disable sequence
+ mentioned in BSpec.
+ *
+ * Targeted Platform: BXT(including) onwards.
+ * Test Input:
+ a). XML file which details about mipi enable/disable sequence
+ mentioned in BSpec.
+ This file contain data about each regsiters which need to
+ be programmed.
+ Following tags are used in XML file.
+ 1. <Sequence> tag describes which sequence it is --> enable
+ sequence or disable sequence.
+ 2. <Step> tag describes about subtasks which need to be
+ completed in an order for the enable/disable sequence
+ to be completed.
+ 3. </Register> tag descibes about particular register's name
+ ,offset and time when it was programmed.
+ A <Step> tag mentions about list of registers which need
+ to be programmed as part of that subtask.
+ 4. </Factor> tag describes about particular bit which need
+ to be programmed in a register. Here we maintain mask
+ and value field.
+
+ Below snippet is about XML file.
+ Two subtasks for mipi enable sequence are presented in XML form.
+
+ <Sequence name="mipi_enable_sequence">
+
+ <Step name="Enable_power_well_2">
+ <Register name="PWR_WELL_CTL2" offset="45404" time ="0">
+ <Factor name="PWR_WELL_2_ENABLE" mask="80000000" value="80000000">
+ </Factor>
+ </Register>
+ </Step>
+
+ <Step name="Configure_and_enable_MIPI_clocks">
+ <Register name="DSI_PLL_CTL" offset="161000" time="0">
+ </Register>
+ <Register name="MIPI_CLOCK_CTL" offset="46090" time="0">
+ </Register>
+ <Register name="DSI_PLL_ENABLE" offset="46080" time="0">
+ <Factor name="PLL_ENABLE" mask="80000000" value="80000000">
+ </Factor>
+ </Register>
+ </Step>
+
+ </Sequence>
+
+ b) Another input to the test is Dmesg Log file. This log file
+ includes our customized logs apart from other dmesg logs.
+ Customized logs are enabled with one patch, which inserts some
+ printk message, when mipi related registers are written.
+ Our customized logs are for those registers which are related to
+ mipi enable/disable sequence.
+ This is how customized logs looks like.
+
+ [ 1.754127] dbg_gen9_write32 : 0x45404 0x70000000
+ [ 1.754173] dbg_gen9_write32 : 0x138090 0x3
+
+ 1 log line contains "time" value, "dbg_gen9_write32",string to
+ distinguish our customized message, "register_offset" and
+ "register_value".
+
+How test works:
+
+ 1. For particular sequence, test will pick one by one registers from
+ steps of the sequence, and will try to find this register offset in
+ the log file, if register offset and value matches, then we
+ store time of the register, in the "time" attribute of <Register> tag
+ in XML file.
+
+ 2. Once we store time of each register(mentioned in XML file), from the
+ dmesg log file, then we check order between each <Step> is maintained
+ or not.
+ "time" values for all the registers in Step 1 should be less than the
+ "time" values for all the registers in Step 2.
+
+ 3. If this order is maintained between all the Steps in the Sequence,
+ then test is Passed, otherwise not.
+
+Library used: libxml library is used to parse XML file.
+*/
+code snippet:
+/* command line parameters.*/
+struct cmd_param {
+ char *xml_filename;
+ char *dmesg_log_filename;
+};
+static struct cmd_param opt = {
+ .xml_filename = "./tests/mipi_sequence.xml";
+ .dmesg_log_filename = "./test/bxt_dmesg.log"
+};
+
+static int opt_handler(int option, int option_index, void *input)
+{
+ switch (option) {
+ case 'x':
+ opt.xml_filename = optarg;
+ break;
+ case 'd':
+ opt.dmesg_log_filename = optarg;
+ break;
+ default:
+ igt_assert(false);
+ }
+
+ return 0;
+}
+
+int
+main(int argc, char **argv)
+{
+ int fd;
+ int gen;
+ xmlDoc *document;
+ xmlNode *root, *first_child, *node;
+ FILE *fp;
+ fd = drm_open_driver_master(DRIVER_ANY);
+ if (!is_i915_device(fd))
+ return 0;
+ gen = intel_gen(intel_get_drm_devid(fd));
+ igt_skip_on(gen < 9);
+ const char *help_str =
+ " --xml\t\tXml file contains mipi enable/disable sequence mentioned in BSpec.\n \
+ --dmesg_log_file\t\t Dmesg logs collected after applying patch which enabled custom logs";
+ struct option long_opts[] = {
+ {"xml", required_arguement, 0, 'x'},
+ {"dmesg_log_file", required_arguement, 'd'},
+ {"help", 0, 0, 'h'},
+ {0, 0, 0, 0}
+ };
+ igt_subtest_init_parse_opts(&argc, argv, "", long_opts,
+ help_str, opt_handler, NULL);
+ igt_skip_on_simulation();
+ fp = fopen(opt.dmesg_log_filename, "r");
+ igt_assert(fp);
+ /* extract_custom_logs() function will extract customized logs from
+ * dmesg log file and will return an array of custom log lines
+ * which are tokenized. Tokens will be "time", "offset" and "value".
+ */
+ int size1, size2 = 0;
+ char ***enable_seq_logs = extract_custom_logs(fp, "MIPI_ENABLE_SEQ",
+ &size1);
+ char ***disable_seq_logs = extract_customized_logs(fp,
+ "MIPI_DISABLE_SEQ",
+ &size2);
+ document = xmlReadFile(opt.xml_filename, NULL, 0);
+ root = xmlDocGetRootElement(document);
+ /* first_child will be <Sequence> node.*/
+ first_child = root->children;
+ for (node = first_child; node; node = node->next) {
+ if (node->type == XML_ELEMENT_NODE) {
+ /* <Step> nodes will be children of
+ * <Sequence> node.
+ */
+ xmlNode *step_root = node->children;
+ xmlNode *step_temp_node = step_root;
+ for (step_temp_node = step_root; step_temp_node;
+ step_temp_node = step_temp_node->next) {
+ if (step_temp_node->type == XML_ELEMENT_NODE) {
+ /* <Register> node will be children of
+ * <Step> node.
+ */
+ xmlNode *reg_root =
+ step_temp_node->children;
+ xmlNode *reg_temp_node = reg_root;
+ for (reg_temp_node = reg_root;
+ temp_node;
+ temp_node = temp_node->next) {
+ if (temp_node->type ==
+ XML_ELEMENT_NODE) {
+ int it = 0;
+ /* found flag to check
+ * that register is
+ * found in the logs.
+ */
+ int found = 0;
+ /* check register in log
+ * array.
+ */
+ found = check_reg(
+ temp_node,
+ enable_seq_logs,
+ size1)
+ ;
+ }
+ }
+ }
+ }
+ }
+ /* TODO: when we arrive here, we have stored time of each
+ * register in the XML file, from the dmesg logs when it is
+ * programmed.
+ * Now we have to see that registers are programmed in the order
+ * which is mentioned in Bspec, based on timing information.
+ */
+ }
+ igt_exit();
+}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
