Hi Bob,
On Tue, 2016-12-20 at 09:53 -0800, Bob Paauwe wrote:
> On Tue, 13 Dec 2016 16:11:20 +0200
> Jani Nikula <jani.nikula@xxxxxxxxx> wrote:
>
> >
> > On Mon, 05 Dec 2016, Mika Kahola <mika.kahola@xxxxxxxxx> wrote:
> > >
> > > From: Jani Nikula <jani.nikula@xxxxxxxxx>
> > >
> > > Request the GPIO by index through the consumer API. For now, use
> > > a quick
> > > hack to store the already requested ones, simply because I have
> > > no idea
> > > whether this actually works or not, and I have no way to test it.
> > >
> > > v2: switch *NULL* to *"panel"* when requesting gpio for MIPI/DSI
> > > panel. (Mika)
> > >
> Jani, Mika,
>
> I'm working on getting a dual-link MIPI panel working on BXT and have
> a
> problem getting the proper GPIO pins set. This patch gets things
> closer, but at least for the platform I'm working on, there's one
> GPIO
> pin (backlight/panel control) that doesn't seem to be available via
> the
> consumer API. If I use the alternate#2 method that Jani posted
> (legacy GPIO API) along with the proper defines I can set this pin.
> I'm
> using:
>
>
> #define BXT_PANEL1_VDDEN_PIN 196
> #define BXT_PANEL1_BKLTEN_PIN 197
> #define BXT_PANEL1_BKLTCTL_PIN 198
>
> #define BXT_PANEL1_VDDEN_OFFSET 366
> #define BXT_PANEL1_BKLTEN_OFFSET 367
> #define BXT_PANEL1_BKLTCTL_OFFSET 368
>
> to create my GPIO table.
>
> These three pins need to be set VDDEN, BKLTCTL, BKLTEN, in that order
> to get the panel to turn on.
>
> For testing, I have a call in the vbt_panel_prepare() to set the pin
> and one in vbt_panel_unprepare() to clear it. That works but that
> doesn't seem like the right solution. I was wondering if either of
> you
> have any insights?
Do you see these warnings in dmesg such as 'GPIO index x request
failed'? This is what you should see if the pin can't be accessed.
Can you see all of these GPIO pins in /sys/kernel/debug/gpio file?
And you also need to enable pincontrol for Broxton in kernel config
CONFIG_PINCTRL_BROXTON=y
> Bob
>
> >
> > >
> > > Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> > > Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> > Pushed to dinq.
> >
> > BR,
> > Jani.
> >
> > >
> > > ---
> > > drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 38
> > > +++++++++++++++++++++++++-----
> > > 1 file changed, 32 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> > > b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> > > index 0d8ff00..dda678b 100644
> > > --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> > > +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> > > @@ -29,6 +29,7 @@
> > > #include <drm/drm_edid.h>
> > > #include <drm/i915_drm.h>
> > > #include <drm/drm_panel.h>
> > > +#include <linux/gpio/consumer.h>
> > > #include <linux/slab.h>
> > > #include <video/mipi_display.h>
> > > #include <asm/intel-mid.h>
> > > @@ -304,19 +305,44 @@ static void chv_exec_gpio(struct
> > > drm_i915_private *dev_priv,
> > > mutex_unlock(&dev_priv->sb_lock);
> > > }
> > >
> > > +static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
> > > + u8 gpio_source, u8 gpio_index, bool
> > > value)
> > > +{
> > > + /* XXX: this table is a quick ugly hack. */
> > > + static struct gpio_desc *bxt_gpio_table[U8_MAX + 1];
> > > + struct gpio_desc *gpio_desc =
> > > bxt_gpio_table[gpio_index];
> > > +
> > > + if (!gpio_desc) {
> > > + gpio_desc = devm_gpiod_get_index(dev_priv-
> > > >drm.dev,
> > > + "panel",
> > > gpio_index,
> > > + value ?
> > > GPIOD_OUT_LOW :
> > > + GPIOD_OUT_HIGH)
> > > ;
> > > +
> > > + if (IS_ERR_OR_NULL(gpio_desc)) {
> > > + DRM_ERROR("GPIO index %u request failed
> > > (%ld)\n",
> > > + gpio_index,
> > > PTR_ERR(gpio_desc));
> > > + return;
> > > + }
> > > +
> > > + bxt_gpio_table[gpio_index] = gpio_desc;
> > > + }
> > > +
> > > + gpiod_set_value(gpio_desc, value);
> > > +}
> > > +
> > > static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi,
> > > const u8 *data)
> > > {
> > > struct drm_device *dev = intel_dsi->base.base.dev;
> > > struct drm_i915_private *dev_priv = to_i915(dev);
> > > - u8 gpio_source, gpio_index;
> > > + u8 gpio_source, gpio_index = 0, gpio_number;
> > > bool value;
> > >
> > > DRM_DEBUG_KMS("\n");
> > >
> > > if (dev_priv->vbt.dsi.seq_version >= 3)
> > > - data++;
> > > + gpio_index = *data++;
> > >
> > > - gpio_index = *data++;
> > > + gpio_number = *data++;
> > >
> > > /* gpio source in sequence v2 only */
> > > if (dev_priv->vbt.dsi.seq_version == 2)
> > > @@ -328,11 +354,11 @@ static const u8 *mipi_exec_gpio(struct
> > > intel_dsi *intel_dsi, const u8 *data)
> > > value = *data++ & 1;
> > >
> > > if (IS_VALLEYVIEW(dev_priv))
> > > - vlv_exec_gpio(dev_priv, gpio_source, gpio_index,
> > > value);
> > > + vlv_exec_gpio(dev_priv, gpio_source,
> > > gpio_number, value);
> > > else if (IS_CHERRYVIEW(dev_priv))
> > > - chv_exec_gpio(dev_priv, gpio_source, gpio_index,
> > > value);
> > > + chv_exec_gpio(dev_priv, gpio_source,
> > > gpio_number, value);
> > > else
> > > - DRM_DEBUG_KMS("GPIO element not supported on
> > > this platform\n");
> > > + bxt_exec_gpio(dev_priv, gpio_source, gpio_index,
> > > value);
> > >
> > > return data;
> > > }
>
>
--
Mika Kahola - Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
